• 시멘트
• /
• 통권156호
• /
• pp.67-71
• /
• 2002

• 대한치과기공학회지
• /
• 제33권2호
• /
• pp.121-128
• /
• 2011

Purpose: The purpose of this study is to investigate the level of each metal in non-precious metal alloys dental casting, still used even banned for use and trade by the law, for oral health. Methods: Two kinds of metal alloys were analyzed. One was Ticonium 100 for removable prosthesis and the other was Rexillium V for dental porcelain. Two samples of each metal alloy were made in 0.5g, 1.0g, and 1.5g. Total number of samples were 12. Two kinds of lactic acid Solution, pH7 and pH4.6, were injected into each samples. After injection, each samples had been for 21days ${\pm}$ 1 hour in the water tank of which temperature was $37^{\circ}C$. The level of metal was measured in each sample by inductively couplled plasma-atomic emission spectrometer. Results: In both metal alloys, metals, chrome, nickel, beryllium, and molybdenum, were founded. In Ticonium 1000, the highest level of nickel was 2.531ppm in 1.5g pH4.6 sample while the highest level of nickel was 4.062ppm in 1.5g pH4.6 sample of Rexillium V. In chemical composition of these methal alloys, chrome(14~17%) was much more than beryllium(1.95~1.99%) and molybdenum(5.0~9.0%) but berllium and molybdenum were founded more than chrome in samples. Therefore, chrome showed better anti-corrosion than other metal alloys. In both metal alloys, more metals were founded in higher pH level and more mass. Levels of chrome was significantly different in samples of both metal alloys in each pH level(p<0.05). Levels of nickels was significantly different in samples of both metal alloys in each pH level(p<0.05). Conclusion: For oral health, further studies are needed in nickel-chrome metal alloy and cobalt metal alloy of non-beryllium in addittion to beryllium metal alloy and also long-term studies needed in various period and other non-percious metal alloys for dental casting.

• 환경생물
• /
• 제24권1호
• /
• pp.38-45
• /
• 2006

경상북도내의 금속광산, 공장 및 공업지역의 토양의 오염도를 조사하고 중금속 오염토양 중에 분포하는 미생물 flora의 정량적 평가를 위하여 청정지역인 독도토양과 비교한 결과, 일반세균의 경우 $10\sim100$배 낮은 분포율을 나타내었으며, 6가크롬 오염토양 중 곰팡이는 거의 검출되지 많았다. 방선균은 수은 오염토양의 경우 $6.7X10^5\sim7.5X10^7\;cfu\;g^{-1}$, 6가크롬 오염토양 내 방선균 수는 $4.8X10^4\sim5.0X10^5\;cfu\;g^{-1}$이 측정되어 대조구 토양 내 방선균 분포와 비슷한 높은 분포율을 나타내었다. 수은 오염토양 시료를 $HgCl_2$ 50ppm과 100ppm을 각각 첨가한 배지에 접종하여 방선균수를 측정한 결과 대조구 토양에 비해 10배 이상의 높은 수를 확인하였다. 수은 및 6가크롬의 오염토양으로부터 분리된 방선균 150 균주에 대해 항균력을 검토한 결과 31균주가 양성반응을 나타내었다. 이들 방선균 중 강한 항균활성을 나타낼 10균주를 선발하여 계통학적 특성을 검토한 결과 Streptomyces 속, Saccharopolyspora 속, 그리고 Nocardioides 속에 속하는 3개의 계통군으로 분류되었다. 이들 분리균주중에는 기지 미생물종과 97% 이하의 낮은 상동성을 나타내는 신규미생물도 다수 포함되어 있었다. 이상의 결과로부터, 본 연구에서 조사된 수은 및 6가크롬 오염토양내 중금속 내성 및 항균활성을 갖는 방선균이 높게 분포해 있음이 확인되어, 난분해성 화합물을 포함한 다양한 구조의 유해 독성물질의 정균작용으로 인한 중금속 오염토양 내 환경의 복원이 효율적으로 이루어 질 수 있을 것으로 기대되었다.

