• Korean Journal of Microbiology
• /
• v.24 no.2
• /
• pp.141-146
• /
• 1986

To find the role of polyphenol oxidase in lignin biodegradation, chracteristics of extracellular polyphenol oxidase activity from Lentinus edodes JA01 was investigated. Polyphenol oxidase had its optimum activity at pH 4.5 and $45^{\circ}C$ respectively. Also, the enzyme was very unstable in various pHs and comparatively heat stable up to $60^{\circ}C$. In $lignosulfonate-NH_4$ salts medium, the growth rate of L.edodes JA 01 was relatively slow and polyphenol oxidase activity appeared 2 and 14 days after inoculation. No significant relationships were found between polyphenol oxidase activity and the amounts of lignosulfonate present in the culture medium.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.473-476
• /
• 2005

Silica fume has merits of filling the voids, enhancement of reheological chracteristics, prduction of secondary hydrates by pozzolanic reaction in reactive powder concretes. However silica fume has been imported in high-cost in domestic industry, we need to investigate replaceable material in stead of silica fume in a view of economy Therefore, in this paper, in order to investigation replacement of silica fume in ultra-high strength SFRCC we used another mineral admixtures like that fly-ash, blast slag.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.5
• /
• pp.199-204
• /
• 2002

In order to recognize the deterioration of insulation system by partial discharge (PD), the characteristics of PD patterns which are occurring at the interface between epoxy and rubber materials in extra high voltage cable joints, have been investigated. The artificial defects such as voids, metal particles, insulation fiber and water impregnated insulation fiber are planted between the interfaces. A high frequency partial discharge detection system was used for measuring PD signals. An analysis of the PD patterns is focused on the shape of PD pattern, phase, width and time-dependence for each artificial defect. The PD Patterns in each defect show the different behaviors and it is suggested that the precise discrimination of PD patterns could be used for the diagnosis of deterioration in the insulation systems.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.962-964
• /
• 2004

The plunger speed of solenoid actuator is affected by mass of plunger, magnetic motive force, inductance, and return spring. These factors are not independent but related with each other according to design characteristics of solenoid actuator. So, it is impossible to change the designed value for the purpose of increasing plunger speed. In this study, we have analyzed the characteristics of high-speed solenoid actuator having a non-magnetic ring which plays a role to concentrate the effective magnetic flux into plunger. For more detailed analysis, we have induced characteristic equations and performed FEM analysis and simulation for dynamic characteristics of plunger, and proved the propriety of these by experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1534-1541
• /
• 2000

Wavelength tunable fiber ring laser can be tuned by causing a resonance on the optical path having the least loss which is controlled by a polarization adjustment. It is observed that lasing wavelengths having 1 nm FSR(Free Spectral Range) can be tuned over the range of 1540-1560 nm when a polarization controller and an intra-cavit polarizer with 1.5 mm air gap are adjusted. The characteristics of wavelength shift in the laser output are analyzed by introducing an optical path modeling and the concept of a birefringence loss.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.131-137
• /
• 2003

We have performed computer simulation to obtain electro-optic chracteristics of reflective liquid crystal display (LCD) using wide viewing angle LC mode, fringe field switching(FFS). Unlike other reflective LCD modes, in the FFS mode, the LC director in plance so an application to reflective display consisted of polarizer, LC layer and reflector is possible. when an incident light is 550mm, the optimal cell retardation value is 0.1365${\mu}$m and the efficiency of reflectivity is high over 90% with very little wavelength dispersion. Further, we have studied a new reflective display with polarizer, optical compensation film with half plate, LC plus reflector. The display with optimized cell parameters shows high contrast ratio (CR) over 130 with high light efficiency over 90% at normal direction and the CR greater than 5 exists over 60$^{\circ}$ of polar angle in all directions.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.4
• /
• pp.353-360
• /
• 2000

The purpose of this research is to find the fundamental data for the design and optimum operation condition for the disk atomization comparing the atomization characteristics of the modified straight vane type disk atomizer and the cup type atomizer widely used in the field of spray dry. First, the experimental comparison of the characteristics of $Na_2SO_4$ atomization has been carried out using the cup type disk atomizer and the three kinds of vane type atomization designed specially for the experiment. After the comparison of the experimental data of the $Na_2SO_4$ and raw milk have been conducted using vane type atomizer.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.128-133
• /
• 1997

Due to their high strength and good wear resistance, nitro-carburizing materials have been used for many machine components. However, the nitro-carburizing materials are found to have one disadvantage ; that is, their strength and fatigue life show larger scatter than those of non-heated metals. In this paper, therfore, the statistical chracteristics of non-heated and nitro-carburized specimens for SCM415 are investi- gated under two different of stress levels 1.15 .sigma. /sub .omega. / .leq. / .sigma. / sub .alpha. / .leq. / 1.25 .sigma. /sub .omega. /. Seven specimens at each stress level are tested by using rotating bending fatigue tester. The relation between a crack length and fatigue cycles can be arranged for Weibull distribution, and S-N curve using 95% reliability function is obtalined for nitro-carburized specimen.

• Korean Journal of Plant Resources
• /
• v.9 no.2
• /
• pp.177-181
• /
• 1996

This study was carried out to obtain basic data for technical inprovement about cultivation according to micrometerological changes under various mulching materials in Dendropanox morbifera LEV. The results are summarized as follows. Transparent polyethylene film and black polyethylene film mulching materials increased the soil porosity and reduced change of the soil moisture content. The rate of missing plant during overwinter increased in the control plot. Growth of Dendropanox morbifera LEV, was accelerated by transparent polyethylene film and black polyethylene film mulched.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.37-42
• /
• 1997

Generation and physico-chemical characteristics of municipal solid wastes are very important for sanitary management. However, that has not been investigated so far especially in chunchon. And so, we tried to examine many things in detail. It was resulted that density was $90{\sim}94kg/m^3$ in school and office zone and $290{\sim}298kg/m^3$ in apartment and market place. The compositional weight fraction was food, 40~54%, paper, 14~18%, vinyl and prastic, 14~20% in house zone and market place and paper, 42~70% in school and office zone. Moisture was estimated to be 54~57% in independent house zone, apartment and market place and 11~23% in school and office zone. And three composition was water content, 44.1%, incineration particle, 11.2%, volatile parts, 44.7% in respectively. That is because of seasonal effects and regional chracteristics. In the results of chemical composition and caloric value analysis, carbon(C) was 80% in vinyl and plastic and oxygen(O) was 54.4% in paper.