• 제목/요약/키워드: Cie

검색결과 956건 처리시간 0.023초

탄탈륨 질화물(Ta3N5)의 적색도 향상에 미치는 NH4Cl의 영향 (Effect of By-product (NH4Cl) on the Improvement of the Red Color Tone of Tantalum Nitride (Ta3N5))

  • 박은영;피재환;김유진;조우석
    • 한국세라믹학회지
    • /
    • 제46권6호
    • /
    • pp.583-586
    • /
    • 2009
  • The Tantalum nitride has attracted wide at attention as issues related to the toxicity of Cd-related materials. But in the titration process of Ta$Cl_5$ solution with $NH_4$OH, $NH_4$Cl, as a by product, was remained in the prepared Tantalum precursor. The tantalum precursor with $NH_4$Cl was nitrided by ammonolysis. The red color tone of $Ta_3N_5$ was reduced by the residual $NH_4$Cl reduce. Therefore, amorphous Tantalum precursor was prepared by filtering process with as hydrous ethanol to remove the $NH_4$Cl. In the case of using Tantalum precursor without $NH_4$Cl, we successfully synthesized the Tantalum nitride with good red color. The value of red color tone was improved from $a^*$=36.8 to $a^*$=53.0. The synthesized powder was characterized by XRD, SEM, the Nitrogen / Oxygen Determinator, TG-DTA, and the CIE $L^*a^*b^*$ colorimeter.

SnO2-TiO2-V2O5계의 노랑안료 합성 (Synthesis of SnO2-TiO2-V2O5 System Yellow Pigment)

  • 주인돈;황동하;이현수;박주석;이병하
    • 한국세라믹학회지
    • /
    • 제46권6호
    • /
    • pp.639-642
    • /
    • 2009
  • The research was performed to find out the optimum firing condition for the $SnO_2-TiO_2-V_2O_5$ system yellow pigment. The pigment based on $SnO_2-V_2O_5$ system showed very intense yellow color and it was used widely in ceramics industry. Synthesized pigment, with partial substitutions of $SnO_2\;by\;TiO_2$, was fired at $1300{^{\circ}C}$ soaking 1h and it showed bright yellow color. $SnO_2-TiO_2-V_2O_5$ system was very more intensive changes in yellow color by colorimetric value $b^*$ than $SnO_2-V_2O_5$ system. Synthesized yellow pigments were characterized by X-ray diffraction (XRD), FT-IR, and UV-vis spectroscopy. The best composition for yellow pigment was 93:7:0.5(mole%) for $SnO_2-V_2O_5-TiO_2$. The measurement of CIE $L^*a^*b^*$ of pigment was $L^*(78.82),\;a^*(-4.88)\;and\;b^*$(59.25).

제강분진을 활용한 고온발색 청색무기안료 합성 및 특성에 관한 연구 (Synthesis and Characteristics of Blue Ceramic Pigments Using Electric Arc Furnace Dust)

  • 손보람;김진호;한규성;조우석;황광택
    • 한국세라믹학회지
    • /
    • 제51권3호
    • /
    • pp.184-189
    • /
    • 2014
  • Electric arc furnace dust (EAFD) is a solid waste generated by the steel-scrap recycling process. It mainly consists of zinc oxides (ZnO), alumina ($Al_2O_3$), iron oxides ($Fe_2O_3$), and silica ($SiO_2$). Here we report the preparation and characterization of blue ceramic pigments using EAFD powder as a starting material. $(Zn(EAFD),Co)Al_2O_4$ blue ceramic pigment was prepared by the solid-state reaction method. The color characteristics of the pigment obtained were compared with those of pure $CoAl_2O_4$. The new pigment was characterized using XRD, CIE-$L^*a^*b^*$ color-measurements, SEM, and EDX. The XRD analysis revealed that the $(Zn(EAFD),Co)Al_2O_4$ pigment was composed of mainly the spinel phase of $(Zn,Co)Al_2O_4$. The $Zn(EAFD)_{0.25}Co_{0.75}Al_2O_4$ pigments showed a vivid blue color with a $b^*$ value of -28.64 and a good glaze stability with a transparent glaze.

