• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.243-243
• /
• 2017

Leaf colors of rice can be used to identify stress level due to its adaptation to environmental change. For most leaves green-related colors are sourced from chlorophyll a and b. For most leaves green-related colors are consisted of chlorophyll a and b. Chlorophyll concentration is normally measured using a spectrophotometer in laboratory. In some remote observation fields, it is impossible to collect the leaves, preserve them, and bring them to laboratory to measure their chlorophyll content. The measurement of chlorophyll content is observed through its color. Using CIE chromaticity diagram leaf color information in RGB is transformed into wavelength (in nm). Pheophytin contents were also analyzed in 95% ethanol extracts. In the process of leaf development of rice young seedling, both pigments were compared. Leaf samples from different rice seedling bed is taken, their colors and RGB values are recorded using Photoshop Image Analysis. SPAD-502 values were also measured. The chlorophyll and Pheophytin contents were fully estimated by ${\rightthreetimes}_{avg}$ on CIE chromaticity diagram.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.90-96
• /
• 1996

Optical conditions of a reflective multicolor STM-LCD based on the electrical control of birefrignece are analyzed on the CIE chromaticity diagram. The luminance and the area of the locus on the cIE chromaticity diagram are the two factors to be considered in the design of an LC cell to display white, red, green, and blue. The characteristics of a test cell agrees well with numerical simulation. A completed 320$\times$240 module is addressed by a designed PWM driving circuit.

• Journal of the Optical Society of Korea
• /
• v.16 no.4
• /
• pp.449-456
• /
• 2012

For two well-known modulation methods, stepwise current modulation (SCM) and pulse width modulation (PWM), the effects of driving current modulation conditions on chromaticity were experimentally investigated in a white LED lighting system. For the experimental implementation of both SCM and PWM, a white LED lighting was fabricated using phosphor converted (PC) white light emitting diodes (LEDs) and a driving circuit module was developed. By using them, the variations of illuminance, color coordinates, and spectrum were evaluated under various forward current conditions. Through the analysis in color coordinates, yellow shift in SCM and blue shift in PWM were observed on chromaticity diagrams with increasing average driving current. In addition, in order to analyze color deviation quantitatively, color distance before and after current increase, and the correlated color temperature (CCT) were calculated. As a result, for the white LED lighting in both modulation conditions, the maximum difference in the calculated CCT was obtained close to 1000 K. It means that careful consideration is required to be taken in the design of illumination systems to avoid serious problems such industrial accidents.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.210-216
• /
• 1997

A study to select ground colors of Fuji apple for maturity index which are needed to standardize grading of the apples is presented. Two extreme colors of immature and fully mature Fuji and Zonagold apples produced in Korea were determined. Various ground colors of Fuji apple between the two extreme colors were collected and classified by human vision and colors of Fuji apple for maturity index were selected from the classification. Coordinates of the selected colors in xy chromaticity diagram were determined by spectrophotometers to define them in a standard coordinate system. Coordinates of the colors in r-g chromaticity diagram using a color machine vision system were also determined to use the colors in apple grading by the machine vision system. Grading Fuji apples using the machine vision system was performed and result of the grading was compared with Ending results of human vision and colorimeter. The comparison was performed with the same Fuji apple samples and showed 65% md 75% of same grades, respectively, as the grades determined by the machine vision system. Differences of fading performance between the compared three grading methods were explained as mainly because of the differences of observation area of the grading methods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.264-264
• /
• 2009

The sensitivity lighting of pendant type used Micro-controller AVR, embodiment method for Munsell chromaticity diagram system and adoption method for light source lens respectively. About a plan design of light fixture, LED circuit designed flow chart of circuits and LED driver of organizations in electron device. For used Solidworks soft ware program, LED light source must take a heat shink part and LED light fixture module for sensitivity lighting of pendant type into considerations

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.961-965
• /
• 2006

White organic LED spectrum for lighting and displaying should be designed for high luminous efficiency as well as good chromaticity coordinate, pleasant correlated color temperature and color rendering. A program based on Matlab was made to make these calculations convenient. The chromaticity coordinate and luminous efficiency was calculated according to the CIE 1931 colorimetric system, while the correlated color temperature(CCT) was calculated based on CIE 1960 UCS diagram. The color rendering characteristics were evaluated according to the CIE Color Rendering Index (CRI), using Ra, Ri and ${\bigtriangleup}E$ from the 14 color samples defined in CIE13.3.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.1 s.307
• /
• pp.45-54
• /
• 2006

