• 한국전기전자재료학회논문지
• /
• 제18권7호
• /
• pp.641-646
• /
• 2005

To fabricate a single layer white organic light emitting diode (OLED), a novel non-conjugated blue emitting material PPPMA-co-DTPM copolymer was synthesized containing a perylene moiety unit with hole transporting and blue emitting ability and a triazine moiety unit with electron transporting ability. The devices were fabricated using PPPMA-co-DTPM $(PPPMA[70\;wt\%]:DTPM[30\;wt\%])$ copolymer by varying the doping concentrations of each red, green and blue fluorescent dye, by molecular-dispersing into Toluene solvent with spin coating method. In case of ITO/PPPMA-co-DTPM:TPB$(3\;mol\%):C6(0.04\;mol\%):NR(0.015\;mol\%)/Al$ structure, as they were molecular-dispersing into 30 mg/ml Toluene solvent, nearly-pure white light was obtained both (0.325, 0.339) in the CIE coordinates at 18 V and (0.335, 0.345) at 15 V. The turn-on voltage was 3 V, the light-emitting turn-on voltage was 4 V, and the maximum external quantum efficiency was $0.667\%$ at 24.5 V. Also, in case of using 40 mg/ml Toluene solvent, the CIE coordinate was (0.345, 0.342) at 20 V.

• 제어로봇시스템학회논문지
• /
• 제14권4호
• /
• pp.353-360
• /
• 2008

The LGP with nanometer structures resulted in enhancement of optical efficiency. Its fundamental mechanism is to recycle the polarized light via one round-trip through QWP(Quarter-Wave Plate) but the maximum efficiency to reach with this method is limited up to 2. To get the larger efficiency than this limited one a LGP with nanometer-patterned grating is suggested. For its optimum design the computer simulation is performed and suggests a grating that the spatial frequency between adjacent patterns is 500nm, its height 250nm, duty cycle 50%, and its cross section is rectangular. On the basis of simulation results the LGP with nanometer-patterned grating is fabricated and its optical properties such as angular intensity distribution and CIE color coordinates are characterized. The angles of transmitted light are nearly the same as the results expected from the generalized Snell's law. Thus the Mathematica code, developed in this experiment, will be applied to designing the optimized LGP. The LGP with nanometer-patterened grating shows the enhancement of transmitted intensity distribution up to 4.9 times.

• 한국축산식품학회지
• /
• 제31권5호
• /
• pp.641-648
• /
• 2011

This study investigated the effects of high pressure with or without thermal treatment on the cured color development and residual nitrite contents of model meat systems (pork, NaCl and sodium nitrite). At low nitrite levels (${\leq}50{\mu}g/g$), 200 MPa of pressure alone (P) did not develop the cured meat color (p>0.05). Thermal treatment (T) showed curing pigmentation (higher CIE L* and CIE a*), and the impacts were more effective when pressure was combined with thermal treatment (PT). In contrast, nitrite levels did not contribute to the cured meat color when ${\geq}200{\mu}g/g$ of nitrite was added to the meat. At high nitrite levels, although the typical cured color that is induced by thermal treatment did not present by pressure alone, the PT treatment still showed a pinker color with low residual nitrite content compared to the T treatment. The higher the pressure level (300 MPa), the greater the cured meat pigmentation with lower residual nitrite. Therefore, the present study demonstrates the possible application of high pressure, both for cured pigmentation and reducing residual nitrite, respective to typical thermal treatments.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.313-321
• /
• 2011

Purpose: The purpose of this study was to compare color parameters of different fabrication method of Lava ceram powder, Lava DVS blocks, IPS e.max ceram and IPS e.max zirpress. Methods: The three available shades(A1, A2, A3.5) of Lava & Kavo zirconia blocks were examined. For each of three colors, three different thickness were tested, 5 times of measurement frequency. The measurements were made using a spectrophotometer equipped with an integrating sphere using the CIE $L^*$, $a^*$, $b^*$ colorimetric system. Results: Lava build-up group and Lava DVS group showed clinically perceived color difference, on the other hand IPS e.max build-up group and IPS e.max zirpress group did not show clinically perceived color difference to shade allowed on core. When the thickness of porcelain veneer increased from Lava and IPS e.max groups, color differences(${\Delta}E$) were decreased. Conclusion: All-ceramic system has color characteristics that clinicians have to consider when selecting materials. Also, manufacturers of different porcelain systems must make every effort to achieve color reproducibility.

