• Elastomers and Composites
• /
• 제40권1호
• /
• pp.45-52
• /
• 2005

풀러렌[$C_{60}$]은 3-chloroperoxy benzoic acid, benzoyl peroxide, trichloroisocyanuric acid, chromium(VI) oxide 등의 산화제를 사용하여 마이크로파 조건에서 반응시켜 풀러렌 산화물[$C_{60}(O)_n$] ($n=1{\sim}4$ or n=1)을 합성하였다. 동일한 마이크로파 조건에서 여러 가지 산화제와 풀러렌[$C_{60}$]의 고체상태 반응성은 3-chloroperoxy benzoic acid>benzoyl peroxide>trichloroisocyanuric acid$\simeq$chromium(VI) oxide 순으로 증가함을 나타냈다. MALDI-TOF-MS, UV-visible, 그리고 HPLC를 사용하여 분석한 결과 생성된 풀러렌 산화물은[$C_{60}(O)_n$] ($n=1{\sim}4$ or n=1)임을 알 수 있었다.

• Elastomers and Composites
• /
• 제39권4호
• /
• pp.309-317
• /
• 2004

풀러렌[$C_{70}$]을 3-chloroperoxy benzoic acid, chromium (VI) oxide, benzoyl peroxide, trichloroisocyanuric acid 등의 산화제를 사용하여 마이크로파 조건에서 반응시켜 풀러렌 난화물[$C_{70}O_n$] ($n=1{\sim}3$ or n=1)을 합성하였다. 동일한 마이크로파 조건에서 여러가지 산화제와 풀러렌[$C_{70}$]의 고체상태 반응성은 3-chloroperoxy benzoic acid > chromium(VI) oxide > trichloroisocyanuric acid $\simeq$ benzoyl peroxide 순으로 증가함을 나타냈다. MALDI-TOF-MS, UV-visible, 그리고 HPLC를 사용하여 분석한 결과 생성된 풀러렌 산화물은 [$C_{70}O_n$] ($n=1{\sim}3$ or n=1)임을 알 수 있었다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.280-281
• /
• 2006

Powder grades pre-alloyed with 1.5-3 wt% chromium can be successfully sintered at the conventional temperature $1120^{\circ}C$ although well-monitored sintering atmospheres are required to avoid oxidation. Mechanical properties of the Cr-alloyed PM grades are enhanced by a higher sintering temperature in the range $1120-1250^{\circ}C$, due to positive effects from pore rounding, increased density and more effective oxide reduction. Astaloy CrM (Fe-3 wt% Cr-0.5 wt% Mo) with 0.6 wt% graphite added obtains an ultimate tensile strength of 1470 MPa and an impact strength of 31 J at density $7.1\;g/cm^3$, after sintering at $1250^{\circ}C$ followed by cooling at $2.5^{\circ}C/s$ and tempering.