This paper proposed color matching technique, including display characterization, chromatic adaptation model, and gamut mapping and extension, to generate consistent colors for the same input signal in each display device. It is necessary to characterize the relationship between input and output colors for display device, to apply chromatic adaptation model considering the difference of reference white, and to compensate for the gamut which display devices can represent for reproducing consistent colors on DTV display devices. In this paper, 9 channel-independent GOG model, which is improved from conventional 3 channel GOG(gain, offset gamma) model, is used to consider channel interaction and enhance the modeling accuracy. Then, the input images have to be adjusted to compensate for the limited gamut of each display device. We proposed the gamut mapping and extension method, preserving lightness and hue of an original image and enhancing the saturation of an original image in xy chromaticity diagram. Since the hmm visual system is more sensitive to lightness and hue, these values are maintained as the values of input signal, and the enhancement of saturation is changed to the ratio of input and output gamut. Also the xy chromaticity diagram is effective to reduce the complexity of establishing gamut boundary and the process of reproducing moving-pictures in DTV display devices. As a result, reproducing accurate colors can be implemented when the proposed method is applied to LCD and PDP display devices

• Korean Journal of Materials Research
• /
• v.20 no.10
• /
• pp.524-534
• /
• 2010

Glass was fabricated using refused coal ore obtained from the Dogye coal mine in Samcheok. We additionally used soda ash and calcium carbonate to make a glass with the chemical composition of soda-lime glass, and we also used white, brown, and green glass cullet to make various kinds of colored glass. Transparent glass was fabricated by melting batch materials including refused coal ore at $1550^{\circ}C$ for 1 hr in an electrical furnace. The light transmittance and color chromaticity were measured by a UV/VIS/NIR spectrometer. Transparent glass with a light transmittance of over 80% was fabricated using normal refused coal ore and white glass cullet. Various kinds of colored glass with a light transmittance of 30-80% were fabricated using refused coal ore and brown or green glass cullet. The light transmittance of the mixed color glass samples, fabricated using normal refused coal ore and brown glass cullet and green glass cullet, indicated 30-47%, a relatively low value, in the condition of a cullet ratio of 20-50%. The characteristics of the color chromaticity of the glass samples were indicated in a chromaticity diagram by x-coordinates, y-coordinates, Y (lightness). The values of x-coordinates and y-coordinates were moved with a regular directional property according to the kind and amount of glass cullet. Therefore, we concluded that refused coal ore can be used for raw materials of color glass products like art glass and glass tile.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3427-3430
• /
• 2010

• Korean Journal of Human Ecology
• /
• v.15 no.2
• /
• pp.283-292
• /
• 2006

The purpose of this study is to analyze and compare the color characteristics of preferred summer clothing textiles, such as shirts, blouse, slacks and skirt. 109 male and female college students evaluated the preference to clothing textiles in previous research and top 10 kinds of textiles were chosen for each clothing item. To analyze the color characteristics of preferred textiles, spectral data were measured with spectrophotometer. By the results, color and color tone, value of L, a, b according to clothing item and season were compared. Chromaticity diagram was drawn, too. The results of this study are as following: 1. Color characteristics of shirts textile college student preferred for summer was PB color and p tone. The textile, in general, represented simple color that is close to achromatic color with light and soft shade. 2. The most preferred color of blouse textiles was G color and It, d tone. The color characteristics of blouse textiles represented stronger and more brilliant than those of shirts. 3. For slacks, colors of preferred summer textiles were mostly B, YR color and p, It.g, dk tone. Therefore, preferred textiles for slacks represented simple bluish or brownish color that is close to achromatic color with light or dark shade. 4. The most preferred color of skirt textiles were Y, R color and It tone. Skirt textiles had various colors compared to slacks. 5. College students generally prefer simple cold color that is close to achromatic color, because shirts and slacks have high frequency of wearing. In color tone, light and soft tone were preferred for shirts, and for slacks, they preferred light or dark tone. Comparatively, blouse and skirt which have low frequency of wearing represented various colors which contain more brilliant and stronger toned warm colors. 6. By the result of analyzing L, a, b value, shirts and blouse textiles showed higher L value than those of slacks and skirt. The textiles preferred by college students were generally close to achromatic color, because values of a, b were very low. This was confirmed with the result of chromaticity diagram. 7. In pattern of preferred textiles, solid textile were preferred mostly for shirt, blouse, skirt and slacks, and stripe pattern was preferred secondly.