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.55-58
• /
• 2004

최근 LED 광원에 의한 컬러조명 연출사례는 급속하게 증가하고 있으나, LED에 의한 광색 선택과 관련된 연구는 거의 없는 실정이다. 본 연구는 3원색 LED를 사용한 광색 생성기를 제작하여 복수의 응답자로 하여금 스스로 조각하여 선호하는 컬러를 만들게 하고 이를 디지털 색채색차계로 측정하여 CIE1964색도도표에 기록하였다. 연구결과 일정한 광색 선호도 그룹이 형성되었으며, 이는 향후 LED를 사용하는 조명설계 뿐 만 아니라 디지털로 제어되는 컬러 조명연출 설계시 적용되어 활발하게 응용될 것으로 기대한다.

• 한국안광학회지
• /
• 제8권1호
• /
• pp.59-64
• /
• 2003

Photochoromic lens에 광을 조사하면 darkening 상태와 fading상태에서photo-transmittance는 감소한다. 광의 조사를 제거하면 fading 상태가 되어 photo-transmittance는 원래 상태로 회복하는 가역과정을 갖는다. 자체 제작한 Photochoromic lens에서 darkening과 fading 과정에서 Photochromism의 분광측색계를 이용하여 CIE $L^*a^*b^*$의 색 좌표을 얻는다. darkening과 fading상태에서 색 좌표($a^*-b^*$)는 일차 곡선이고 (-) 기울기를 이며, 선형적으로 변한다. 색 좌표 이동량은 Blue ${\rightarrow}$ Yellow, Red ${\rightarrow}$ Green형태이다. fading상태에서 색 좌표는 darkening 상태보다 $b^*$ 값이 낮고, Photochromism 좌표의 이동은 darkening 상태와 반대로 이동한다. Photochoromic lens에 대한 Photochoromism 평가 방법은 darkening과 fading에 대한 색 좌표 이동으로 이용 할 수 있다.

• 한국응용과학기술학회지
• /
• 제26권3호
• /
• pp.357-361
• /
• 2009

The authors have demonstrated white oraganic light-emitting diodes (WOLED) using 1,4-bis[2-(4'-diphenylaminobiphenyl-4-yl)vinyl]benzene as fluorescent blue emitter and iridium(III) bis(5-acetyl-2-phenylpyridinato-N,C2') acetylacetonate as phosphorescent red emitter. The optimized WOLED using red host material as bis(2-methyl-8-quinolinato) -4-phenylphenolate exhibited proper color stability in comparison with the control device using 4,4'-N,N'-dicarbazole-biphenyl as red host. The white device showed a maximum luminance of 21100 $cd/m^2$ at 14 V, luminous efficiency of 9.7 cd/A at 20 $mA/cm^2$, and Commission Internationale de I'Eclairage ($CIE_{x,y}$)coordinates of (0.32, 0.34) at 1000 $cd/m^2$. The devices also exhibited the color shift with ${\Delta}CIE_{x,y}$ coordinates of ${\pm}$ (0.01,0.01) from 100 to 20000 $cd/m^2$.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권2호
• /
• pp.279-282
• /
• 2002

