• 제목/요약/키워드: Circular water channel

검색결과 65건 처리시간 0.021초

하수관 등류수심 양해법 산정식 (Explicit Equations of Normal Depth for Drainage Pipes)

  • 유동훈;노정수
    • 한국수자원학회논문집
    • /
    • 제38권7호
    • /
    • pp.527-535
    • /
    • 2005
  • 등류수심의 산정은 수로 설계 및 흐름 해석에 있어 매우 중요하다. 하수관은 삼각형 또는 사각형의 인공 개수로와 달리 원형, U형과 같이 곡률을 갖는 경우가 일반적이며, 이 경우 수심에 따른 통수단면적 및 동수반경의 변화가 일정하지 않으므로 등류수심 산정 또는 수식 유도에 있어 상당한 어려움을 갖는다. 그러나 단면적과 관경의 비 또는 동수반경과 관경의 비를 수심대 관경의 비로 표기하여 지수형으로 나타내면 수식의 전개과정이 매우 용이해지며, 양해법 산정식의 개발이 가능해진다. 따라서 본 고에서는 우선 실무에서 가장 많이 사용하고 있는 원형 개수로와 U형 개수로에 대한 등류수심 양해법 산정식을 제시하며, 완난류 지수형 마찰계수 산정식과 더불어 실무에서 주로 사용되는 Hagen (Manning) 산정식을 이용한 등류수심 산정식도 제시하였다.

연속 맨홀에서의 손실계수 산정 (An Estimation of Head Loss Coefficients at Continuous Circular Manhole)

  • 윤영노;김정수;한정석;윤세의
    • 한국방재학회:학술대회논문집
    • /
    • 한국방재학회 2008년도 정기총회 및 학술발표대회
    • /
    • pp.731-734
    • /
    • 2008
  • Urban sewer systems are designed to operate in open-channel flow regime and energy loss at circular manholes are usually not significant. However, the energy loss at manholes, often exceeding the friction loss of pipes under surcharge flow, is considered as one of the major causes of inundation in urban area. Therefore, it is necessary to analyze the head loss associated with manholes, especially in surcharge flow. Hydraulic experimental apparatus with two circular manholes was installed for this study. The range of the experimental discharges were from $1.0\ell/sec$ to $4.4\ell/sec$. Head loss coefficient was maximum because of strong oscillation of water surface when the range of manhole depth ratios$(h_m/D_{in})$ were from 1,2 to 1.25. The average head loss coefficients for upstream manhole and downstream manhole were 0.58 and 0.23 respectively. Head loss at upstream manhole is nearly 2.5 times more than one at downstream manhole.

  • PDF

비만관 상태의 원형관로에서 수위에 따른 속도분포의 상사성 (A Similarity of the Velocity Profiles According to Water Depth in Partially Filled Circular Pipe Flows)

  • 윤지인;김영배;성재용;이명호
    • 한국가시화정보학회지
    • /
    • 제6권2호
    • /
    • pp.28-32
    • /
    • 2008
  • Contrary to the flow rate in fully filled pipe flows, the flow rate in partially filled pipe flows is significantly influenced by the variation of water level, channel slop, and so on. The major difference in these two flows results from the existence of a free surface. To make it clear, in the present study, a similarity of the velocity profile in a partially filled circular pipe has been investigated according to the water level. A particle image velocimetry (PIV) technique was applied to measure the three-dimensional velocity profiles. As a result, there is found a similarity of the velocity profile near the central region. However, near the side wall, the similarity is broken due to the interaction between the wall and the free surface.

중합제 첨가에 의한 항력 감소 효과에 관한 실험적 연구 (Experimental Investigation of Drag Reduction by Polymer Additives)

  • 성형진;위장우;권순홍;전호환
    • 한국해양공학회지
    • /
    • 제16권4호
    • /
    • pp.1-6
    • /
    • 2002
  • Experimental investigation of drag reduction by adding a polymer additive(polyacrylamid, N-401P) into water is carried out in a Circular Water Channel. The effect of viscosity, surface roughness and degradation as a function of running time is also measured with varying the concentration of polymer additives(20ppm,100ppm) and Reynolds numbers. Near and far wakes past a circular cylinder are observed by LDV. Drag forces are measured with a strain-gaged device. The experimental results show that around 5%-30% of drag reduction with the polymer solution are observed. The larger effects of drag reduction can be found at low range of Reynolds number, more roughened surface cylinder. The effect of polymer solution for near wakes is larger than for far wakes.

PIV 속도장 측정기법을 이용한 링 후류 유동구조에 대한 실험적 연구 (Investigation on Flow Structure behind Circular and Elliptical Ring by Particle Image Velocimetry)

  • 김승곤;김석;이상준
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.312-315
    • /
    • 2008
  • The flow structure behind circular and elliptical type rings embedded in a cross-flow was investigated experimentally using two-frame particle image velocimetry (PIV). The experiments were performed in a circulating water channel with a test section of 0.35m height ${\times}$ 0.3m width ${\times}$ 1.1m length. PIV measurements were carried out with varying the Reynolds number in the range of 4.5 ${\times}$ $10^2$ - 4.5 ${\times}$ $10^3$. In the present study, turbulent flow structures in the stream-wise direction and span-wise direction were investigated. The mean velocity field distribution was obtained by statistical-averaging instantaneous velocity fields. The spatial distributions of turbulent statistics such as turbulent intensities and turbulent kinetic energy were also investigated.

