• 제목/요약/키워드: Chromium substitution.

검색결과 17건 처리시간 0.028초

Crystal Growth of Chromium (4+) Ion Doped Yttrium Aluminum Garnet

  • Yu, Y.M.;Jeong, S.J.;Koh, J.C.
    • 한국결정성장학회:학술대회논문집
    • /
    • 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
    • /
    • pp.53-53
    • /
    • 1998
  • Four valence of Chromium ion doped Yttrium Aluminum Garnet crystals were grown by Floating Zone and Czochralski methods. Changes of valence for Chromium (3+) ion to Chromium (4+) were achieved by substitution of Yttrium ion in dodecahedral site to Calcium and by substitution of Aluminum in octahedral site to Magnesium. Growth conditions for high quality of crystals were investigated. Grown crystals were cut and polished and then observed various types of defects. Characterizations by means of measurement of density and lattice parameter as a function of solidification fraction were performed. Results of Q-switching test using grown crystals were also reported.

  • PDF

아연도금용 친환경 3가 크로메이트 표면처리기술 (Environment-friendly Trivalent Chromate Treatment for Zn Electroplating)

  • 김수원;이철태
    • 공업화학
    • /
    • 제17권5호
    • /
    • pp.433-442
    • /
    • 2006
  • 금속표면처리 기술 분야에서 광범위하게 적용되어온 6가 크롬에 의한 부식억제방법은 더 이상 사용할 수 없는 단계에 이르렀다. 전 세계적으로 자동차 산업에 적용되기 시작한 이 6가 크롬사용에 대한 규제는 전자산업을 비롯한 모든 산업에 예외 없이 적용될 것이다. 이에 따라 새로운 부식억제 방법이 절대적으로 필요하며, 3가 크롬을 바탕으로 하는 새로운 부식억제 방법이 그 자리를 대신할 것이다. 따라서 본 총설에서는 6가 크로메이트 대체를 위한 화성코팅에 대한 공정 개발을 위해 현재까지 진행된 과정 및 제안된 3가 크롬화성코팅을 소개하여 획기적인 3가 크로메이트 화성코팅 공정의 확립에 기여하고자 한다.

슈퍼 2상 스테인리스강에서 χ와 σ상의 석출거동에 미치는 W치환의 영향 (Effect of W Substitution on the Precipitation Behavior of χ and σ Phase in Super Duplex Stainless Steels)

  • 한현성;김성휘;강창룡
    • 한국재료학회지
    • /
    • 제26권4호
    • /
    • pp.200-206
    • /
    • 2016
  • This study was carried out to investigate the effect of W substitution on the precipitation behavior of ${\chi}$ and ${\sigma}$ phases in super duplex stainless steel. The ${\chi}$ phase was precipitated at the interface of ferrite / austenite phases and inside the ferrite phase at the initial stage of aging. With an increase in the aging time, the volume fraction of the ${\chi}$ phase increased, and then decreased with the transformation from the ${\chi}$ phase to the ${\sigma}$ phase. The ${\sigma}$ phase was precipitated later than the ${\chi}$ phase, and the volume fraction of x phase increased with the increase in the aging time. The ferrite phase was decomposed into the new austenite (${\gamma}2$) and ${\sigma}$ phases by aging treatment. The decomposition of the ferrite phase into the ${\gamma}2$ and ${\sigma}$ phases was retarded by W substitution for Mo. The volume fraction of the ${\chi}$ phase increased and that of the ${\sigma}$ phase decreased due to W substitution. The ${\chi}$ and ${\sigma}$ phases were intermetallic compounds, which had lower nickel concentration, and higher chromium, molybdenum, and tungsten concentrations. The ${\chi}$ phase has higher molybdenum and tungsten concentrations than those of the ${\sigma}$ phase. The amounts of chromium and nickel in the ${\chi}$ and ${\sigma}$ phases did not change, but these phases have higher concentrations of molybdenum and tungsten due to W substitution for Mo.

2205 2상 스테인리스강의 내식성에 미치는 텅스텐 치환의 영향 (Effect of Tungsten-Substitution on the Corrosion Resistance of 2205 Duplex Stainless Steel)

  • 김기엽;안용식;정병호
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제27권6호
    • /
    • pp.704-713
    • /
    • 2003
  • The effect of partial substitution of tungsten for molybdenum on the microstructure and corrosion resistance in 22Cr-5Ni-3Mo duplex stainless steel(DSS) aging heat treated in a temperature range of 600~$1000^{\circ}C$ has been investigated. Electrochemical tests were carried out for the evaluation of corrosion resistance. Aging treatment had hardly influenced the general corrosion resistance. With the increase of aging time, the pitting corrosion resistance of the DSS had decreased, After aging for 2min at 700~$900^{\circ}C$, the pitting potential of the 3Mo steel decreased remarkably, while that of the W-substituted steel hardly changed. During aging. the intermetallic $\sigma$ and secondary austenite ($\gamma_2$) phases were precipitated. and the pitting corrosion and intergranular corrosion resistance were significantly decreased after aging at 700~$750^{\circ}C$ for 10 h, which could be caused by the $\gamma_2$ formation. The ${\gamma}$$_2$ phase could affect the depletion of molybdenum and chromium in the $\gamma_2/\alpha and \gamma_2/\sigma$ boundaries.