• Applied Biological Chemistry
• /
• 제41권1호
• /
• pp.89-94
• /
• 1998

크롬의 산화는 자연계에 존재하는 여러 가지의 Mn-oxide에 의해 일어나며 산화과정에 존재하는 크롬 화학종들은 반응계 내에서 흡착, 침전 현상을 유발할 수 있고 결과적으로 산화반응을 조절할 수 있을 것이다. 본 연구에서는 birnessite와 pyrolusite에 의한 크롬의 산화에서 크롬 화학종이 반응에 미치는 영향을 조사하였다 Mn-oxide는 그 종류에 따라 크롬 산화력에서 큰 차이를 보였으며 용액의 pH와 초기 3가 크롬 첨가량도 산화반응에 큰 영향을 미쳤다. 동일 표면적당의 산화력을 비교하면 pyrolusite의 산화력은 birnessite의 5% 정도에 불과하였다. 이는 pyrolusite 의 결정도에 크게 기인하며 또한 양으로 하전된 표면 특성 때문에 반응물인 3가 크롬의 접근이 어렵고 반응산물인 6가 크롬의 흡착 등에 기인하는 것으로 보인다. Birnessite에 의한 산화반응에서 pH 3에서는 oxide의 표면에서의 크롬 화학종들의 흡착이나 침전 현상은 발견되지 않았으며 pyrolusite의 경우 일부 6가 크롬의 흡착이 나타났으나 침전현상은 발견되지 않았다. 따라서 pH 3의 경우 산화반응은 Mn-oxide의 특성에 따라 결정된다. Mn-oxide에 의한 크롬의 산화는 열역학적으로 용액의 pH가 높아질수록 더 진행되어야 한다. Birnessite의 경우 pH 5에서 오히려 산화반응이 현저히 저해되었는데 이는 birnessite의 표면에 형성되는 3가 크롬의 침전이 반응표면을 감소시킴으로써 나타나는 현상으로 판단된다. Pyrolusite의 경우 pH 3보다 pH 5에서 크롬의 산화는 더 일어나나 초기 3가 크롬의 첨가량이 많아지면서 반응이 억제된다. 일부 3가와 6가 크롬의 흡착이 일어나나 이 경우도 역시 pyrolusite의 표면에 형성되는 3가 크롬의 침전이 반응을 조절하는 주 요인으로 생각된다. Mn-oxide의 표면에 형성되는 3가 크롬의 침전은 산화가 일어날 수 있는 반응표면을 감소시키고 또한 반응물의 농도를 낮춤으로써 용액의 pH가 높고 3가 크롬의 첨가량이 많아질 때 크롬의 산화반응을 억제하는 주 요인이 되는 것으로 판단된다.

• 대한치과보철학회지
• /
• 제35권1호
• /
• pp.78-94
• /
• 1997

The purpose of this experiment was to determine the effects of various treatments on denture base resin to metal bond for cobalt-chromium alloy. The metal surface was treated as follows. Group 1 : Sandblasted with $50{\mu}m$ aluminum oxide. Group 2 : Sandblasted with $250{\mu}m$ aluminum oxide. Group 3 : Sandblasted with $250{\mu}m$ aluminum oxide and followed by silicoating. Group 4 : Electrochemically etched. Group 5 : treated with oxidizing solution. Group 6 : Beaded with $200{\mu}m$ retention structure and followed by silicoating. All specimens were applied with 4-META resin and were thermocycled 1000 times at temperature of $5^{\circ}C$ to $55^{\circ}C$. The effects of various surface treatments on the bond strength between 4-META resin and metal interface were measured by using the universal testing machine. All specimens were observed with SEM. The results were as follows 1. The bond strength of 4-META resin were significantly higher to Co-Cr alloy. 2. The bond strength decreased in the following orders : group 6, group 3, groups 1 and 2, group 4, group 5 and there was no statistically significant difference in bond strength among groups 1 and 2.(p>0.05) 3. The bond strength of cobalt-chromium alloy to 4-META resin were not significantly different.(p>0.05) 4. The treated surface of groups 1, 2 and 3 has more fine undercut than that of groups 4 and 5 with SEM. 5. Stable adhesion can be achieved when mechanically roughened metal surface by sandblasting than treating in an electrochemical etching and an oxidizing solution with potassium manganate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.409-414
• /
• 1999

The influence of ion beam energy and reactive oxygen partial pressure on the electrical and crystallographic characteristics of transition metal oxide compound(Cr0x) film was studied in this paper. Chromium oxide films were prepared onto the coverglass using Ion Beam Sputter Deposition(1BSD) technique according to the processing conditions of the partial pressure of reactive oxygen gas and ion beam energy. Crystallinity and grain size of as-deposited films were analyzed using XRD analysis. Thickness and Resistivity of the films were measured by $\alpha$-step and 4-point probe measurement. As results, according to the XRD, XPS and resistivity measurement, the deposited films were the cermet type films which has a crystal structure including amorphous oxide(a-oxide) phase and metal Cr phase simultaneously. The increasernent of the ion b m energy during the deposition process happened to decreasernent of metal Cr grain size and the rapid change of resistivity above the critical $O_2$ partial pressure.