고추씨 분말을 첨가한 닭다리살 재구성 육포 개발 (Development of Restructured Chicken Thigh Jerky Added with Red Pepper Seed Powder)

  • 이정아;김학연
    • 한국식품영양과학회지
    • /
    • 제45권9호
    • /
    • pp.1333-1337
    • /
    • 2016
  • 본 연구는 고추씨 분말이 닭다리살 재구성 육포의 이화학적 및 관능적 특성에 미치는 영향을 규명하고자 조사하였다. 고추씨 분말의 함량을 각각 0%(control), 1%, 2%, 3%를 첨가하여 닭다리살 재구성 육포를 제조하였으며, 실험 결과는 다음과 같다. 고추씨 분말을 첨가한 닭다리살 재구성 육포의 수분 함량이 대조구보다 유의적으로 높게 나타났으며 (P<0.05), 단백질 함량은 고추씨 분말을 첨가할수록 줄어드는 경향을 나타내었다. 가열 전후 pH는 고추씨 분말 첨가량이 증가할수록 감소하는 경향을 보였다. 가열 전후 명도, 적색도와 황색도는 고추씨 분말이 증가함에 따라 증가하는 경향을 보였다. 보수력, 건조수율은 고추씨 분말을 첨가할수록 증가하는 경향을 보였으나, 전단력은 고추씨 분말을 첨가할수록 감소하는 경향을 보였다. 관능평가에서 고추씨 분말을 3% 첨가한 닭다리살 재구성 육포의 색도, 풍미, 연도, 다즙성과 전체적인 기호도가 가장 우수한 평가를 받았다. 이상의 연구 결과를 종합하면 3% 고추씨 분말을 첨가한 닭다리살 재구성 육포가 조직감과 관능적 특성을 증진시킨다고 판단된다.

Effects of Dietary Metabolizable Energy and Lysine on CarcassCharacteristics and Meat Quality in Arbor Acres Broilers

  • Tang, M.Y.;Ma, Q.G.;Chen, X.D.;Ji, C.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제20권12호
    • /
    • pp.1865-1873
    • /
    • 2007
  • An experiment was performed to evaluate the effects of dietary metabolizable energy (ME) and lysine on carcass characteristics and meat quality in Arbor Acres (AA) broilers from 1 to 56 days of age. A total of 2,970 1-d-old male broiler chicks were randomly allocated to nine dietary treatments (three ME levels in combination with three lysine levels), and dietary ME and lysine concentrations were formulated by varying corn, soybean meal, tallow, and L-lysine sulfate concentrations. Live body weight (BW), carcass weight (CW), dressing percent, breast muscle weight (BMW), yield of breast muscle, muscle color (CIE L*, a*, and b*), pH values 45 min and 24 h postmortem ($pH_{45}$, and $pH_{24}$), meat shear force value (SFV), and water loss rate (WLR) were evaluated. Results showed that live body weight and dressing percent increased (p<0.05) as dietary energy increased. Higher dietary lysine content improved breast muscle weight. Neither carcass weight nor yield of breast muscle was affected by dietary energy or lysine content. Higher ME increased the b* value (p = 0.067) and $pH_{24}$ value (p<0.05), whereas it decreased SFV (p<0.05) and WLR (p = 0.06). Only water loss rate was influenced (p<0.01) by dietary lysine, which was higher in broilers from the high lysine diet as compared to those from medium or low lysine diets. The $pH_{45}$ value and L* value of breast muscle were not affected by ME or lysine. Significant interaction of dietary ME and lysine was found on a* value of breast muscle. These results indicated that dietary ME and lysine had important effects on breast muscle growth and meat quality, however their effects were different. Different concentrations of dietary ME and lysine might be considered to improve meat quality.

돈피 젤라틴 분말을 첨가한 떡갈비 개발 (Development of Tteokgalbi Added with Pig Skin Gelatine Powder)

  • 정한결;김학연
    • 한국식품영양과학회지
    • /
    • 제45권8호
    • /
    • pp.1147-1152
    • /
    • 2016
  • 본 연구는 돈피 젤라틴 분말의 첨가 수준이 떡갈비의 품질특성에 미치는 영향을 규명하고자 실시하였다. 떡갈비의 단백질 함량은 대조구가 가장 낮은 수치를 나타내었으며 돈피젤라틴 분말 4% 처리구가 가장 높은 수치를 나타내었다(P<0.05). 수분 함량은 돈피 젤라틴 분말을 첨가할수록 점차 높아지는 경향을 보였으나, 지방 함량은 돈피 젤라틴 분말 첨가량이 증가함에 따라 점차 감소하는 경향을 나타내었다. 가열 전과 후 명도와 적색도는 돈피 젤라틴 분말 첨가량이 증가함에 따라 유의적으로 감소하였으며, 황색도는 증가하였다(P<0.05). 가열감량, 직경감소율과 두께감소율은 돈피 젤라틴 분말 첨가량이 증가할수록 감소하였으며, 경도는 돈피 젤라틴 분말을 첨가할수록 높은 수치를 나타내었고 3% 처리구와 4% 처리구가 가장 높은 수치를 나타내었다. 검성과 씹음성은 돈피 젤라틴 분말의 첨가량이 증가함에 따라 높은 수치를 나타내었다. 관능적 특성은 모든 돈피 젤라틴 분말을 첨가할수록 색도와 다즙성에서 대조구보다 우수한 평가를 받았으며, 이외 모든 관능평가 항목에서 3% 처리구가 유의적으로 가장 우수한 평가를 받는 것으로 나타났다(P<0.05). 이러한 연구 결과를 바탕으로 돈육 떡갈비에 돈피 젤라틴 분말을 첨가하여 품질 특성을 분석한 결과 2~3%의 돈피 젤라틴 분말을 첨가하여 우수한 떡갈비를 제조할 수 있을 것으로 판단된다.