• 대한치과기공학회지
• /
• 제28권2호
• /
• pp.355-366
• /
• 2006

The purpose of this study was to determine if repeated casting has a detrimental effect on the corrosion behavior of nickel-chrome casting alloys. The X-ray diffraction analysis, vickers hardness test, SEM, EDX and corrosion test were performed to determine the effects of recasting on chemical composition, microstructure, physical property, castability and corrosion behavior of nickel-chrome casting alloys. The X-ray diffraction analysis results for the cast and recast specimens of the VeraBond and the Rexillium V showed that major crystal phase contained nickel-chrome compounds, Nickel carbide and Chrome carbide. Microstructure analysis results for the cast and recast specimens of the VeraBond and the Rexillium V showed recasting has no effect on microstructure. EDX analysis results indicated the percentage of the main component nickel(Ni) in the specimens of the VeraBond showed a tendency to increase with recasting, but those of other components Carbon(C) showed a tendency to decrease with recasting, Chrome(Cr), Silicon(Si), Aluminium(Al) and molybdenum(Mo) showed no changes in the percentage. The percentage of the main component nickel(Ni) in the specimens of the Rexillium V showed a tendency to increase with recasting, but those of other components silicon(Si), carbon(C) and molybdenum(Mo) showed a tendency to decrease with recasting, chrome(Cr) and aluminium(Al) showed no changes in the percentage. The vickers hardness results for the cast and recast specimens of the VeraBond and the Rexillium V showed a tendency to decrease with recasting, but the differences for the first to fifth cast were not statistically significant. The castability results for the cast and recast specimens of the VeraBond and the Rexillium V showed a tendency to decrease with recasting, but the differences for the first to fifth cast were not statistically significant. The cast and recast specimens of the VeraBond and the Rexillium V showed no differences in the corrosion resistance. The results indicate that the VeraBond and the Rexillium V can be safely recast.

• Korean Chemical Engineering Research
• /
• 제56권1호
• /
• pp.24-28
• /
• 2018

산화환원흐름전지(Redox Flow Battery, RFB)는 대용량 에너지 저장장치로 바나듐 산화환원흐름전지가 대표적인 RFB인데, VRFB는 고가인 점이 문제다. 철-크롬RFB는 저가의 활물질을 사용해 경제적인 점이 장점인데, 성능이 낮은 점이 해결해야할 과제다. 낮은 성능의 한 원인이 활물질의 크로스오버인데, 본 연구에서 철과 크롬 이온의 Nafion 막 크로스오버 및 Nafion 막의 안정성에 대해 실험하였다. 철과 크롬이온의 Nafion 막 투과도는 각각 $5.5{\times}10^{-5}$, $6.0{\times}10^{-5}cm^2/min$ 이었다. Nafion 막에서 바나듐 이온의 투과도 $2.9{\times}10^{-6}cm^2/min$ 보다 18.9~20.7배 높아 철과 크롬 이온의 Nafion 막 크로스오버가 성능 저하의 한 원인임을 보였다. 온도 증가에 따라 크로스오버가 급증(활성화 에너지 38.8 kJ/mol)하므로 낮은 온도에서 구동하는 것이 크로스오버에 의한 성능감소를 저하시키는 방법임을 나타냈다. Nafion막은 3M HCl용액에서 비교적 안정적이었다.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2005년도 춘계 국제심포지엄 및 학술대회
• /
• pp.140-140
• /
• 2005

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.74-78
• /
• 1997

This study was performed to obtain the basic data of the effect of antimicrobic finishing on chrome-tanned leather for apparel. This study was to examine the effect of conditions of antimicrobic finishing on content of antimicrobic agents in the specimen by analysis and on the antimicrobic activity of specimens by means of shake flask test. The optimum conditions of antimicrobic finishing were found to be ; the concentration of Si-QAC-0.5%(o.w.f.), treating time-30minute, and drying method-air drying.

• 좋은식품
• /
• 통권214호
• /
• pp.113-115
• /
• 2010

• 시멘트 심포지엄
• /
• 20호
• /
• pp.65-72
• /
• 1992

• 시멘트 심포지엄
• /
• 6호
• /
• pp.65-73
• /
• 1978