Twenty six male Hanwoo (Korean cattle) carcasses were measured for pH, temperature and instrumental color changes of loins during 24 h post-mortem carcass chilling at $4^{\circ}C$ in the cooler. The average internal temperature of loins was about $5^{\circ}C$ after 24 h of chilling, and with the exclusion of those with an ultimate pH>6.0 (dark-cutters), the average pH value was 5.5. When all carcasses were considered for the partial correlation coefficient between color and pH, with the temperature effect excluded, CIE $L^*$, $a^*$ and $b^*$ seemed to be affected significantly by pH during chilling process (p<0.001). However, when carcasses with dark-cutting condition were excluded, the correlation coefficients were much lower. In contrast, when the partial correlation coefficients between color and temperature, excluding the effect of pH on them, were analyzed, the relationship between color and temperature did not change much after values of DFD (dark, firm, dry) beef were excluded. The results suggested that the known interrelationship of color and pH in chilled beef loins be mainly due to the influence of temperature on pH and color.

• Journal of Animal Science and Technology
• /
• 제55권6호
• /
• pp.551-557
• /
• 2013

This study was conducted to analyze the genotypes and genes of FABP3 (Fatty-acid Binding Protein 3) in pigs using MSPI restriction enzyme and electrophoresis. Analysis of data collected from a total of 210 crossbred pigs (LYD or YLD) in Chungcheongnam-do, Korea, revealed the following. The AA genotypes of FABP3 were detected in the 750 bp and 100 bp bands, while the Aa heterotype appeared in the 850, 750 and 100 bp bands and the aa recessive homotype was detected in a single band of 850 bp. The genotype frequency of AA, Aa and aa was 46.67%, 51.43% and 1.90%, respectively. The genetic equilibrium of this population showed a significant difference (p<0.001) based on a ${\chi}^2$-test. The carcass weight, backfat thickness, marbling score, pH, drip loss, cooking loss, and meat color based on the CIE $L^*$, and $b^*$ values according to genotypes of FABP3 did not differ significantly (p>0.05); however, the CIE $a^*$ values did (p<0.05).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.484-484
• /
• 2012

OLED는 유기재료를 사용하는 특수성 때문에 선명한 고품질의 화질을 얻을 수 있다. 유기재료에 따른 수명이 정해져 있지만 열에 약한 재료를 사용하기 때문에 출력되는 색의 변화를 동반할 만큼 불안정 하다. OLED는 RGB를 순서에 따라 유리 기판 상에 나열한 구조이며 각 화소의 양극과 음극은 가로와 세로로 서로 직교하고 있다. 이러한 OLED의 구조 때문에 직, 간접적으로 전이되는 열과 OLED Device에서 발생하는 자체 열로 인하여 유기소자의 특성이 변형되는, 이른바 열화현상에 쉽게 노출되어 있다. OLED Device를 제작한 후 72시간동안 8V의 전압을 인가하여 열화현상을 촉진시킨 Aging샘플을 확보 하였다. Aging된 Device의 인가전압을 3V ~ 6V까지 변화를 주고 측정해본 결과 각각의 모든 전압에서 Aging Device의 Nomalized Intensity가 상대적으로 20% 감소했음을 확인 하였다. 또한 Aging 된 Device는 As is Device에 비해 단파장 쪽으로 Shift 되는 결과를 보여주었다. 이를 분석하기 위해 CIE 색 좌표계의 NTSC (National Television System(s) Committee)를 이용하였는데, 범위 안에 있던 As is Device의 색 좌표가 Aging 후에는 NTSC범위 밖으로 이동하였는데, 이는 열화현상이 발생하기 전에 비해 방출되는 빛의 파장이 변했다는 것을 의미하며 정확한 색 재현이 안 된다는 것을 보여준다. 또한 I-V특성을 보면 Aging Device의 구동전압 (3.3V) 이 As is Device (2.7V) 에 비해 더 커지는 것을 확인하였는데 이것은 스트레스로 인해서 발생한 트랩에 의하여 캐리어의 이동도가 떨어졌기 때문에 구동 전압이 증가한 것으로 확인할 수 있다. 연구 결과를 통하여 OLED Device의 사용시간 누적에 따른 열화현상은 색 재현성과 휘도의 저하 그리고 구동전압 증가에 영향을 미친다는 것을 확인 하였다.