• 한국가금학회지
• /
• 제46권4호
• /
• pp.223-234
• /
• 2019

This study investigated the effects of thawing methods and storage time on the quality of frozen duck meat. Meat was obtained from eight-week-old Korean native ducks (average weight=2.8 kg). Seventy-two samples were divided into eight treatments (three replicates/treatment, three samples/replicate) with 2 × 4 factorial arrangement based on two thawing methods (under running water at 12℃ for 3 h and in a refrigerator at 5℃ for 24 h) and four storage times (1, 3, 6, and 12 months). CIE b^* was significantly different among different storage time treatments, reaching its lowest after 6 months (P<0.05). Cooking loss did not differ between storage times; however, it was significantly lower following application of the fast thawing treatment (P<0.05). Water-holding capacity of meat stored for one month was highest compared to that of meat stored for a longer period (P<0.05). Additionally, there were significant differences based on storage time in γ-linoleic acid (C18:3n6) and eicosenoic acid (C20:1n9) contents (P<0.01), as well as in protein contents (P<0.05). Palmitoleic acid (C16:1n7) typically decreased after three months of storage; however, this decline was not significant compared to other storage times. Essential amino acids contents, except methionine, were significantly difference at six and 12 months of storage (P<0.05). Similarly, non-essential amino acid contents, except tyrosine, were significantly different among storage periods (P<0.05, P<0.01). Alternatively, there were no significant differences in the chemical composition, fatty acid content, or amino acid content based on the thawing method.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.91-98
• /
• 2006

The purpose of this study is to investigate the opacity and printing strength of MG paper overlaid plywood. The printing strength of ink on MG paper can be evaluated effectively by a formula $E^{*2}=[(L^{*})^{2}+(a^{*})^{2}+(b^{*})^{2}]^{1/2}$ that we proposed. Higher E value indicates good printing strength of ink-on-paper. We also assess the real color of translucent printed MG paper with a formula CIE ${\bigtriangleup}E^{*}$ (color difference between a pile of same paper to be opaque and fancy paper laminated board). In addition, the color difference on paper surface caused by the color of wood-based board (bottom) can be evaluated by a formula of Pc. No. Generally, an acceptable appearance quality of fancy boards is ${\bigtriangleup}E^{*}$ <2.0 and small Pc.No. value. The experimental results showed that Japan-made MG papers -J1, J2 and J3 have better printing strength and gloss than that of Taiwan-made paper (T1). The reason for this was that Taiwan-made paper has poor printing strength and low gloss, which might be correlated to the fiber compositions in paper. Higher printing strength can be seen for short fiber containing handsheets when comparing to that of handsheets. Nonetheless, low-freeness sheets gives better printing strength than that of high-freeness sheets. High-opacity MG paper gives good opacifying effect to the fancy paper laminated wood-based boards. Comparing the surface color of 2 kinds of fancy paper laminated boards, paperboard T1 laminated with high-opacity fancy paper showed slight color difference. The same results can be seen for $??g/m^{2}$ handsheets. Higher-opacity Acacia and Eucalyptus bleached sulfate pulps (short fiber) gives higher opacifying effect on the plywood when comparing to Northan pine and Radiata pine sulfate pulps(long fiber). The former ones also showed small color differences when comparing the color differences between the color of fancy paper and laminated paper board. Additionally, the color of bottom plywood can't be shown through for the high-opacify surface paper adhered to. Besides, the PC No of the base paper laminated board is small as well. Apparently, we can add colorants to the binders for the manufscture of various handsheets ($30g/m^{2}$) with various pulp mix ratios to increase the opacity of paperboards to certain extents. When we using yellow and brown binders in paper laminated board, the color difference between Acacia and Eucalyptus handsheets overlaid boards decreasing to 2.0 (acceptable ${\bigtriangleup}E^{*}$ <2.0, hard to discern), but not much improvement for Northern and Radiata pines. Definitely, show-through defects can be discernible for lower opacity papers. In general, admirable printing strength of fancy paper by which glued to plywood can be made with high-opacity paper and colored binders techniques.