  • PDF

Investigation of Single Phase Frictional Pressure Loss in Circular Micro Tubes

  • Han Dong-Hyouck;Lee Kyu-Jung
    • Journal of Mechanical Science and Technology
    • /
    • 제20권8호
    • /
    • pp.1284-1291
    • /
    • 2006
  • Single phase pressure drops in micro tubes were investigated through an experimental measurement and a numerical simulation. Experimental Po was obtained in circular micro tubes with 87 and $118{\mu}m$ diameter with distilled water. Experiments were carried out in laminar flow region with varying the Re 15-450 for the $87{\mu}m$ diameter tubes and 60-1300 for the $118{\mu}m$ diameter tube. No early transition from laminar to turbulent flow was detected for the experimental range. The computational estimation of pressure drop in the $87{\mu}m$ diameter tube was performed with the aid of CFD software. Boundary conditions from experiments were used for the numerical simulation. The results of experimental and numerical studies showed a good agreement with the conventional macro theory.

The Characteristics of Two-Phase Flow Distribution in a Bottom Dividing Header

  • Im, Yang-Bin;Kim, Jang-Soo
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권8호
    • /
    • pp.1195-1202
    • /
    • 2004
  • In this paper an experimental study was investigated for two-phase flow distribution in compact heat exchanger header. A test section was consisted of the horizontal bottom dividing header($\phi$: 5 mm, L: 80 mm) and 10 upward circular mini channels ($\phi$: 1.5 mm, L: 850 mm) using an acrylic tube. Three different types of tube intrusion depth were tested for the mass flux and inlet mass quality ranges of 50 - 200 kg/$m^2$s and 0.1 - 0.3, respectively. Air and water were used as the test fluids. The distribution of vapor and liquid is obtained by measurement of the total mass flow rate and the calculation of the quality. Two-phase flow pattern was observed, and pressure drop of each channel was measured. By adjusting the intrusion depth of each channel an uniform liquid flow distribution through the each channel was able to solve the mal-distribution problem.

PIV를 사용한 2차원 원형 실린더 주위의 유동해석 (Flow Survey around Two-Dimensional Circular Cylinder using PIV Technique)

  • 박건선;곽영기
    • 한국해양공학회지
    • /
    • 제18권3호
    • /
    • pp.1-7
    • /
    • 2004
  • Flaw visualization and velocity field measurement methods have practical applications in the various fluid engineering fields, such as mechanics, ships, and heat fluids. In this study, the basic principles and theoretical methods are used to establish an application technique of Particle Imae Velocimetry(abbreviated to PIV below). Accordingly, the measured results of velocity field distribution of a section inside the Circulating Water Channel (abbreviated to CWC below) are computed using the PIV is presented. The uniformity of velocity distribution of the section in CWC is confirmed, by comparing this PIV data with the existing current meter data. Also, in order to measure the flaw fields of surroundings of 2-dimensional cylinder in the CWC, the flaw visualization technique using the PIV is applied.

유출과 부정류 관수로 흐름 계산에 관한 연구 (Runoff and Unsteady Pipe Flow Computation)

  • 전병호;이재철;권영하
    • 물과 미래
    • /
    • 제23권2호
    • /
    • pp.251-263
    • /
    • 1990
  • 본 연구의 목적은 도시 유역에서의 표면유출에 의한 맨홀 유입량을 추정하고 관망에서의 흐름을 해석하기 위한 모형을 개발하기 위한 것이다. 각 맨홀로의 유입량은 합리식을 이용한 단순방법으로 유입 수문곡선을 모의하는 방법과 해당유역 특성을 고려한 표면유출 모의에 의한 유입 수물곡선 결정방법이 이용된다. 관망에서의 흐름은 Saint-Venant공식의 dynamic equation에 유한음차분법(four-point implicit method)응 적용하여 동시해법으로 해석하였다. 특히 압력류(surcharge flow)흐름은 관의 상단에 좁고 긴 가상관을 연결시켜 모든 흐름을 개수로 흐름으로 해석가능 하도록 전환함으로써 해석의 단순화를 기하였고, 개발된 USS-slot모형이 부정류 우수관망 흐름을 적절히 모의할 수 있는가를 판별하기 위하여 기존에 연구된 관망에 적용하여 그 결과들을 비교 분석하였다.

  • PDF

흐름 메카니즘에 의한 깔따구들의 분포(I) - 인공수로 실험 - (The Distribution of Chironomids by Flow Mechanisms - Artificial Channel Measurement -)

  • 이상호;이정민;박재현;송미영
    • 한국물환경학회지
    • /
    • 제22권1호
    • /
    • pp.150-158
    • /
    • 2006
  • Over the past few years, many studies have been conducted on the flow, sediment movement, pollution transportation and scour etc. However, very few attempts have been made at the hydraulic studies reflecting upon the ecological function. The objective of this study is to examine the structures of the flow and turbulence in an open circular channel and their relationship to distribution of the organisms and chironomids. Under different flow conditions, the organic matter and some chironomids were injected into the channel. Using the obtained velocity data, the flow mechanisms and the turbulent shear stresses were analyzed. Organic matters and chironomids were distributed on the region that the velocity was slower and the turbulent shear stresses were smaller. Some habitat moved even though chironomids were inhabited. This phenomenon has relationship with the flow mechanism. Some chironomids have distributed around the habitat structure of a hemisphere. The secondary flow has affected the deposition of the organic matters and the distribution of chironomids.