• Title/Summary/Keyword: Chromaticity value

Search Result 220, Processing Time 0.027 seconds

Quality Characteristics of the Yanggeng made by Crataegi fructus Extracts (산사추출액 첨가 양갱의 품질특성)

  • Kim, Seong-Su
    • Culinary science and hospitality research
    • /
    • v.21 no.1
    • /
    • pp.225-234
    • /
    • 2015
  • The objective of this study is to investigate the quality characteristics of yanggeng prepared with different amounts of Crataegi fructus extracts(CFE; 0, 5, 10, 15, 20). Increasing the amount of CFE in the yanggeng tended to increased the moisture and acidity, while it decreased the level of pH. In chromaticity determination, the values of lightness(L) and yellowness(b) showed a decrease. However, the value of redness(a) increased by increasing levels of CFE. In addition, hardness increased by increasing levels of CFE. Although regarding texture profile analysis, hardness and springiness of yanggeng were increased, adhesiveness and cohesiveness of yanggeng were decreased. Cohesiveness shown similar result compared to the control and CFE added treatments. The sensory evaluation indicated that CFE 15 showed the best preference in color, taste, texture, flavor, and overall acceptance. Based on these results, 15% should be recommended as a optimum level of CFE to be added for the preparation of yanggeng. And these results suggest that CFE may be a useful ingredient in yanggeng for improvement of the quality.

Effect of Dye-Degrading Microbes' Augmentation on Microbial Ecosystem of the Fluidizing Media and Color Treatment in a Pilot Plant (염료 분해균 증대를 통한 Pilot Plant에서의 담체 내 미생물 생태와 색도처리에 미치는 영향)

  • Kim, Jung-Tae;Lee, Geon;Park, Do-Hyeon;Kang, Kyeong-Hwan;Kim, Joong-Kyun;Lee, Sang-Joon
    • Journal of Environmental Science International
    • /
    • v.23 no.4
    • /
    • pp.681-695
    • /
    • 2014
  • In a pilot-scale dyeing wastewater treatment using two-type fluidizing media, each thickness of biofilm was 15 and 30 ${\mu}m$, respectively. The numbers of protozoa inhabited in small-size (PEMT A) and big-size (PEMT B) media were $7.5{\times}10^4$ and $1.25{\times}10^5$ cells/ml, respectively, and dominant species were Entosiphon sulcatus var sulcatus in PEMT A and Chlamydomonas reinhardtii in PEMT B, respectively. Flask experiments using the two media revealed that the percentages of color removal were 25.8% in PEMT A and 27.1% in PEMT B after 72-h cultivation, indicating the necessity of bioaugmentation. Experiments for bioaugmentation effect on color removal were carried out in the pilot-scale treatment for 75 d by three-step operation under the control of wastewater loading rate and microbial input rate. Dye degradation occurred mainly in the second reaction tank, and the attachment of augmented dye-degrading microorganisms to media took at least 35 d. Final value of chromaticity in effluent was 227, meeting the required standard. Therefore bioaugmentation onto media was good for color treatment. In summary, thickness of biofilm formed on the media depended upon the size of media, resulting in different ecosystem inside the media. Hence, this affected microbial community and color treatment further. Accordingly, the reduction of operation cost is expected by efficient color-treatment process using bioaugmented media.

Study on the Emission Properties of Visible Light Source using Energy Transfer (에너지전달을 이용한 가시광 Light Source의 발광특성에 관한 연구)

  • Gu, Hal-Bon;Kim, Ju-Seung;Kim, Jong-Uk
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.17 no.11
    • /
    • pp.1212-1217
    • /
    • 2004
  • Red organic electroluminescent (EL) devices based on tris(8-hydroxyquinorine aluminum) (Alq$_3$) doped with red emissive materials, 4-(dicyanomethylene)-2-t-butyl -6-(l,1,7,7-tetramethyljulolidyl-9-enyl)4H-pyran (DCJTB). poly(3-hexylthiophene) (P3HT). rubrene and 4-dicyanomethylene-2-methyl-6[2-(2,3.6.7-tetrahydro-lH,5H-benzo-[i,j]quinolizin-8yl)vinyl]-4H-pyran (DCM2) were fabricated for applying to the red light source, The photoluminescence (pL) intensities of red emissive materials doped in Alq$_3$ are limited by the concentration quenching with increasing the doping ratio and the doping concentration of DCJTB, DCM2, P3HT and rubrene measured at the maximum intensity showed 5, 1, 0.5 and 2 wt%, respectively. Time-resolved PL dynamic results showed that the PL lifetime of red emissive materials doped in Alq$_3$ were increased more than the value of material itself. It means that the efficient energy transfer occurred in the mixed state and Alq$_3$ is a suitable host materials for red emissive materials, The device which was used DCJTB as a dopant achieved the best result of the maximum luminance of 594 cd/$m^2$ at 15 V and showed the chromaticity coordinates of x=0,624, y=0,371.