• 한국축산식품학회지
• /
• 제25권4호
• /
• pp.409-414
• /
• 2005

The effects of slaughter weight on blood profile and pork qualities of japan berkshires were investigated A total 72 pigs were divided into 3 groups$(125\~130,\;105\~110\;or\;95\~104\;kg)$. At each slaughter weight pigs were conventionally slaughtered and then chilled overnight The carcass characteristics (carcass weight backfat thickness and grades) were determined on those carcass, the muscle longissimus dorsi was removed from each left side at 5th to 13th rib and meat qualities were evaluated. Blood profile including cortisol, creatine phos-phokinase (CPK), lactate dehydrogenase (LDH), glucose and phosphorus was not significantly (p>0.05) different among all slaughter weight, However, the calcium contents of pigs at $95\~104\;kg$ were significantly (p<0.05) higher than the other weights. The carcass weight and backfat thickness of pigs slaughtered at $125\~130\;kg$ were higher than those of $105\~110\;or\;95\~104\;kg$. The carcass grade of pigs slaughtered at $125\~130\;kg$ were significantly (p<0.05) lower than the other weight. The moisture contents of pigs slaughtered at $125\~130\;kg$ were significantly lower than the other weights, but crude protein contents were significantly (p<0.05) higher, Cooking loss and shear lone values of pigs slaughtered at $95\~104\;kg$ were significantly (p<0.05) lower than the other weight. CIE $a^*\;and\;b^*$ values of pigs slaughtered at $105\~110\;kg$ were significantly higher than the other weights. These results imply that the carcass characteristics (carcass weight and backfat thickness) could be affected by slaughter weight the cooking loss and shear force values of pigs slaughtered at $125\~130\;kg$ resulted in higher than those of $105\~110kg\;or\;95\~104\;kg$.

• 한국축산식품학회지
• /
• 제31권6호
• /
• pp.807-816
• /
• 2011

The present study evaluated the difference in objective and subjective meat quality properties among the pure-breed boars of Duroc, Berkshire and Yorkshire. Ten longissimus lumborum (LD) muscles were collected from each breed after 24 h slaughtering. The breed type showed a significant effect on intramuscular fat content, moisture (p<0.01), pH, sarcoplasmic protein solubility and color (p<0.05), whereas cooking loss and Warner Blazer shear force (WBsf) did not differ among the breeds. The Yorkshire breed showed significant (p<0.05) lower sarcoplasmic protein solubility, pH and CIE $a^*$ value when compared with other breeds. The sensory panels identified Duroc as having greater overall acceptability and higher rating values than other breeds. The oleic acid content was significantly lower in the Berkshire (29.85 %) than in the Duroc (40.19 %) and Yorkshire breeds (38.18 %, p<0.05). The Yorkshire breed showed the most desirable ratio of polyunsaturated and saturated fatty acids (0.31) than the Berkshire (0.16) and Duroc breeds (0.15, p<0.05). 40 volatile compounds have been identified and quantified, while aldehydes were the most abundant among flavor substances. Aldehydes were negatively correlated with oleic acid content (p<0.05). Current data indicated that each breed had their own merits and deficiencies in terms of meat qualityThe Yorkshire breed showed a greater number of weak points. Furthermore, this study indicated that individual fat-driven flavor components were greatly influenced by fatty acid composition. The polyunsaturated fatty acids did not show any negative effects on meat flavor if cooked meats were consumed soon after cooking.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권3호
• /
• pp.398-405
• /
• 2014

This study was conducted to compare growth performance, carcass characteristics and meat quality of 4 breeds of local chicken. A total of 480 1-d-old chicks were distributed to 16 pens, with 4 treatments of breed, 4 replicates and 30 chicks per pen. Three Korean local breeds of white-mini broiler, Hanhyup-3-ho, and Woorimatdag, and a breed of silky fowl were raised under identical rearing and feeding conditions for 31-d, 37-d, 36-d, and 59-d, respectively. The BW and feed consumption on a pen basis were weekly measured for all pens, and ADFI, ADG and gain:feed were calculated for each pen. The ADFI and ADG of 3 breeds of Korean local chicken were greater than those of silky fowl (p<0.05). Within the Korean local breeds, ADFI of white-mini broiler was the highest (p<0.05), and ADG of Hanhyup-3-ho and white-mini broiler was the highest (p<0.05). Gain:feed of silky fowl was less than that of the 3 breeds of Korean local chicken. The carcass and breast yield of white-mini broiler were the greater than those of other breeds (p<0.05). The breast meat color (CIE $L^*$, $a^*$, and $b^*$) of 3 breeds of Korean local chicken were higher than that of silky fowl (p<0.05). The breast meat of Hanhyup-3-ho had greater cooking loss (p<0.05), whereas water holding capacity and pH were less than those of other breeds (p<0.05). The color score of 3 breeds of Korean local chicken was higher than that of silky fowl (p<0.05). Woorimatdag had a higher score on tenderness (p<0.05), whereas flavor score was less than that of other breeds (p<0.05). In conclusion, 4 local breeds of chicken have some unique features and seem to have more advantages, and this information can help consumers who prefer healthy and premium chicken meat.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권3호
• /
• pp.424-431
• /
• 2007

