• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.894-900
• /
• 2004

There are many types of circularly polarized(CP) microstrip antenna elements, which are used as a good unit radiator. Since an advantage of CP antenna is no strict alignment requirements between Rx and Tx system, the printed antennas with circular polarization are very often used in numerous satellite and mobile radio systems. In order to realize the broad bandwidth of 3 dB axial ratio and impedance of CP microstrip antenna, complex feed structure and tri-plate patch element have been researched. This paper describes a design of wideband microstrip cross slot array antennas with circular polarization. The proposed antenna is composed of an open-ended microstrip feed line as a feeder and a cross slot as a radiator for circular polarization. To realize the wide bandwidth, tri-plate structure are considered and cross slot is electromagnetically coupled with feed line. Optimum parameters of 1-element cross slot antenna are analyzed and designed by method of moments. These parameters are also applied to may antennas design considered the mutual coupling between radiating elements. Right hand circular polarization(RHCP) and left hand circular polarization(LHCP) of the proposed antenna are easily controlled by asymmetrical cross slot structure and slot position. In 1-element and 15-element cross slot array antenna, the good axial ratio of 1 dB below and the broad bandwidth characteristics of antenna are obtained.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.360-366
• /
• 2014

A single-feed composite cavity-backed four-arm curl antenna is presented for use in global positioning systems (GPS). Its primary radiating element is fed by a vacant-quarter printed ring, which helps the antenna directly match to a $50-{\Omega}$ coaxial line and produce a good circular polarization (CP). The cavity-backed reflector is employed to improve the CP radiation characteristics in terms of 3-dB axial ratio (AR) beamwidth and minimum AR value. The optimized design with an overall size of $90{\times}90{\times}25mm^3$ ($0.4725{\lambda}_o{\times}0.4725{\lambda}_o{\times}0.13{\lambda}_o$ at 1,575 MHz) results in a ${\mid}S_{11}{\mid}<-10dB$ bandwidth of 8.66% (1,514-1,651 MHz) and a 3-dB AR bandwidth of 2.23% (1,555-1,590 MHz). The antenna radiates a widebeam right-hand circular polarization and operates with a measured radiation efficiency greater than 90% within its impedance matching bandwidth.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.327-330
• /
• 2003

A novel compact circular polarization operation of the microstrip antenna with four-slits and T-slits is proposed. The mechanism for compact size antenna is investigated with the behavior of the currents on the radiating patch. The equivalent surface current path due to the slits is lengthened, reducing the resonant frequency at a fixed patch size. The proposed compact CP design can have an antenna size reduction of about 33 ∼ 45％ as compared to the conventional microstrip antenna. Details of the experimental and measured results are presented and analysed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.46-52
• /
• 2010

A compact circular microstrip patch antenna with a switchable circular polarization(CP) is proposed at 2.4 GHz. An unequal cross-shaped slot on a ground plane is utilized as a perturbation. By switching pin diodes mounted on the slot, the CP sense of each antenna can be simply switched from left-handed(LH) CP to right-handed(RH) CP vice versa. Since the perturbation can be made on the ground plane and no bias circuit is required on the patch side, the bias circuit has not effect on the main beam radiation. From the experimental results, the impedance bandwidth and CP bandwidth of the proposed antenna have shown up to 150 MHz and 35 MHz, respectively. The peak gain of the proposed antenna is 1.7 dBi for both CP senses.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.459-467
• /
• 2010

A new type of circularly polarized(CP) antenna that is characterized by having both low-profile and greater axial-ratio bandwidth(ARBW) beyond existing antennas is introduced through analysis of artificial magnetic conductor(AMC) polarizer, and experimentally demonstrated. Although it is made use of a linear-polarized dipole antenna with close proximity to ground plane, it is backed by AMC polarizer so as to efficiently radiate with circularly changed polarization whose ARBW is determined by the texture geometry, whereas existing antennas exhibit CP surface-current on radiators, which limit ARBW. The mechanism of the polarization conversion is theoretically analyzed for ARBW, and the experimental properties including the impedance matching, CP radiation pattern, axial-ratio pattern, ARBW, and two-port isolation are discussed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.78-84
• /
• 2008

