• 분석과학
• /
• 제8권4호
• /
• pp.457-460
• /
• 1995

A new hollow fiber filled with the lower refractive index liquid as core constructs a liquid core optical fiber(LCOF). The LCOF have been used as colorimetric cell to determine elements Cr and Cu in the presence of 70%- 50% ethanol or 50% dioxane aqueous solution, based on colored complex of Chromium(VI) with Diphenycarbazid(DPC) and copper with Chromaurd S(CAS) respectively. The sensitivity (1/ng/ml) of calibration curve of Cr and Cu are 0.052, 0.017 over the range 0 - 25, 0 - 24(ng/ml) respectively. The Cr in the animal gum and Nation Standard of China are determined with recoveries of 94 - 102%.

• Bulletin of the Korean Chemical Society
• /
• 제33권4호
• /
• pp.1247-1252
• /
• 2012

In this paper, a potentiometric sensor based on polyaniline conducting polymer for potentiometric determination of Cr (VI) ions is reported. Polyaniline was synthesized electrochemically (cyclic voltammetry method) onto a micro pencil graphite electrode (0.7 mm diameter) in the presence of HCl and diphenylcarbazide (termed as (PGE/PAni/DPC). Some initial experiments were performed in order to find out the optimized conditions for preparation of the introduced Cr (VI) sensor electrode. The plot of E vs. log [Cr (VI)], showed a linear response in the range from $1.0{\times}10^{-6}$ to $1.0{\times}10^{-1}$ M. High repeatability with the detection limit of $8.0{\times}10^{-7}$ M was obtained.

• Membrane and Water Treatment
• /
• 제12권1호
• /
• pp.11-21
• /
• 2021

A novel activated carbon produced from cherry laurel (Laurocerasus officinalisRoem.) seeds (CLSAC) by chemical activation with ZnCl2 was used as an adsorbent to remove Cr(VI) ions from aqueous solutions. CLSAC was characterized by several techniques and the adsorption experiments were performed in a batch model adsorption technique. The effects of various experimental parameters were investigated as a function of solution pH, contact time, initial Cr(VI) concentration, CLSAC concentration, and temperature. The monolayer adsorption capacity of CLSAC was found to be 41.67 mg g-1 for 5.0 g L-1 of CLSAC concentration and, it was concluded that CLSAC can be used as an effective adsorbent for removal of Cr(VI) from waters and wastewaters.

• Bulletin of the Korean Chemical Society
• /
• 제25권8호
• /
• pp.1277-1279
• /
• 2004

• Journal of Microbiology and Biotechnology
• /
• 제16권11호
• /
• pp.1720-1727
• /
• 2006

To set up a kinetic model that can provide a theoretical basis for developing a new mathematical model of the Cr(VI) biosorption column using brown seaweed Ecklonia biomass, a differential reactor system was used in this study. Based on the fact that the removal process followed a redox reaction between Cr(VI) and the biomass, with no dispersion effect in the differential reactor, a new mathematical model was proposed to describe the removal of Cr(VI) from a liquid stream passing through the differential reactor. The reduction model of Cr(VI) by the differential reactor was zero order with respect to influent Cr(IlI) concentration, and first order with respect to both the biomass and influent Cr(VI) concentrations. The developed model described well the dynamics of Cr(VI) in the effluent. In conclusion, the developed model may be used for the design and performance prediction of the biosorption column process for Cr(VI) detoxification.

• Archives of Pharmacal Research
• /
• 제8권4호
• /
• pp.229-236
• /
• 1985

Oxidation of presenegenin dimethyl ester triacetate with chromium trioxide in acetic acid yielded two compounds, 11-ketone (IV) and 12-ketone (IV) derivatives. The latter was a main product. On mild alkaline hydrolysis, IV afforded 11-keto-presenegenin dimethyl ester (V), mp 232-$234^{\circ}$, $C_{32}H_{48}O_{8}$, whereas VI did 12-keto-presenegenin dimethyl ester 12, 27-hemiketal (VIII), mp 240-$242^{\circ}$, $C_{32}H_{50}O_{8}$.

• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.6039-6046
• /
• 2013

Cr(VI)-헤테로고리 착물[Cr(VI)-2-methylpyrazine]를 합성하여, 적외선 분광광도법(IR), 유도결합 플라즈마(ICP)등으로 구조를 확인하였고, 여러 가지 용매 하에서 Cr(VI)-2-methylpyrazine를 이용하여 벤질 알코올의 산화반응을 측정한 결과, 유전상수(${\varepsilon}$) 값이 큰 용매 순서인 시클로헥센 < 클로로포름 < 아세톤 < N,N-디메틸포름아미드 용매 하에서 높은 산화반응성을 보였다. 산 촉매(HCl)를 이용한 DMF 용매 하에서 Cr(VI)-2-methylpyrazine은 벤질 알코올(H)과 그의 유도체들(p-$CH_3$, m-Br, m-$NO_2$)을 효과적으로 산화시켰다. 전자받개 그룹들은 반응 속도가 감소한 반면에 전자주개 치환체들은 반응속도를 증가시켰고, Hammett 반응상수(${\rho}$) 값은 Cr(VI)-2-methylpyrazine= -0.65(308K) 이였다. 본 실험에서 알코올의 산화반응 과정은 먼저 크로메이트 에스테르 형성과정을 거친 후, 속도결정단계에서 수소화 전이가 일어나는 메카니즘임을 알 수 있었다.

• Carbon letters
• /
• 제22권
• /
• pp.60-69
• /
• 2017

Nitrogen-doped carbon nanosheets with a developed porous structure were prepared from polyurethane foams by hydrothermal carbonization following $ZnCl_2$ chemical activation. Scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, solid state $^{13}C$ nuclear magnetic resonance (NMR) spectra and X-ray photoelectron spectroscopy were used to characterize the nitrogen-doped carbon nanosheet structure and composition. The removal of Cr(VI) by the N-doped carbon nanosheets was investigated. The results showed that the maximum removal capacity for chromium of 188 mg/g was found at pH=2.0 with PHC-Z-3. pH had an important effect on Cr(VI) removal and the optimal pH was 2.0. Moreover, amino groups and carboxyl groups in the nitrogen-doped carbon nanosheet played important roles in Cr(VI) removal, and promoted the reduction of Cr(VI) to Cr(III).

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.694-698
• /
• 2006

A method has been described for the chemical speciation, preconcentration and determination of Cr(III) and Cr(VI) species in filtered tannery waste waters by flame atomic absorption spectrometry using ion-exchange resins. Amberlite IR-120($H^+$) strongly acidic cation exchanger and Amberlite IRA-410($CI ^-$) strongly basic anion exchanger resins were used for the separation and preconcentration of Cr(III) and Cr(VI) species, respectively. Optimum condition for preconcentration and speciation was obtained by testing pH of sample and eluent, flow rates of sample and eluent, amount of resins, volume of sample and eluents, and effect of foreign ions. The recommended method has been successfully applied for the preconcentration and determination of chromium species in the dissolved phase of waste water samples collected from a tannery waste water treatment plant in Kayseri, Turkey. The detection limits achieved were 0.73 $\mu$g/L for Cr(III) and 0.81 $\mu$g/L for Cr(VI). Recovery studies showed 99% for Cr(III) and 98% for Cr(VI), for samples spiked with single species.

• Journal of the Korean Wood Science and Technology
• /
• 제51권5호
• /
• pp.321-333
• /
• 2023

In this study, lignin, a lignocellulosic biomass, was chemically modified to produce polyethyleneimine-grafted lignin (PKL) with maximum hexavalent chromium [Cr(VI)] adsorption capacity. Changes in the physicochemical properties due to the cationization of lignin were confirmed through elemental analysis, Fourier transform infrared spectroscopy, and moisture stability evaluation. Alginate (Alg) beads containing PKL (Alg/PKL) were prepared by incorporating cationic lignin into the Alg matrix to apply the prepared PKL in a batch-type water treatment process. The optimal Alg/lignin mixing ratio was selected to increase the Cr(VI) adsorption capacity and minimize lignin elution from the aqueous system. The selected Alg/PKL beads exhibited an excellent Cr(VI) removal capacity of 478.98 mg/g. Isothermal adsorption and thermodynamic analysis revealed that the Cr(VI) removal behavior of the Alg/PKL beads was similar to that of heterogeneous chemical adsorption. In addition, the bulk adsorbent material in the form of beads exhibited adsorption behavior in three stages: surface adsorption, diffusion, and equilibrium.