The aim of this study was to determine the effects of short road transportation in an open truck during hot season on live weight shrink, physiological responses, and carcass and meat quality of Omani sheep at 6 and 12 months of age. Thirty-six male sheep, 18 of each age group, were used. Age groups were assigned randomly to transported and not-transported groups. The transported group was transported to the slaughterhouse the day of slaughter in an open truck covering a distance of approximately 100 km. The average temperature during transportation was $37^{\circ}C$. The not-transported group was kept in a lairage of a commercial slaughterhouse with ad libitum feed and water for 48 h prior to slaughter. Blood samples were collected from sheep before loading and prior to slaughter via jugular venipuncture to assess their physiological response to transport in relation to hormonal levels. Animals were weighed just before loading onto a truck and after transport to assess shrinkage. Muscle ultimate pH, expressed juice, cooking loss percentage, WB-shear force value, sarcomere length and colour L*, a*, b* were measured on samples from longissimus dorsi, biceps femoris and semitendinosus muscles collected at 24 h postmortem at $1-3^{\circ}C$. Live weight shrinkage losses were 1.09 and 1.52 kg for 6 and 12 month transported sheep, respectively. The transported sheep had significantly (p<0.05) higher cortisol, adrenaline, noradrenaline, and dopamine concentration levels prior to slaughter at both ages than the not-transported sheep. Transportation significantly influenced meat quality characteristics of three muscles. Muscle ultimate pH and shear force values were significantly higher, while CIE L*, a*, b*, expressed juice and cooking loss were lower in transported than not-transported sheep. Age had a significant effect on meat quality characteristics of Omani sheep. These results indicated that short-term pre-slaughter transport at high ambient temperatures can cause noticeable changes in physiological and muscle metabolism responses in sheep.

• 한국재료학회지
• /
• 제25권2호
• /
• pp.61-67
• /
• 2015

$Fe_2O_3$ coated plate mica($Fe_2O_3$/mica) for infrared reflectance red pigment was prepared under hydrothermal treatment. $Fe_2O_3$ was perfectly coated on mica via the difference of surface charge between $Fe_2O_3$ and mica particles at pH 3. $Fe_2O_3$/mica was then calcined at $800^{\circ}C$ to stabilize the coated layer on mica. The infrared(IR) reflectance pigments were characterized by X-ray diffraction, FE-SEM, zeta potential, and a UV-Vis-NIR spectrophotometer. In particular, the CIE color coordinate and IR reflectance properties of $Fe_2O_3$/mica pigments were investigated in relation to the thickness variation of the $Fe_2O_3$ layer coated on mica of various lateral sizes. The isolation-heat red paints containing the pigments were prepared and optimized with a thinner, settling agent, and dispersant. Then, the films were made. The thermal property of isolation-heat on these films was observed through the relationship of the IR reflectance value, which was based on the variation of the $Fe_2O_3$ layer's thickness coated on mica and mica's lateral size as IR reflectance pigment. With an increase in IR reflectance on these films, the thermal property of isolation-heat was effectively enhanced.