신경망을 이용한 칼라 입력장치의 칼라 보정 (Color correction of tile color input device using the Neural Network)

  • 엄경배;안창선
    • 정보교육학회논문지
    • /
    • 제3권1호
    • /
    • pp.134-142
    • /
    • 1999
  • 칼라 입출력 장비의 가격이 점차로 저렴해짐에 따라 영상으로부터 물체의 형상뿐만아니라 칼라까지도 인식하여 보다 정밀한 정보를 이용하고자하는 요구가 증대되고 있다. 이를 위해서는 칼라 입출력 시스템의 정확한 칼라 표현 및 재현을 위해 칼라 보정에 관한 연구가 선행되어져야한다. 따라서, 본 논문에서는 칼라 입출력장비 중 칼라 스캐너의 칼라 보정에 관하여 연구하였다. 칼라 스캐너의 특성은 gray-balancing과 칼라 변환의 두과정을 나뉜다. 칼라 변환으로부터 gray-balancing을 분리함으로써 칼라 변환을 위해 유도되어진 변환 행렬은 모든 형태의 스캐너에 적용될 수 있어 스캐너 특성의 portability를 가능하게 한다. 또한, gray-balance된 RGB값을 얻기위한 선의 적합을 위해 최소자승법을 이용하였고, 칼라 변환을 위해 gray-balance된 RGB로부터 CIE-XYZ로 비선형적 좌표 변환 문제를 저장공간이 많이 필요하지 않고, 빠른 변환결과를 제공할 수 있는 장점이 있는 신경망 기법을 이용하여 해결 하였다. 삼차원 3자극치 공간에서 신경망 출력은 원하는 출력의 근사치를 제공하는 것을 알 수 있었다. 제안된 칼라 보정 방법은 모듈별로 분해되었기 때문에 스캐너 특성의 portability를 가능하게 하여 모든 형태의 스캐너 보정에 이용될 수 있으리라 기대된다.

  • PDF

Pd-Ag 및 Ni-Cr 합금의 금 전착이 전장 레진의 색채에 미치는 영향 (EFFECT OF GOLD ELECTRODEPOSIT OF PD-AG, NI-CR ALLOYS ON THE COLOR OF VENERRED RESIN)

  • 양홍서;박영준
    • 대한치과보철학회지
    • /
    • 제33권4호
    • /
    • pp.645-661
    • /
    • 1995
  • As the mechanical property of composite resin improved, composite resin has been widely used esthetic dentistry. In the field of esthetic dentistry, the color of prosthetic material is very important. The purpose of this study was to evaluate the color difference of specimens, by the types of alloys and gold electrodeposit. Experimental groups were as follows : Group Prec : Au-Pt alloy with no gold coating and no resin veneer. Group Semi : Pd-Ag alloy with no gold coating and no resin veneer. Group BAse : Ni-Cr alloy with no gold coating and no resin veneer. Group Gsem : Pd-Ag alloy with no gold coating and no resin veneer. Group Gbas : Ni-Cr alloy with no gold coating and no resin veneer. Group PreR : Resin veneer on the Pd-Ag alloy without gold coating. Group SemR : Resin veneer on the Pd-Ag alloy without gold coating. Group GbsR : Resin veneer on the Ni-Cr alloy with gold coating Group BasR : Resin veneer on the Ni-Cr alloy without gold coating. In this study, colors of metal surfaces and veneered resins were evaluated by the CIE $L^{*}a^{*}b$ system. The results obtained were as follows : 1. different alloy types and gold coating make the $L^{*}a^{*}b$ system. 2. The ${\Delta}E^*$ab value between groups semi and Base was less than 1.5 and there was no $a^*$ and $b^*$ value difference between groups Gsem and Gbas 3. The values of $L^*$ and $a^*$ ain groups GsemR and GbasR were so similar that the ${\Delta}E^*$ab value was as small as 0.58. 4. In resin specimens with gold coated semiprecious or base alloys showed yellower and redder deviation than the resin specimens with precious alloy. 5. The ${\Delta}E^*$ab values between goups PreR-GsemR and groups PreR-GbasR were as small as 2.68 and 2.22 respectively.

