• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.641-646
• /
• 2005

To fabricate a single layer white organic light emitting diode (OLED), a novel non-conjugated blue emitting material PPPMA-co-DTPM copolymer was synthesized containing a perylene moiety unit with hole transporting and blue emitting ability and a triazine moiety unit with electron transporting ability. The devices were fabricated using PPPMA-co-DTPM $(PPPMA[70\;wt\%]:DTPM[30\;wt\%])$ copolymer by varying the doping concentrations of each red, green and blue fluorescent dye, by molecular-dispersing into Toluene solvent with spin coating method. In case of ITO/PPPMA-co-DTPM:TPB$(3\;mol\%):C6(0.04\;mol\%):NR(0.015\;mol\%)/Al$ structure, as they were molecular-dispersing into 30 mg/ml Toluene solvent, nearly-pure white light was obtained both (0.325, 0.339) in the CIE coordinates at 18 V and (0.335, 0.345) at 15 V. The turn-on voltage was 3 V, the light-emitting turn-on voltage was 4 V, and the maximum external quantum efficiency was $0.667\%$ at 24.5 V. Also, in case of using 40 mg/ml Toluene solvent, the CIE coordinate was (0.345, 0.342) at 20 V.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.353-360
• /
• 2008

The LGP with nanometer structures resulted in enhancement of optical efficiency. Its fundamental mechanism is to recycle the polarized light via one round-trip through QWP(Quarter-Wave Plate) but the maximum efficiency to reach with this method is limited up to 2. To get the larger efficiency than this limited one a LGP with nanometer-patterned grating is suggested. For its optimum design the computer simulation is performed and suggests a grating that the spatial frequency between adjacent patterns is 500nm, its height 250nm, duty cycle 50%, and its cross section is rectangular. On the basis of simulation results the LGP with nanometer-patterned grating is fabricated and its optical properties such as angular intensity distribution and CIE color coordinates are characterized. The angles of transmitted light are nearly the same as the results expected from the generalized Snell's law. Thus the Mathematica code, developed in this experiment, will be applied to designing the optimized LGP. The LGP with nanometer-patterened grating shows the enhancement of transmitted intensity distribution up to 4.9 times.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.641-648
• /
• 2011

This study investigated the effects of high pressure with or without thermal treatment on the cured color development and residual nitrite contents of model meat systems (pork, NaCl and sodium nitrite). At low nitrite levels (${\leq}50{\mu}g/g$), 200 MPa of pressure alone (P) did not develop the cured meat color (p>0.05). Thermal treatment (T) showed curing pigmentation (higher CIE L* and CIE a*), and the impacts were more effective when pressure was combined with thermal treatment (PT). In contrast, nitrite levels did not contribute to the cured meat color when ${\geq}200{\mu}g/g$ of nitrite was added to the meat. At high nitrite levels, although the typical cured color that is induced by thermal treatment did not present by pressure alone, the PT treatment still showed a pinker color with low residual nitrite content compared to the T treatment. The higher the pressure level (300 MPa), the greater the cured meat pigmentation with lower residual nitrite. Therefore, the present study demonstrates the possible application of high pressure, both for cured pigmentation and reducing residual nitrite, respective to typical thermal treatments.

• Journal of Technologic Dentistry
• /
• v.33 no.4
• /
• pp.313-321
• /
• 2011

Purpose: The purpose of this study was to compare color parameters of different fabrication method of Lava ceram powder, Lava DVS blocks, IPS e.max ceram and IPS e.max zirpress. Methods: The three available shades(A1, A2, A3.5) of Lava & Kavo zirconia blocks were examined. For each of three colors, three different thickness were tested, 5 times of measurement frequency. The measurements were made using a spectrophotometer equipped with an integrating sphere using the CIE $L^*$, $a^*$, $b^*$ colorimetric system. Results: Lava build-up group and Lava DVS group showed clinically perceived color difference, on the other hand IPS e.max build-up group and IPS e.max zirpress group did not show clinically perceived color difference to shade allowed on core. When the thickness of porcelain veneer increased from Lava and IPS e.max groups, color differences(${\Delta}E$) were decreased. Conclusion: All-ceramic system has color characteristics that clinicians have to consider when selecting materials. Also, manufacturers of different porcelain systems must make every effort to achieve color reproducibility.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.55-58
• /
• 2004

Recently the examples of a lighting design with LED source have increased rapidly, but there are few researches that are related to selecting luminous colors by LED. The research is that respondents operated color blender and got preference colors according to what they made, the colors were measured by chroma meter and marking CIE 1931 chromaticity diagram. Through the results of the research has made group preference for luminous colors. From now on, not only does it seem capable of using a designing a building-lighting to which LED but it will be actively applied to controlling with a digital technology for lighting design.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.59-64
• /
• 2003

To Photochoromic lens light irradiation side darkening status and fading status photo-transmittance decrease. If remove light irradiation, get into fading state and photo-transmittance has reversibility process that get back originally in state. Get CIE $L^*a^*b^*$ relationship colorimetric using darkening in Photochoromic lens and at fading process. Photochromism's spectrophotometer that produce itself. Darkening and fading state colorimetric ($a^*-b^*$) linear be curvy, and is gradidnt of (-) value. And change lineally. The colorimetric transfer amount is Blue ${\rightarrow}$ Yellow, Red ${\rightarrow}$ Green form. Colorimetric is low $b^*$ value than darkning state in fading state, and Photochromism's coodination transfer moves on the contrary with darkning state, photochoromism relationship estimation method about photochoromic lens can use by colorimetric difference about darkening and fading.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.3
• /
• pp.357-361
• /
• 2009