• 한국축산식품학회지
• /
• 제32권6호
• /
• pp.749-755
• /
• 2012

This study was performed to investigate the physico-chemical properties of Holstein steer beef loin (M. longissimus dorsi) and top round (M. semimembranosus) from 18, 21 and 24-mon old. The loin and top round muscles from the 24-mon group had higher intramuscular fat content (%) than the other groups (p<0.05); however, the protein content was not significantly different among the 3 groups (p>0.05). With regard to meat color (CIE), the lightness ($L^*$), redness ($a^*$) and yellowness ($b^*$) values of the loin were significantly higher for the 21- and 24-mon groups, and those of the top round were significantly higher for the 21-mon group than the same cuts in the other groups. The Warner-Bratzler shear force was the lowest at 24 mon for both the loin and top round muscles (3.69 kg); however, the water holding capacity was significantly higher for loin muscles from the 21-mon group (54.53%, p<0.05). The loin muscles from the 24-mon group contained significantly higher levels of monounsaturated fatty acid and significantly lower levels of saturated fatty acid than those in the other groups (p<0.05). The tenderness, juiciness, flavor-likeness and the overall-likeness scores were significantly higher for beef from the 21- and 24-mon groups than that from the 18-mon group. The results of this study indicate that both the slaughtering age and muscle type significantly affect meat quality. Therefore, fattening the beef for more than 4 mon during the late fattening stage would be advantageous for the meat quality of Holstein steers.

• 한국축산식품학회지
• /
• 제29권2호
• /
• pp.188-193
• /
• 2009

본 연구에서는 인진쑥의 건조 분말을 육성기 암퇘지 $(LY{\times}D)$에 평균체중이 75kg일 때부터 출하시까지 50일간 처리하였을 때 식육의 도체 및 식육의 품질특성에 미치는 영향을 조사하기 위해 실시하였다. 일반사료에 인진쑥 분말을 급여사료 기준으로 C(0%), T1(0.5%), T2(1.0%), T3(1.5%)처리하였다. 도체특성에 영향을 미치지 않았으며, 1% 이상의 인진쑥 급여육의 보수력 및 가열감량에 유의적인 차이가 나타나지 않았다. 하지만, 인진쑥 T1 및 T3의 최종 pH가 유의적으로 감소하였고, 신선육 전단력가는 T3가 유의적으로 높은 값을 나타내었다. 반면, 가열육 전단가의 경우 T2 및 T3가 유의적으로 낮게 나타났다. T2의$CIEL^Y*,\;a^*,\;b^*$, chroma가 유의적으로 낮았고, hue는 유의적으로 높았다. 지방색의 경우 T2의 L이 유의적으로 낮았고, T3의 $CIE\;a^*,\;b^*$가 유의적으로 낮았다. 조직감의 경우, T3의 경도(hardness)와 표면경도(brittleness), 검성(gumminesss), 씹힘성(chewiness), 부착성(adhesiveness)이 시험구 중 유의적으로 높은 값을 나타내었다(p<0.05). 이상의 결과 인진쑥의 급여가 도체특성, 보수력 및 가열감량 향상에 영향을 미치지 못하였지만, T3의 가열육의 전단가 향상에 기여하였다.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.500-507
• /
• 2008

파우더류 화장품의 제조 시 사용되어지는 분쇄기 중 스크린밀, 핀밀, 제트밀을 이용하여, 대표적인 화장품용 안료(탈크, 마이카, 나이론파우더, 실리카, 이산화티탄)를 분쇄하여 각 안료들의 분쇄 특징과 분쇄기의 특성에 대한 연구를 수행하였다. 또한 분쇄평가를 위해 산화철을 흔적물질로써 사용하여 실험하여 CIE LAB의 변화로써 평가하였다. 스크린밀과 핀밀의 분쇄는 박편상 분체에서는 종횡단면의 분쇄 중 종단분쇄가 더 많이 발생하고 제트밀에서는 종횡 단면의 분쇄가 모두 발생하는 것으로 사료되고 구상파우더인 나이론파우더와 실리카의 경우, 1차 입자화 혹은, 역으로 정전기적 인력에 의한 약한 응집이 나타나지만, 제트밀에서는 분쇄압력 2bar의 조건 이상에서는 나이론파우더의 합일 혹은 변형이 발생하고, 실리카는 심한 파쇄가 발생하였고, 이산화티탄은 모든 분쇄기에서 1차입자화가 되었다. 분쇄에 따른 산화철의 색상변화는 핀밀이 가장 우수한 결과를 보였다. 이들 결과로부터 실질적인 제품 제조 공정에서는 박편상 및 침상 원료의 사전처리 이용에는 제트밀을 이용하고, 색상 발현을 위한 분쇄, 즉 조색은 스크린밀과 핀밀을 이용하는 것이 좋을 것으로 판단된다. 또한 산업적인 공정조건을 고려하면, 스크린밀은 4회 분쇄 시, 핀밀은 2회 분쇄 시, 제트밀은 1bar의 분쇄압력 조건 하에서 전반적인 분쇄효율이 우수한 것으로 사료된다.