Cr 치환을 이용한 고전압용 양극 활물질 LiNi0.5Mn1.5O4의 구조와 전기화학적 성능의 개선 (Improvement of Structure and Electrochemical Properties of LiNi0.5Mn1.5O4 for High Voltage Class Cathode Material by Cr Substitution)

  • 엄원섭;김율구;조원일;장호
    • 전기화학회지
    • /
    • 제8권2호
    • /
    • pp.82-87
    • /
    • 2005
  • 고전압 용 양극산화물 $LiNi_{0.5}Mn_{1.5}O_4$는 고온에서 합성 시, 입자 내에 산소결함에 의한 불순물상을 만들게 된다. 불순물상은 불완전한 스피넬 구조를 형성하며 리튬이온의 삽입$\cdot$탈리를 방해하여 전극의 성능을 감소시킨다. 본 연구에서는 고온 열처리 시 생성되는 이러한 불순물상의 거동을 파악하기 위해 크롬을 치환한 $LiNi_{0.5-x}Mn_{1.5}Cr_xO_4(0{\leq}x{\leq}0.05)$를 졸$\cdot$겔법을 이용하여 합성하여 고온 열분석을 실시하였다. 열분석 결과 크롬이 치환되지 않은 양극활물질은 산소결함에 의한 $2\%$의 무게 감소를 보였으나, 크롬이 치환된 경우 무게 감소분이 줄어들어 불순물 생성이 억제됨을 알 수 있었다. XRD 분석에서도 크롬이 치환된 경우 불순물 상이 억제됨을 나타내었으며 불순물상의 감소로 인해 크롬을 첨가한 양극활물질 $LiNi_{0.5-x}Mn_{1.5}Cr_xO_4$를 사용한 경우 충·방전 실험 시 가역 용량과 싸이클 안정성이 향상됨을 볼 수 있었다.

페라이트 촉매의 Cr 치환효과와 에틸벤젠의 탈수소반응 (The Effects of Cr-Substitution in Ferrite Catalysts and the Catalytic Dehydrogenation of Ethylbenzene)

  • 임기철;김을산;이호인
    • 공업화학
    • /
    • 제2권3호
    • /
    • pp.279-288
    • /
    • 1991
  • 몇 종류의 산화물을 혼합하여 그 장점들이 촉매의 특성으로 나타나도록 하는 복합산화물 촉매의 한 종류로서 스피넬 구조를 이루는 Mg- 및 Zn-페라이트를 촉매로 선정하여 Cr 치환에 따른 물성을 분석하고, 에틸벤젠의 탈수소 반응에 대하여 연구하였다. 촉매의 특성 분석에는 XRD, BET, TG/DTA, ESCA, TEM, TPD등의 분석법을 사용하였다. 페라이트 촉매에 대한 Cr 치환 효과를 검토하기 위하여 물성을 종합적으로 분석한 결과, 표면으로의 확산이 용이한 Cr 은 촉매의 표면적 증가와 구조의 안정성에 기여하는 구조적인 조촉매로서 작용하였다. 촉매의 반응성 실험에 있어서는 Cr의 치환에 따른 활성변화를 검토하였는데, $MgCr_xFe_{2-x}O_4$ 촉매에서 Cr 치환량이 증가할수록 산소의 유동성이 작아져 완전산화반응이 억제되고 스티렌으로의 선택도가 증가하였다.

  • PDF

Effects of Sulfur Substitution on Chemical Bonding Nature and Electrochemical Performance of Layered LiMn0.9Cr0.1O2-xSx

  • Lim, Seung-Tae;Park, Dae-Hoon;Lee, Sun-Hee;Hwang, Seong-Ju;Yoon, Young-Soo;Kang, Seong-Gu
    • Bulletin of the Korean Chemical Society
    • /
    • 제27권9호
    • /
    • pp.1310-1314
    • /
    • 2006
  • Sulfur-substituted $LiMn_{0.9}Cr_{0.1}O_{2-x}S_x$ $(0\;\leq\;x\;\leq\;0.1)$ layered oxides have been prepared by solid state reaction under inert atmosphere. From powder X-ray diffraction analyses, all the present lithium manganates were found to be crystallized with monoclinic-layered structure. Electrochemical measurements clearly demonstrated that, in comparison with the pristine $LiMn_{0.9}Cr_{0.1}O_2$, the sulfur-substituted derivatives exhibit smaller discharge capacities for the entire cycle range but the recovery of discharge capacity after the initial several cycles becomes faster upon sulfur substitution. The effect of the sulfur substitution on the chemical bonding nature of $LiMn_{0.9}Cr_{0.1}O_{2-x}S_x$has been investigated using X-ray absorption spectroscopic (XAS) analyses at Mn and Cr K-edges. According to Mn K-edge XAS results, the trivalent oxidation state of manganese ion remains unchanged before and after the substitution whereas the local structure around manganese ions becomes more distorted with increasing the substitution rate of sulfur. On the other hand, the replacement of oxygen with sulfur has negligible influence on the local atomic arrangement around chromium ions, which is surely due to the high octahedral stabilization energy of $Cr^{+III} $ ions. Based on the present experimental findings, we have suggested that the decrease of discharge capacity upon sulfur substitution is ascribable to the enhanced structural distortion of $MnO_6$ octahedra and/or to the formation of covalent Li-S bonds, and the accompanying improvement of cyclability would be related to the depression of Mn migration and/or to the pillaring effect of larger sulfur anion.