Changes of Physical and Chemical Properties for Making Raw Materials and Reproductions According to Manufacturing Stages in Traditional Korean White Porcelain

  • Kim, Du Hyeon;Jeong, Ji Youn;Oh, Eun Jeong;Han, Min Su
    • Journal of Conservation Science
    • /
    • v.38 no.4
    • /
    • pp.301-313
    • /
    • 2022
  • We made a Korean white porcelain or Joseon Baekja jar and based on the raw materials used and reproductions of each stage, we aimed to compare and analyze the physicochemical changes of the raw materials such as clay at each manufacturing stage, as well as identify the characteristics and correlations. Although the basic main components of clay and glaze material are similar, their texture becomes denser in the process of bisque firing pottery (Chobeol-pyeon) and glaze firing pottery (Jaebeol-pyeon), and we confirmed that in addition to the tendency of increasing vitrification, low-temperature minerals such as mica and illite gradually disappeared, while high-temperature minerals such as cristobalite were newly created. This phenomenon has also been verified by the rapid decrease in absorption rate while the change in specific gravity was small. In addition, the color was greatly affected by the firing atmosphere, and the yellow-red chromaticity of the raw materials was higher during bisque firing but showed a rapidly decreasing characteristic during glaze firing. The value of magnetic susceptibility, which is related to iron (Fe) component, showed a tendency to decrease in glaze firing pottery. CT images were confirmed as a method that can indirectly estimate the change in the material properties of the object step-by-step for the entire object. In conclusion, the study of manufacturing stages of reproduction can provide basic data for scientific research on the estimation of porcelain and pottery making technology and changes in raw materials.

Preparation of Coating Agent for Fresh-Cut Fruit on Cake and Its Storage Characteristics (케이크용 신선편의 과일 코팅제의 제조 및 저장 특성)

  • Park, Jung-Eun;Yeon, Soo-Ji;Kim, Dong-Ho;Park, Yeo-Jin;Jang, Keum-Il
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.42 no.12
    • /
    • pp.2019-2027
    • /
    • 2013
  • In this study, we tried to develop a coating agent for the fresh-cut fruits used in cakes. First, the coating agent mixing ratios of sugar, pectin, sodium alginate, carrageenan, xanthan gum, vitamin C, and purified water were selected to be 55, 2, 2, 0.04, 0.1, 0.05, and 40.81% (w/w), respectively. In a freeze-thaw stability of the coating agent, the viscosity remained constant for 3 cycles of freezing and thawing repetition process, but showed a slightly decreasing trend in the 4th repetition process (P<0.05). On the other hand, the sugar content, pH, and chromaticity remained constant even in the 4th repetition process. Pineapple coated with the coating agent had smaller weight loss, hardness changes, and total bacteria distribution compared to the uncoated pineapple (P<0.05). In the chromaticity, both of the two pineapples experienced browning with increasing storage duration, as L value decreases and b value increases. However, when the color difference was compared, the progress of browning for the uncoated pineapple was faster than the coated pineapple. Also, the progress of browning at $4^{\circ}C$ was found to be slower than the progress of browning at $25^{\circ}C$. Therefore, the storage stability of the fresh-cut fruits could be improved by coating the fresh-cut fruits for cakes with the coating agent and storing at a low temperature, which would contribute to extending the shelf-life of cakes.

A Study on Standardizing a Recipe for Kiwi Salad Dressing (키위 드레싱 제조법의 표준화 연구)