• 소성∙가공
• /
• 제6권2호
• /
• pp.95-101
• /
• 1997

The thermal fatigue and wear properties of high speed steel roll which was recently developed were investigated by observing microstructure, by measuring mechanical and physical properties, by conducting thermal fatigue testing, and by measuring the amount of wear in actual mill. High speed steel roll had better thermal fatigue testing, and by measuring the amount of wear in actual mill. High speed steel roll had better thermal fatigue life than high chromium iron roll, which was due to lower carbide content, higher strength, and higher thermal conductivity. The amount of wear of high speed steel roll was nearly the same as that of high chromium iron roll in the first finishing stand, which was due to the oxide formation on the roll surface. However, in the third finishing stand, the wear resistance of high speed steel roll was 2~3 times as good as that of high chromium iron roll because the former had higher hardness at high temperature.

• Bulletin of the Korean Chemical Society
• /
• 제16권3호
• /
• pp.214-216
• /
• 1995

Passive films formed on chromium surface in citrate buffer solution were investigated by means of three-parameter ellipsometry. The citrate buffer was found to be a suitable medium in which oxide film on chromium could be removed by cathodic treatment, providing a reference surface for the optical study. The passive film effectively protecting the chromium surface from corrosion was found to have thicknesses in the range 0.65 to 1.25 nm depending on the potential in the range of -0.20 to 0.60 V (0.1M KCl calomel electrode). The complex refractive index of the passive film did not show significant potential-dependent changes, indicating that the composition of the film material does not depend on potential.

• 자원리싸이클링
• /
• 제13권2호
• /
• pp.9-15
• /
• 2004

석유화학공정으로부터 폐기되는 폐산화철촉매를 이용하여 도금합성폐수중 크롬회수에 관한 연구를 회분식과 연속식으로 실시하였다. 도금합성제수 중 $CrO _{4}^{-2}$ 형태의 음이온으로 존재하는 6가 크롬은 폐산화철촉매의 등전점(pH 3.0)이하에서 폐촉매와 물리적 흡착을 한다. 한편, 6가 크롬은 pH 3.0 이상에서도 폐촉매의 수산화철과 산화환원반응에 의해 일부 환원되어 $Cr(OH)_3$로 침전한다. 컬럼을 이용한 크롬 연속회수실험에서 크롬합성폐수의 pH가 0.5∼2.0일 때 폐촉매의 크롬흡착량은 2.0∼2.3g/L이며, pH가 3.0에서는 1.5g/L이었다. 폐수 중 크롬농도가 50∼500mg/L로 높아질수록 폐촉매에 흡착한 크롬누적량은 1.29∼8.56g/L로 증가하지만, 유속이 30∼80 ml/mm으로 증가하여도 크롬 흡착누적량은 2.21∼2.49 mg/L로 거의 유사하였다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.97-102
• /
• 1998

Transition metal Cr3+ and Fe3+ ion was diffused in white sapphire {0001}, {1010} crystal plane which were grown by the Verneuil method. It enhanced and changed the physical, electrical and optical properties of sapphires. After mixing the metallic oxide and metal powder, it were used for diffusion. Metallic oxide was synthesized by precipitation method and it's composition was mainly alumina which doped with chromium or ferric oxide. In case using metallic oxide, the dopping was slowly progressed and it needed the longer duration time and higher temperature, relatively. Metallic powder was vapoured under 1x10-4 torr of vacuum pressure at 1900(iron metal) and 2050(chromium)℃, first step. Diffusion condition were kept by 6atm of N2 accelerating pressure at 2050∼2150℃. Each surface density of sapphire crystal are 0.225(c) and 0.1199atom/Å2(a). The color of the Cr-doped sapphires was changed to red. Dopping reaction was come out more deep in th plane of {1010} than {0001}. It was speculated that the planar density was one of the factors to determine diffusion effect.