25Cr-7Ni-2Mo-4W 슈퍼 2상 스테인리스강의 충격인성에 미치는 χ상의 영향 (Effect of χ Phase on Impact Toughness of 25Cr-7Ni-2Mo-4W Super Duplex Stainless Steel)

  • 남궁원;강창룡
    • 한국해양공학회지
    • /
    • 제27권2호
    • /
    • pp.75-79
    • /
    • 2013
  • This study was carried out to investigate the precipitation behavior of the ${\chi}$ phase and the impact toughness of 25%Cr-7%Ni-2%Mo-4%W super duplex stainless steel. The ${\chi}$ phase was precipitated in the early stage of aging, and with the increasing aging time. However, after reaching a maximum value, the number decreased as a result of the gradual transformation of the ${\chi}$ phase into the ${\sigma}$-phase. It was proved that the ${\chi}$ phase was an intermetallic compound, which represented a lower nickel concentration, higher chromium and molybdenum concentrations, and very higher tungsten concentration compared to the matrix phases. It also showed higher molybdenum and tungsten concentrations than the ${\sigma}$ phase. The decomposition of the ferrite phase into the ${\gamma}_2$ and ${\sigma}$ phases was retarded by W substitution for Mo. Thus, the number of ${\chi}$ phases increased. The impact value was decreased by the substitution of W for Mo. The impact toughness rapidly decreased with time when the ${\chi}$ phase began to precipitate in the initial stage of aging. The impact toughness was, therefore, greatly influenced for the precipitation of the ${\chi}$ phase.

Chromium(III) 錯物의 光化學的 反應性 (Photochemical Reactivity of Chromium(III) Complexes)

  • 정종재;황정의;최종하
    • 대한화학회지
    • /
    • 제30권2호
    • /
    • pp.181-187
    • /
    • 1986
  • $trans-Cr^{Ⅲ}N_4XY$착물의 광화학적 치환반응에 있어서 한개의 리간드가 떨어져서 생기는 가상적 1차중간체의 총안정화에너지를 고려함으로서 치환되는 리간드를 예측할 수 있다. 총안정화 에너지와 d-궤도함수의 1전자에너지준위는 각종첩모형체계내에서 계산하였는데, 계산결과에 의하면 총안정화에너지 값이 큰 중간체일수록 보다 쉽게 생성된다고 할 수 있다. 결과적으로 총안정화에너지의 상대적인 값은 가장 낮은 에너지의 d-d전이에 해당하는 파장의 빛을 쪼여줄 때 $trans-Cr^{Ⅲ}N_4XY$착물에서 어느 리간드가 우선적으로 불안정하게 되는가를 결정하는데 이용될 수 있으며, $trans-Cr^{Ⅲ}N_4XY$착물의 광수화반응에 있어서 떨어지는 리간드에 대한 이러한 예측은 실험상의 결과와 일치하고 있다.

  • PDF

반응성염료를 통한 Cr 함유 금속착염염료의 대체를 위한 연구 (A Study on the Substitution of Cr-containing Metal Complex Dyestuff with Reactive Dyestuff)

  • 박영환;김문정;이혜정;임재호;류태수
    • 청정기술
    • /
    • 제15권2호
    • /
    • pp.91-101
    • /
    • 2009
  • 아마이드계 섬유를 고농도로 염색할 때 피염물의 우수한 견뢰도를 얻기 위해 사용되는 금속착염(metal complex) 염료의 대부분은 Cr을 함유하고 있는 유독성 염료이어서, 잔욕에 남게 등의 환경적인 문제를 일으킬 뿐 아니라, $Cr^{6+}$를 함유할 경우 인체에도 심각한 질병을 줄 수 있다. 본 연구에서는 이러한 금속착염 염료를 대체하기 위해 중금속 함유량을 최소화한 반응성 염료를 양모와 나일론 염색에 응용하였다. 각 섬유에 대한 반응성 염료의 염색성을 파악하고, 실제 염색공장에서의 적용을 위해 색상 영역별 흡진률과 견뢰도 수준을 확인하였다. 또한 반응성 염료들에 대한 중금속 함량 및 유해아민분석을 통하여 그 유해성 경향을 수치적으로 검증하며, 기존 사용 염료와의 비교를 통해 미래 지향적인 청정염료로서의 가능성을 보고자 하였다.