  • 김미향;이연정
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.12 no.5
    • /
    • pp.407-414
    • /
    • 2002
  • This study was carried out to develop a kiwi dressing which was lower in calories and a more beautiful color by using Kiwi rather than mayonnaise. This study was aimed to standardize a recipe for Kiwi dressing using sensory characteristics as well as to examine the changes of pH and chromaticity by the storage period. Results of this study were as follows: from the results of sensory evaluation on kiwi dressing using different kinds of oil, the pure olive oil showed the higher scores than the corn oil in the taste, fresh-sour taste and overall palatability. Sensory evaluation scores of kiwi dressings with various amounts of oil were not significantly different, which suggested that use of kiwi for a dressing was a good way to develop a low calorie dressing because the addition of 32% (360g) oil in kiwi dressing could replace the 75% oil used in mayonnaise without my significant differences in the overall palatability. From the result of sensory evaluation on kiwi dressing with different kinds of acid, lemon juice showed the higher scores than apple vinegar in flavor. The kiwi dressing showed the highest scores in the overall palatability and fresh-sour taste when 12% (60g) onion juice was added and in as well as flavor, taste and the overall palatability at 10 days of storage. The pH values of kiwi dressing Increased significantly in proportion to the storage period (p<0.001), and showed the highest pH value of 2.99 at 17 days of storage. Lightness in color showed the lowest value at 3 days of storage and the greenness of kiwi dressing increased gradually, but the yellowness decreased significantly in proportion to the storage period(p<0.001).

  • PDF

Chromaticity and Brown Pigment Patterns of Soy Sauce and UHYUKJANG, Korean Traditional Fermented Soy Sauce (간장과 어육장의 색도 및 갈색색소 패턴)

  • Kim, Ji-Sang;Moon, Gap-Soon;Lee, Young-Soon
    • Korean journal of food and cookery science
    • /
    • v.22 no.5 s.95
    • /
    • pp.642-649
    • /
    • 2006
  • The browning of soy sauce is caused by the reaction of amino-carbonyl between amino-compounds and reducing sugar. Only a few studies have investigated the formation of melanoidins in UHYUKJANG. The objectives of this study were to analyze the brown pigment of UHYUKJANG and to investigate the characteristics of UHYUKJANG in comparison with soy sauce and model melanoidins. The samples were ripened for 0, 60, 120, 180, 240, 300 and 360 days at 4$^{\circ}C$ and 20$^{\circ}C$. The pH, absorbance at 420 nm absorbance ratio of 400 to 500 nm and UV-VIS spectra as an index of color intensity were measured. Additionally, L, a and b values of the samples and the amount of 3-Deoxyglucosone(3DG) in the samples were measured. The pH of both soy sauce (from 6.26 to 5.52) and UHYUKJANG (from 6.13 to 5.11) rapidly decreased during the first 60 days of aging and was also affected by storage temperature. The absorbance of samples at 420 nm increased during the aging process, reaching its maximum after 180 days, regardless of sample and temperature. On the other hand, the intensity of brown color in the samples increased with increasing aging period according to the results of absorbance ratio (soy sauce: 1.37 to 5.29, UHYUKJANG: 1.37 to 5.02). The L value of soy sauce increased during the aging process and was maximized after 240 days at 4$^{\circ}C$ and 180 days at 20$^{\circ}C$, but decreased thereafter. There was no significant difference in L value of UHYUKJANG, regardless of aging period and temperature. On the other hand, the b value did not reveal any significant change during aging, but the a value increased until 120 days of aging in the other samples except for UHYUKJANG at 20$^{\circ}C$. The average amount of 3DG separated from soy sauce was 5.65 mg%, and from UHYUKJANG was 3.74 mg%. These results indicated that the browning of UHYUKJANG was also caused by melanoidins produced by the reaction of amino-carbonyl during the fermentation process.

Composition and Physicochemical Properties of Unripe Korean Peaches According to Cultivars (국내산 복숭아 유과의 품종별 성분 분석 및 품질특성)

  • Kim, Da-Mi;Kim, Kyung-Hee;Choi, In-Ja;Yook, Hong-Sun
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.41 no.2
    • /
    • pp.221-226
    • /
    • 2012
  • For the investigation of a possibility as a useful functional material, 6 cultivars (Takinosawa Gold, Kawanakawase Hakuto, Madoka, Yumefuji, Nagasawa Hakuho, Hong Bak) of Prunus persica L. Batsch were studied at unripe stage to determine the physicochemical properties and chemical compositions. The cultivars were picked in late May, and all samples were analyzed for external properties, physicochemical properties, pH, Brix value, Hunter's color value, hardness, vitamin C, and reducing sugar. The size of the fruit from all six cultivars was compared, and it was determined that cultivars, fruit from Madoka was the largest, while that from Yumefuji was the smallest. Comparing fresh weight, the fruit from Yumefuji was lowest in moisture contents (89.13~89.96%), and that from Nagasawa Hakuho had significantly higher crude protein (1.02~1.62%). The contents of crude lipids (0.18~0.23%) and carbohydrates (8.00~9.35%) were not significantly different between cultivars and Madoka included higher crude ash contents (0.32~0.69%) than other cultivars. The pH of 6 cultivars from unripe peaches were significantly higher from Kawanakawase Hakuto, and the Brix value was also highest from Kawanakawase Hakuto, followed by Yumefuji, Madoka, Nagasawa Hakuho, Takinosawa Gold, and Hong Bak. In chromaticity, the L value, the indicator of brightness, was significantly higher in fruit from Nagasawa Hakuho. The a value, the indicator of redness, was the highest with Hong Bak and overall lower than -5. The b value, the indicator of yellowness, was the highest in fruit from Madoka and ranged from 16.51 to 18.33. In physical characteristics, the hardness of the unripe peaches was the highest in fruit from Hong Bak, and overall, white peaches have a higher hardness value than yellow peaches. The vitamin C content of the fruit didn't show any significant differences between cultivars, and the reducing sugar showed a higher percent than 6.34% in fruit from all cultivars. These results suggest that unripe peaches were commensurate with the development of natural pigment and as a functional foods.