In this paper, the reconfigurable annular ring slot antenna with circular polarization diversity is proposed for SDMB(Satellite Digital Multimedia Broadcasting) system. The proposed antenna consists of a ring slot with four tuning stubs. Four PIN diodes are attached to switch circular polarization diversity. By switching the diodes ON or OFF, the proposed antenna can be operated either RHCP mode or LHCP mode. The experimental result shows that the proposed antenna has an impedance bandwidth(VSWR${\leq}$2) of 570MHz(2.47-3.04GHz) at LHCP mode, an impedance bandwidth (VSWR${\leq}$2) of 560MHz(2.45-3.01GHz) at RHCP mode, a maximum gai of 3.1dBi at RHCP mode, 4.76dBi at LHCP mode. The 3dB CP bandwidth of about 100MHz at both RHCP and LHCP mode is achieved at the center frequency 2.63GHz. The proposed antenna is suitable for application such as mobile satellite communications, WLAN(Wireless Local Area Networks), and broadband wireless communication systems.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.103-109
• /
• 2006

In this paper, single-feed equilateral triangular microstrip antennas(ETMA) for circular polarization(CP) are designed and studied experimentally. It is demonstrated that by embedding a narrow slot or a cross of unequal slot lengths in the triangular patch circularly polarized radiation RHCP(right-hand circularly polarized wave), LHCP(left-hand circularly polarized wave) of microstrip antennas can easily be achieved using by strategically positioned coaxial single probe feed. And the size of a triangular microstrip patch antenna is smaller than that of a conventional rectangular or circular patch at a given frequency. A single-feed ETMA with a horizontal narrow slot is printed on the substrate of 60 mils thick and the other ETMA with a corss slot of unequal slot lengths is printed on the same substrate. The antenna radiation characteristics are calculated by ENSEMBLE(Ver. 5.0) software, and compared with the experimental results. This results show that the antenna size reduction of about $17%{\sim}2l%$ is obtained as compared to the regular-size CP design.

• Journal of electromagnetic engineering and science
• /
• v.5 no.1
• /
• pp.31-35
• /
• 2005

This paper presents low form factor dual polarized antenna incorporating low profile annular ring patch antenna having 90$^{\circ}$ phase delay element for circular polarization(CP) and a reactive-loaded monopole linear polarized(LP) antenna. Both types of receiving antennas operate in the same frequency region from 2.320 GHz to 2.345 GHz, while different polarizations are used to take advantage of polarization diversity. The proposed CP antenna has good broadside radiation patterns, while the LP antenna reveals monopole-like radiation patterns. The gains of the antennas are measured to be 1.93 dBi and 2.24 dBi for CP and LP, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.9
• /
• pp.679-684
• /
• 2017

This paper presents an UHF(Ultra High Frequency) band small cavity structured RFID(Radio Frequency Identification) tag antenna with a long reading range, designed to apply on metal cart or pallet for auto-parts logistics. The size of tag antennas is $140{\times}60{\times}10mm^3$, attached on a exporting metal cart, and it can give the information of inventory and logistics of carts. By collecting the exported carts and increasing the recovery rate of missing carts or pallets, the paid import tax can be refunded when the carts are returned back to the manufacture. The tag antenna was equipped with a cover to prevent damage, and the dielectric constant of the cover is considered for the simulation. The reading range of the tag antenna is 12 m using LP(Linear Polarization), 10 m with CP(Circular Polarization) reader antennas. This 920 MHz UHF RFID cavity tag ensures the long reading distance of the antenna regardless of the material of the object where it is attached.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.11 no.2
• /
• pp.34-38
• /
• 2012

In this paper, the particle swarm optimization (PSO) algorithm is adopted to design a modified ring-slot type patch rectenna with a resonance frequency of 2.45GHz. In order to accomplish minimization of dimensions and circular polarization (CP) and harmonic suppression, axial direction slits and side-cuts are added to the patch of the ring. The PSO manipulated this kind of multi-dimensional problem very well, and as a result, the designed rectenna shows a desirable performance of return loss of 21.36dB and axial ratio of 2.92dB at the frequency of 2.45GHz with compact sizing.