• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.32-35
• /
• 2003

Nonlinear parameterization of OLED device from measurements of bias dependence of impedance spectra and parameter extraction using Levenberg-Marquardt complex nonlinear least square regression algorithm based on resistor-capacitor equivalent circuit model enables computer simulation of OLED power driving characteristics in forms of square-wave or sinusoidal output signal at arbitrary conditions. We introduce developed OLED power driving simulation software and discuss transient responses in voltage-or current-controlled operations as well as nonlinear characteristics of OLED, by presenting both the simulation and experimental results. This OLED simulation technique using impedance spectroscopy is extremely useful in predicting performance of the nonlinear device, especially in time-domain analysis of device operation.

• ETRI Journal
• /
• 제31권2호
• /
• pp.225-227
• /
• 2009

A new planar metamaterial (MTM) with simultaneous negative values of permittivity (${\varepsilon}$) and permeability (${\mu}$) is proposed. Our MTM is composed of two identical copper patterns etched on both sides of dielectric laminate, which is very thin and easy to fabricate. Unlike conventional MTMs, the proposed structure shows a negative refractive index (NRI) behavior with respect to a normally incident wave. To explain the underlying principle of the NRI characteristics, an equivalent resonant circuit model based on surface current density distribution is investigated. An eigenmode analysis and a three-dimensional wave simulation for the stacked MTM prism are also performed to verify the existence of negative refraction. The experimental results from the transmission and reflection measurement ensure the validity of our design approach and show good agreement with the theoretically predicted effective medium parameters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1046-1048
• /
• 2004

Inductance is an important parameter determining the characteristics of current waveform in electric motors. There are many kinds of inductances, however, self and mutual inductances are the major components. These inductances are changed under the variation of the magnetic circuit, current, frequency etc., even in the same winding distribution. Therefore this paper deals with the characteristics of inductance according to the shape of stator tooth. The analysis model is newly developed motor made of SMC(Soft Magnetic Composite) to reduce the core loss in high speed. the result of this paper gives the basic understandings of inductance to extend the applications of the motors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1151-1153
• /
• 2003

In this paper, switching surge voltage distribution in stator windings of induction motor driven by IGBT PWM inverter is studied. To analyze the irregular voltage of stator winding, equivalent circuit model of inverter-cable-motor was proposed and high frequency parameter is computed by using finite element method (FEM). Electromagnetic transient program (EMTP) analysis of the whole system for induction motor and PWM inverter is proposed. In order to experiment, an induction motor, 380 [V], 50 [HP], with taps from one phase and a switching surge generator was built to consider the voltage distribution.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.17-20
• /
• 2002

In this paper voltage distribution in stator windings of induction motor driven by IGBT PWM inverter is studied. To analyze the irregular voltage of stator winding, equivalent circuit model of inverter-cable-motor was proposed and high frequency parameter is computed by using finite element method (FEM). Electro-magnetic transient program (EMTP) analysis of the whole system for induction motor and PWM inverter is proposed. Induction motor, 50[HP], and a switching surge generator was built to consider the voltage distribution. The results of EMTP analysis compared with experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.369-370
• /
• 2014

태양광 PCS개발과정에서는 온도나 방사량 등을 변화시키며 태양전지 패널의 I-V곡선을 모사할 수 있는 태양광 시뮬레이션 모델이 필요하다. 이러한 용도로 볼 때 특히 다이오드 기반의 등가회로 모델은 물리적인 성질을 바탕으로 태양광 패널의 특성을 비교적 정확히 설명할 수 있으나 특유의 비선형성으로 인하여 복잡한 회로 모델 파라미터 추출 기법을 필요로 한다. 본 논문에서는데이터 시트값에 기반한 새로운 태양광 패널 회로 모델링 알고리즘을 제안한다. 제안한 방법의 성능을 검증하기 위해 단결정 태양광 패널의 실제 데이터를 기반으로 최대전력점 ${\pm}10%$부근의 전류오차 적분값을 기준으로 기존 방법과 정확도를 비교한 결과 20%의 정확도 개선을 얻었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권1호
• /
• pp.36-39
• /
• 2019

This paper presents an analytic method to calculate energy conversion between electromagnetically coupled high-temperature superconducting and copper coils. The energy transfer from one coil to the other is commonly observed during quench of a no-insulation (NI) high temperature superconductor (HTS) magnet. Proper understanding of this phenomenon is particularly important to protect an NI HTS magnet, especially to avoid any potential mechanical damages. In this paper, analytic equations are obtained to estimate the energy transfer between the NI and copper coils. The well-known lumped-parameter circuit model is adopted provided that key parameters of the coils are given.

• International Journal of Computer Science & Network Security
• /
• 제22권1호
• /
• pp.121-128
• /
• 2022

There are much processing techniques of microwave circuits, whose dimensions are small compared to the wavelength, but the disadvantage is that they cannot be directly applied to circuits working at high and/or low frequencies. In this article, we will consider the bond graph approach as a tool for analyzing and understanding the behavior of microwave circuits, and to show how basic circuit and network concepts can be extended to handle many microwaves analysis and design problems of practical interest. This behavior revealed in the scattering matrix filter, and which will be operated from its reduced bond graph model. So, we propose in this paper, a new application of bond graph approach jointly with the scattering bond graph for a high frequency study.

• 대한전자공학회논문지
• /
• 제23권4호
• /
• pp.515-521
• /
• 1986

Performances of a piezoelectric ultrasonic transducer are analyzed considering the internal losses of a piezoleelctric material and fabricated layers. The KLM-model is adopted for the equivalent circuit of a piezoelectric resonator, and the attenuation coefficient is introduced to represent the internal losses of the transducer. The attenuation coefficient of a piezoelectric resonator is inversely proportional to the maximum value of the input electrical resistance, and is confirmed to be an efficient parameter for the analysis of the considerable lossy piezo-electric resonator operating in a thickness mode. Also, the experimentla RTII is obtained by pulse-echo method. The experimental result is deviated from the predicted one within 3 dB over the 20dB frequency bandwidth.

• 대한전자공학회논문지SD
• /
• 제40권12호
• /
• pp.10-16
• /
• 2003

에어브리지의 기생 커패시턴스의 영향을 분석하기 위해 CPW PHEMT의 기존 cold-FET 회로모델에 게이트-에어브리지의 기생 커패시턴스(C/sub ag/)차 드레인-에어브리지의 기생 커패시턴스(C/sub ad/)를 더해주었다. 또한 제안된 모델을 사용하여 소자의 parameter들을 추출하여, 그 존재를 확인하였다. 본 논문에서는 에어브리지에 의해 생성되는 기생 커패시턴스의 영향을 연구하기 위해 에어브리지의 여러 연결방법을 CPW PHEMT 제작에 접목시켰다. 또한 핀치오프상태의 cold-FET에 대한 개선된 등가회로 모델을 제시하여 에어브리지에 의한 기생 커패시턴스가 소자 특성에 어떤 영향을 주는 가를 분석하였다. 제작된 CPW PHEMT의 측정 결과로부터, 기생 커패시턴스 C/sub ag/와 C/sub ad/가 소자의 S/sub 21/ 이득을 감소시키는 중요한 요소임을 확인하였다.