Quality Properties of Conger Eel (Conger myriaster) Oils Extracted by Supercritical Carbon Dioxide and Conventional Methods (초임계 이산화탄소 및 유기용매를 이용하여 추출된 붕장어(Conger myriaster) 오일의 품질특성)

  • Park, Jin-Seok;Cho, Yeon-Jin;Jeong, Yu-Rin;Chun, Byung-Soo
    • Clean Technology
    • /
    • v.25 no.4
    • /
    • pp.275-282
    • /
    • 2019
  • In this study, the extraction of Conger myriaster oil by using supercritical carbon dioxide (SC-CO2) and organic solvent was investigated. The extraction conditions conducted for SC-CO2 varied for pressure (25, 30 MPa) and temperature (45, 55 ℃), while the SC-CO2 flow rate was kept constant during the experiment (27 g min-1) and hexane was used as a conventional organic solvent. The extraction yield indicated that the best extraction condition would be SC-CO2 at 55 ℃ and 30 MPa, resulting in the highest yield of 37.73 ± 0.14%. The oils were characterized for their fatty acid (FAs) composition using gas chromatography, while it was revealed that the major FAs were mystric acid, palmitoleic acid, oleic acid, electroosapentaenoic acid (EPA), and docosahexaenoic acid (DHA). The oxidation stability of the extracted C. myriaster oil was evaluated by measuring the acid value, peroxide value, and free fatty acid. The best oxidative stability was obtained from SC-CO2 extracted oil at 30 MPa and 55 ℃. There was a significant difference in the color properties of the SC-CO2 and hexane extracted oils, with the SC-CO2 extracted oil showing better chromaticity than the oil extracted using hexane. Extracting oils from C. myriaster with SC-CO2 could bring better economic benefits than using organic solvents. When supercritical carbon dioxide was used, there was no post-treatment process; thus, it was confirmed that this is a more environmentally friendly oil extraction method.

The Physicochemical and Quality Properties of the Bread Added with Soy Fiber Powder (콩식이섬유를 첨가한 식빵의 이화학적 및 품질 특성)

  • Lee, Myung-Ho;Byun, Jong-Beom;Kim, Sun-Kyung;Choi, Young-Sim
    • Culinary science and hospitality research
    • /
    • v.18 no.1
    • /
    • pp.1-14
    • /
    • 2012
  • This study examines the physiochemical and quality properties of the bread added with soy fiber powder to promote the intake of soy fiber. For this study, the powder for making bread was mixed with soy fiber, wheat flour and SF-1450 and SF-1260 at the ratio of 0~12% each. The ratios of the edible fiber contained in the soy fiber power samples were 72.0% in the SF-1450 sample and 67.8% in the SF-1260 sample. The mixograph characteristics tended to be conspicuons in proportion to the amount of the soy fiber added at midline peak height, width at peak and, width at 8.00. The specific volume of the bread tended to decrease significantly as the amount of the soy fiber increased from 2 to 12%. In terms of crust chromaticity change, L-value increased more significantly in the samples added with 4 to 12% than the control. For a-value, SF-1450 in the samples with 6 to 12% and SF-1260 in the samples with 8 to 12% more significantly decreased than the control. For such characteristics of texture as hardness, SF-1450 in the samples with 10 to 12% and SF-1260 in the samples with 6 to 12% increased more than the control. As discussed above, the sensual characteristics of the white pan bread with soy fiber added tended to be worse as the amount of the additive increased, compared with the control samples. Summing up the results of the physico-chemical analysis and the overall acceptability, those samples with 2~4% of SF-1450 and 2% of SF-1260 were found excellent.

  • PDF