• Journal of Korean Association for Spatial Structures
• /
• v.2 no.1 s.3
• /
• pp.93-102
• /
• 2002

Pressure loads caused by gas, water and wind are the most important load cases in structural analysis. Often the pressure loads are approximated by constant directional loads since it is difficult to evaluate the exact value. However, the pressure load is defined as a displacement dependent one and it is necessary to consider the follower effects of the load in analysis procedure. In this study, the large deformation analysis considering geometrical nonlinearity for shell structures under pressure loads is presented. Finite element by using a three-node flat triangular shell element is formulated and the follower effects of the pressure load are included in the formulation. Some of results are presented for cantilevered beam under uniform external pressure and thin circular ring under non-uniform external pressure. The present results are in good agreement with the results available in existing literature and commercial software ABAQUS.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.226-229
• /
• 2007

본 논문에서는 사각형 링을 갖는 UHF대 RFID 리더기용 소형 원편파 패치 안테나를 설계 제작하였다. 정사각형의 패치 안테나를 설계하고, 원편파를 위한 Truncated 패치 안테나를 설계한 후, 소형화를 위해 사각형의 링을 갖는 Truncated 패치 안테나를 설계하였다. 주파수 대역은 UHF대역인 902928MHz이며, 설계를 위하여 HFSS simulation올 사용하였다. 비유전율 4.3, 두께 1.6mm, 손실탄젠트 =0.019의 epoxy 기판을 사용하여 실현하였다. VSWR, 방사이득, RHCP, LHCP의 큰 변화없이 사각형의 링을 이용하여 기본 Truncated 안테나보다 6.37% 소형화시켰다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.302-305
• /
• 2002

본 논문에서는 기존의 원형 링 마이크로스트립 슬롯 안테나에 십자슬롯과 truncated를 통하여 원형편파를 구현할 수 있는 새로운 안테나 구조를 제안하였다. 금전구조는 입력단 설계가 간단하고 정함이 쉬운 전자파 결합방식을 사용하였고, Ansoft HFSS V8.0으로 최적화 한 후 제작 및 측정하였다. 제안된 안테나는 GPS(1.55MHz)대역에서 원형편파(RHCP, LHCP)특성을 만족하고, 각각의 안테나 구조에서 7.74%의 임피던스 대역폭(VSWR$\leq$2)을 갖고 안테나의 방사소자를 소형화하였다. 이는 기존의 월평 링 마이크로스트립 슬롯 안테나의 임피던스 대역폭 및 편파특성을 획기적으로 개선한 것이다.

• The Journal of the Korean dental association
• /
• v.25 no.12 s.223
• /
• pp.1145-1156
• /
• 1987

The purpose of this experimental study was to analyze the stress distribution from fixed partial dentures to the surrounding structures. This study was carried out on the experimental bridges with K-L blade, F.D.B.I.-11 type, F.D.B.I.-21 type, shape-memory metal blade and two-Apacerams as posterior abutment. The stress patterns and fringes were observed through the circular transmission polariscope. The results of this study were obtained as follows: 1. The stress was more concentrated to the roots apex than the implants. 2. In all blade implants, the stress was more concentrated to the distal side than the mesial side. 3. F.D.B.I.-11 type was more stress concentrated than the 21 type. 4. Shape-memory metal blade was the most effective for stress distribution. 5. Apacerams were more stress concentrated than the blde types and in the model of Apaceram with rubber-ring, anterior root was tipped distally.

• Structural Engineering and Mechanics
• /
• v.26 no.1
• /
• pp.87-97
• /
• 2007

Some mixed mode fracture criterion may be converted in to elliptical or ellipsoidal formula with the aid of mathematical translation. Hence, the crack initiation in mixed mode fracture I+II emanating from notches, has been studied using notched circular ring specimens. On the basis of Irwin (1957) theory, a new criteria in mixed mode fracture I+II, based fracture elliptic criterion and notch stress intensity factors has been developed.

• Journal of Korean Medical classics
• /
• v.17 no.4
• /
• pp.37-56
• /
• 2004

In the Circular flow of Meridians(經脈), the circulation of Nutrient Gi(營氣) is that the essence Gi(精氣) of food starts from Middle Cho(中焦), via heart and lung into the ring-type round of 12 Meridians(十二經脈) in turn of hand Meridians(水經) and foot Meridians(足經), Yang Meridians(陽經) and Eum Meridians(陰經). The circulation of Defensive Gi(衛氣) is that if going out from Eum part(陰分) into Yang part(陽分), is rounding on the Yang Meridians, if going out from Yang part into Eum part, is rounding on the five Jang(五臟) in order of Kidney(腎)-Heart(心)-Lung(肺)-Liver(肝)-Spleen(脾). Because the process of accumulating the essence Gi has a property of One-way flow, it flows from terminal to the direction of body trunk, has no distinct channel with its immaterial nature. and is concentrated on the lower part to that the five Jang belong.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.525-529
• /
• 2002

ANC technic can overcome the limited performance of passive noise control at the low frequency range. But it has the local quiet control region in general. In this paper, it is discussed that the global noise control in a circular duct using a ring type smart foam and a porous material. LMS algorithm and RLS algorithm are used to find optimal orders of cancellation path. Experiments are performed to compare the efficiency of RLS algorithm with that of LMS algorithm.

• Korean Journal of Optics and Photonics
• /
• v.2 no.1
• /
• pp.1-6
• /
• 1991

This paper describes the theoretical analysis of a diffraction pattern analyzer for the characterization of microscale object fields and a method for obtaining size and size distribution from the measured diffraction pattern of the object fields. For the experimental verification, a typical optical Fourier transform system was set up and calibrated with 2 5$\mu \textrm m$ and 50$\mu \textrm m$ pinholes. The system responses to distilled water droplets, alcohol, glycerin and silicon oil were imaged with vidicon, and the image was processed to determine the size distribution of each liquid particle field. The energy distribution function which is defined as the total intensity of a circular ring in the diffraction pattern was used to determine the dominant particle size of each liquid particle field.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.2
• /
• pp.13-22
• /
• 1994

A theoretical model is studied to describe the sound radiation by the surface vibration of in-service tires. The tire is modeled as a circular ring model. The effects of normalized frequency and structrual loss factor are included. Through numerical integration of the sound pressure, the radiated sound power is calculated as a fuction of normalized frequency and structural loss factor. The basic sound radiation mechanism is shown to be the damped progressive wave field on the structure in the vicinity of the applied force. The results indicate that the potential sound reduction might be obtained if values of normalized frequency and structural loss factor are investigated.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.179-180
• /
• 2012

Back ferrule is a circular ring shaped metallic object which is used for fastening, joining or reinforcement during the tube fitting as well as to prevent leakage. Therefore, during tube fitting the leading edge of the back ferrule should be sufficiently hard enough to prevent leakage. In our research, we concentrated the improvement of two major factors. Firstly, to improve the surface hardness of the back ferrule made by AISI 316 Stainless Steel. Secondly, the enhancement of corrosion resistance of back ferrule after plasma treatment. Initially, the corrosion resistance and hardness of the back ferrule (both commercial and without treated) was not good enough for tube fitting but after applying plasma treatment with suitable conditions on ferrule, we improved the corrosion resistance and hardness of the back ferrule dramatically.