• 공업화학
• /
• 제17권5호
• /
• pp.433-442
• /
• 2006

금속표면처리 기술 분야에서 광범위하게 적용되어온 6가 크롬에 의한 부식억제방법은 더 이상 사용할 수 없는 단계에 이르렀다. 전 세계적으로 자동차 산업에 적용되기 시작한 이 6가 크롬사용에 대한 규제는 전자산업을 비롯한 모든 산업에 예외 없이 적용될 것이다. 이에 따라 새로운 부식억제 방법이 절대적으로 필요하며, 3가 크롬을 바탕으로 하는 새로운 부식억제 방법이 그 자리를 대신할 것이다. 따라서 본 총설에서는 6가 크로메이트 대체를 위한 화성코팅에 대한 공정 개발을 위해 현재까지 진행된 과정 및 제안된 3가 크롬화성코팅을 소개하여 획기적인 3가 크로메이트 화성코팅 공정의 확립에 기여하고자 한다.

• 한국표면공학회지
• /
• 제36권2호
• /
• pp.155-160
• /
• 2003

The effect of the temperature, current density and deposit time on hard chromium deposition in trivalent chromium bath was investigated. Cathode current efficiency increased with increasing current density. Increasing bath temperature from $20^{\circ}C$ to $50^{\circ}C$, chromium deposits were produced in higher current density and the maximum current efficiency was increased. At the plating conditions of $40^{\circ}C$, $30A/dm\m^2$, the deposition thickness increased in proportion to increasing electrolysis time The rate is$ 90\mu\textrm{m}$/hrs. for 2 hours. Microhardness of chromium deposits increased with increasing bath temperature and decreasing current density, and it was constant with electrolysis time. All of bath conditions, microstructure of chromium deposits has nodular structure with some cracking pattern and nodule size increased with increasing deposit thickness.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.47-48
• /
• 2011

The effect of solution acidity and organic additives, polyethylene glycol (PEG), on the trivalent chromium electroplating was systematically investigated in the view point of solution stability, electroreduction of trivalent chromium ions and characterization of deposition layer. It was found that, the concentration of fraction chromium complexes in the trivalent chromium bath containing formic acid is strongly depended on pH value. PEG molecules were stable in trivalent chromium bath containing formic acid via studies on electrospray ionization mass spectrometry (ESI-MS) and UV-Vis. However, the presence of PEG molecules decreased the reductive current of hydrogen evolution, increasing of current efficiency higher about 10 % compared with solutions without PEG. Moreover, PEG additives developed the nodular morphology during electroreduction of trivalent chromium ions with the increase of solution acidity and enhanced its current efficiency by maintaining the consumption of complexant, formic acid, at a low speed. In this study, the effect of solution acidity was emphasized important, there, it controlled the formation of complexes in the solution, cathodic film (CF) during deposition, and properties of deposited layer. By electrochemical quartz crystal microbalance (EQCM), studies show that chromium electrodeposition occurs via the formation of intermediate complexes and adsorption on the cathode surface, which hinder the penetration of ions from bulk solution to the cathode surface.

• Bulletin of the Korean Chemical Society
• /
• 제13권6호
• /
• pp.605-612
• /
• 1992

Chromium oxide/zirconia catalysts were prepared by dry impregnation of powdered $Zr(OH)_4$ with ($NH_4$)$_2$CrO$_4$aqueous solution. The characterization of prepared catalysts was performed using FTIR, XPS, XRD and DTA methods, and by the measurement of surface area. The addition of chromium oxide to zirconia shifted the transitions of $ZrO_2$ from amorphous to tetragonal phase and from tetragonal to monoclinic phase to higher temperature due to the strong interaction between chromium oxide and zirconia, and the specific surface area of catalysts increased in proportion to the chromium oxide content. Since the $ZrO_2$ stabilizes supported chromium oxide, chromium oxide was well dispersed on the surface of zirconia, and ${\alpha}$-$Cr_2O_3$ was observed only at the calcination temperature above 1173 K. Upon the addition of only small amount of chromium oxide (1 wt% Cr) to $ZrO_2$, both the acidity and acid strength of catalyst increased remarkably, showing the presence of two kinds of acid sites on the surface of $CrO_x$/$ZrO_4$-Bronsted and Lewis.

• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.475-488
• /
• 1996

The opaque porcelain layer of porcelain-fused-to-metal(PFM) restoration is critical for the success of PFM restoration because it is the first layer placed over the treated alloy. But, the methods of opaquing technique have not been confirmed. Usually, the one layer method and two layer method have been used for the application of opaque porcelain. In the past, alloys with porcelain veneers which have been used successfully have contained various precious metals. Recent increase in the cost of precious metals stimulates considerable interest in nonprecious alloys. Although nickel-chromium alloys and nickel-chromium-beryllium alloys have been widely used, the use of cobalt-chromium alloys would be gradually increased with elimination of any potential risk of nickel-related allergic responses and/or beryllium-related toxic responses. This investigation examined one- and two-layer opaque porcelain applications to determine the effect on the bond strength of titanium added cobalt-chromium metal ceramic alloy. Bond strength of Ceramco II porcelain to titanium added cobalt-chromium alloy(2Dentitan) and gold-platinum-palladium alloy(Degudent H) were evaluated by direct shear bond strength test with Instron universal testing machine. The results were as follows; 1. When the mean shear bond strength of each experimental group were compared in $0.25cm^2$ unit area, the titanium added cobalt-chromium alloy/two layer method exhibited the greatest strength(79.7kg), followed by titanium added cobalt-chromium alloy/one layer method(76.2kg), gold-platinum-palladium alloy/two layer method(71.4kg), gold-platinum-palladium alloy/one layer method(64.2kg). 2. No significant differences in bond strength were recorded between the two opaquing techniques for gold-platinum-palladium alloy and titanium added cobalt-chromium alloy. 3. No significant differences in bond strength were recorded between the gold-platinum-palladium alloy and the titanium added cobalt-chromium alloy.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.105.1-105
• /
• 2003

The Plant growth Promoting rhizobacteria (PGPR), Pseudomonas sp. (A3) and Bacillus sp. (AT33) were isolated from the rhizosphere of Amaranthus blitum collected from soil contaminated with chromium. Both bacterial strains quantitatively reduced hexavalent chromium to trivalent chromium. Pseudomonas sp. broughter greater conversion of Cr6+ in the medium (100％) as compared to Bacillus sp.(62％). Phaseolus mungo seeds inoculated with Pseudomonas sp. or Bacillus sp. were grown under different concentration of chromium. The monitored parameters included elongation of shoot and root, fresh weight, dry weight and concentration of chromium in the shoot and root systems. As compared to non inoculated seedlings those inoculated with A3 and AT33 exhibited better growth.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2003년도 제10차 국제학술회의 및 추계정기 학술발표회
• /
• pp.57-57
• /
• 2003

The plant growth promoting rhizobacteria (PGPR), Pseudomonas sp. (A3) and Bacillus sp. (AT33) were isolated from the rhizosphere of Amaranthus blitum collected from soil contaminated with chromium. Bothbacterial strains quantitatively reduced hexavalent chromium to trivalent chromium. Pseudomonas sp. broughter greater conversion of Cr6+ in the medium (100%) as compared to Bacillus sp.(62%). Phaseolus mungo seeds inoculated with Pseudomonas sp. or Bacillus sp. were grown under different concentration of chromium. The monitoredparameters included elongation of shoot and root, fresh weight, dry weight and concentration of chromium in the shoot and root systems. As compared to non inoculated seedlings those inoculated with A3 and AT33 exhibited better growth.

• 자원환경지질
• /
• 제29권1호
• /
• pp.77-85
• /
• 1996

The vertical concentration profiles of chromium in sediment cores were measured from Lakes Superior, Michigan, and Ontario in an attempt to determine spatial and historical variations. Pre-industrial concentrations of chromium are typical for soils in the Great Lakes region. Only Lakes Ontario and Michigan exhibit anthropogenic enrichments of chromium in the sediments. Sediment profiles in Lakes Ontario and Michigan indicate that the rates of anthropogenic chromium loading to the Great Lakes region are decreasing. Focusing corrected inventories are similar within each lake and those are higher in Lake Ontario than Lake Michigan. The results are interpreted to indicate that there is a small atmospheric component to chromium inputs to the Great Lakes and that the relative importance of this input decreases from Lake Superior to Lake Ontario.

• Journal of Welding and Joining
• /
• 제16권2호
• /
• pp.64-72
• /
• 1998

This study aims a investigating the effect of volume fraction of chromium carbide phase(VFC) of hardfaced iron/chromium alloys on fracture toughness. The alloys were deposited twice on a mild steel plate using self-shielding flux cored arc welding process. In order to examine VFC effect, different VFC (0.28∼0.62) were employed by changing the Cr and C content, while the ratio of Cr/C was fixed in the range of 5.7∼6.6. Fracture toughness was constant as increasing VFC because fracture surface was developed in the eutectic phase which was growing parallel with introduced sharp notch in the hypoeutectic alloys, but fracture toughness did not decreased in spite of increasing volume fraction of coarse primary chromium carbide phase which was easily craced at the low stress because the growth direction of chromium carbide phase were more irregular as increasing VFC in the hypereutectic alloys.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 추계학술발표회초록집
• /
• pp.11-11
• /
• 2003

Electroplated hexavalent chromium coatings have been used in many technical applications since it was invented by G.J. Sargent in 1920. Because of the environmental problems and health risks associated with the use of hexavalent chromium, there has been an extensive search for alternative coatings with properties such as corrosion resistance and wear resistance, at a reasonable cost. However there is no single substitute that meets all the desirable performance characteristics of chromium. Advanced techniques, such as alloy plating, electroless plating, trivalent chromium plating, plasma and thermal spray coating, PVD and ion implantation, have been applied for replacing hexavalent chromium plating.