  • PDF

The Characteristics and Change of Colors on Fashion Collections in 1990s

  • Kim, Honey;Kim, Young-In
    • International Journal of Costume and Fashion
    • /
    • 제7권2호
    • /
    • pp.18-31
    • /
    • 2007
  • The purpose of this study is to examine color characteristics and color changes of the fashion collections through 1990s, and to provide the efficient color information for color planning upon fashion themes. For this research, a total of 30,084 colors were collected from Paris, Milan, London, New York Collections in 1990s. Those colors were first measured by the Pantone Textile Color Specifier and COS Color System and spectrophotometer(color eye 580). These measured color values $L^{\ast}a^{\ast}b^{\ast}$of CIE were converted into H V/C of Munsell System, and 12 tones of PCCS with 5 achromatic colors. The characteristics of collected colors were analyzed in general and by place, season and year. The results of the study are as follows : First, the hues of purple blue, yellow red, red, yellow and the tones of grayish, pale, white, black, dark grayish, dull, light grayish appeared mostly. Yellow was shown quite frequently in spring/summer while purple, purple blue, red and yellow red in fall/winter. White, pale, light, light grayish and light gray were shown more frequently in spring/summer while Black, dark grayish, grayish, dark gray and dark in fall/winter. Second, the characteristics of colors by 4 representative places were similar to the general characteristics of colors in 1990's. Third, There were distributed widely Red, Yellow Red, Yellow in the early 1990s, Green Yellow, Green, Blue Green in the mid of 1990s, and Purple Blue, Purple in the late of 1990s. The distribution range of chromatic colors showed wide in both of the early of 1990s and the mid of 1990s for a while, and achromatic colors of grayish, gray and black appeared mostly in the late of 1900s.

Fabrication of GaN Micro-pyramid Structure Arrays for Phosphor-free white Lighting-emitting Diode

  • Sim, Young-Chul;Ko, Young-Ho;Lim, Seung-Hyuk;Cho, Yong-Hoon
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.299-299
    • /
    • 2014
  • 기존의 고출력 광원들이 환경문제 등으로 외국에서 규제대상으로 지정되고 있는 가운데고체 상태의 광원인 Light-emitting diode (LED)는 기존의 광원에 비해 에너지 절감효과 크기 때문에 인해 널리 사용되고 있는 추세이다. 대부분의 백색 LED의 경우 청색 LED에 황색 형광체를 사용하는 것이 일반적이다. 그러나 이의 경우 빛의 흡수와 재방출 과정에서 생기는 에너지 변환손실의 문제가 불가피하다. 또한, 두 종류의 색을 섞어서 나타나는 낮은 연색성의 문제가 있고 사용할 수 있는 형광체의 종류와 조합도 일본 등 해외에 출원된 특허권으로 연구개발에 어려움이 있다. 이를 해결하기 위해 본 연구에서는 형광체를 사용하지 않는 단일 백색 LED를 개발을 위하여 극성과 반극성을 조합한 구조를 연구하였다. Photo-lithography를 이용하여 다양한 크기와 구조의 홀 패턴을 얻을 수 있었으며, metal organic chemical vapor deposition을 이용하여 다양한 형태의 피라미드 구조를 성장할 수 있었다. 패턴의 홀 크기와 홀 사이의 간격을 조절하면서 성장을 진행 하였고, 그 결과 pyramid와 truncated pyramid 모양의 GaN 구조를 성장할 수 있었다. [그림 1] Pyramid 구조의 반극성 면과 truncated pyramid 구조의 극성 면사이의 성장속도 차이 때문에 양자우물의 두께가 달라짐을 확인하였다. 이로 인해 양자구속효과가 달라져 다른 파장의 발광을 기대할 수 있었다. 뿐만 아니라 In의 확산거리가 Ga보다 길어서 홀사이 간격을 달리하면 In조성비가 달라지는 효과가 있음을 확인하였고 다양한 홀 사이 간격으로부터 각기 다른 파장의 발광을 얻을 수 있었다. 파장을 조금 더 상세하게 분석하기 위하여 Photoluminescence과 Cathodoluminescence을 사용하였다. 이로써 여러 파장을 발광하는 패턴을 섞어 넓은 영역의 발광 스펙트럼을 만들었다. 특히 패턴을 섞는 방법도 홀과 에피 구조를 섞는 방법, 크기가 다른 홀 패턴을 배열하는 방법등 다양히 하며 가장 좋을 패턴을 연구하였다. 그리하여 최적의 패턴과 구조, 성장조건을 찾아 백색의 CIE 좌표값을 얻을 수 있었다.

  • PDF