The authors have demonstrated white oraganic light-emitting diodes (WOLED) using 1,4-bis[2-(4'-diphenylaminobiphenyl-4-yl)vinyl]benzene as fluorescent blue emitter and iridium(III) bis(5-acetyl-2-phenylpyridinato-N,C2') acetylacetonate as phosphorescent red emitter. The optimized WOLED using red host material as bis(2-methyl-8-quinolinato) -4-phenylphenolate exhibited proper color stability in comparison with the control device using 4,4'-N,N'-dicarbazole-biphenyl as red host. The white device showed a maximum luminance of 21100 $cd/m^2$ at 14 V, luminous efficiency of 9.7 cd/A at 20 $mA/cm^2$, and Commission Internationale de I'Eclairage ($CIE_{x,y}$)coordinates of (0.32, 0.34) at 1000 $cd/m^2$. The devices also exhibited the color shift with ${\Delta}CIE_{x,y}$ coordinates of ${\pm}$ (0.01,0.01) from 100 to 20000 $cd/m^2$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.2
• /
• pp.279-282
• /
• 2002

Twenty six male Hanwoo (Korean cattle) carcasses were measured for pH, temperature and instrumental color changes of loins during 24 h post-mortem carcass chilling at $4^{\circ}C$ in the cooler. The average internal temperature of loins was about $5^{\circ}C$ after 24 h of chilling, and with the exclusion of those with an ultimate pH>6.0 (dark-cutters), the average pH value was 5.5. When all carcasses were considered for the partial correlation coefficient between color and pH, with the temperature effect excluded, CIE $L^*$, $a^*$ and $b^*$ seemed to be affected significantly by pH during chilling process (p<0.001). However, when carcasses with dark-cutting condition were excluded, the correlation coefficients were much lower. In contrast, when the partial correlation coefficients between color and temperature, excluding the effect of pH on them, were analyzed, the relationship between color and temperature did not change much after values of DFD (dark, firm, dry) beef were excluded. The results suggested that the known interrelationship of color and pH in chilled beef loins be mainly due to the influence of temperature on pH and color.

• Journal of Animal Science and Technology
• /
• v.55 no.6
• /
• pp.551-557
• /
• 2013

This study was conducted to analyze the genotypes and genes of FABP3 (Fatty-acid Binding Protein 3) in pigs using MSPI restriction enzyme and electrophoresis. Analysis of data collected from a total of 210 crossbred pigs (LYD or YLD) in Chungcheongnam-do, Korea, revealed the following. The AA genotypes of FABP3 were detected in the 750 bp and 100 bp bands, while the Aa heterotype appeared in the 850, 750 and 100 bp bands and the aa recessive homotype was detected in a single band of 850 bp. The genotype frequency of AA, Aa and aa was 46.67%, 51.43% and 1.90%, respectively. The genetic equilibrium of this population showed a significant difference (p<0.001) based on a ${\chi}^2$-test. The carcass weight, backfat thickness, marbling score, pH, drip loss, cooking loss, and meat color based on the CIE $L^*$, and $b^*$ values according to genotypes of FABP3 did not differ significantly (p>0.05); however, the CIE $a^*$ values did (p<0.05).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.484-484
• /
• 2012

OLED는 유기재료를 사용하는 특수성 때문에 선명한 고품질의 화질을 얻을 수 있다. 유기재료에 따른 수명이 정해져 있지만 열에 약한 재료를 사용하기 때문에 출력되는 색의 변화를 동반할 만큼 불안정 하다. OLED는 RGB를 순서에 따라 유리 기판 상에 나열한 구조이며 각 화소의 양극과 음극은 가로와 세로로 서로 직교하고 있다. 이러한 OLED의 구조 때문에 직, 간접적으로 전이되는 열과 OLED Device에서 발생하는 자체 열로 인하여 유기소자의 특성이 변형되는, 이른바 열화현상에 쉽게 노출되어 있다. OLED Device를 제작한 후 72시간동안 8V의 전압을 인가하여 열화현상을 촉진시킨 Aging샘플을 확보 하였다. Aging된 Device의 인가전압을 3V ~ 6V까지 변화를 주고 측정해본 결과 각각의 모든 전압에서 Aging Device의 Nomalized Intensity가 상대적으로 20% 감소했음을 확인 하였다. 또한 Aging 된 Device는 As is Device에 비해 단파장 쪽으로 Shift 되는 결과를 보여주었다. 이를 분석하기 위해 CIE 색 좌표계의 NTSC (National Television System(s) Committee)를 이용하였는데, 범위 안에 있던 As is Device의 색 좌표가 Aging 후에는 NTSC범위 밖으로 이동하였는데, 이는 열화현상이 발생하기 전에 비해 방출되는 빛의 파장이 변했다는 것을 의미하며 정확한 색 재현이 안 된다는 것을 보여준다. 또한 I-V특성을 보면 Aging Device의 구동전압 (3.3V) 이 As is Device (2.7V) 에 비해 더 커지는 것을 확인하였는데 이것은 스트레스로 인해서 발생한 트랩에 의하여 캐리어의 이동도가 떨어졌기 때문에 구동 전압이 증가한 것으로 확인할 수 있다. 연구 결과를 통하여 OLED Device의 사용시간 누적에 따른 열화현상은 색 재현성과 휘도의 저하 그리고 구동전압 증가에 영향을 미친다는 것을 확인 하였다.