• Tribology and Lubricants
• /
• 제15권1호
• /
• pp.39-45
• /
• 1999

The wear behavior of $Al_2$O$_3$-40%TiO$_2$deposited on casted aluminum alloy (ASTM A356) by APS (Air Plasma Spray) against SiC ball has been investigated in this work. Wear tests were carried out at room temperature. The friction coefficient of $Al_2$O$_3$-40%TiO$_2$coating is lower than that of pure $Al_2$O$_3$coating(APS). $Al_2$O$_3$-40%TiO$_2$coating indicated the existence of the optimal coating thickness. It is found that voids and pores of coating surface resulted in the generation of cracks, and the cohesive of splats and the porosity of surface play a role in wear characteristics. It is suggested that the mismatch of thermal expansion of substrate and coating play an important role in wear performance. Tension and compression under thermo-mechanical stress may be occurred by the mismatch between thermal expansion of substrate and coating. The crack propagation above interface is observed in SEM.

• 대한기계학회논문집B
• /
• 제21권8호
• /
• pp.1056-1067
• /
• 1997

Present study visualized flow pattern and investigated spray characteristics of twin-fluid atomization with converging-diverging nozzles. Particle sizes were measured by using the Malvern particle analyzer, and the radial size distributions were evaluated by using the tomographic transform technique. The results show that the SMD generally increases in the radial direction at a prescribed liquid flow rate and the increasing rate in the SMD becomes gradual as atomizing gas pressure increases. The SMD decreases as the liquid flow rate increases at a fixed GLR (gas/liquid mass ratio). The atomization performance of the protrusion-type nozzle turned out to be superior to that of the flush-type. However, in the case of the protrusion-type, flow separation occurs outside the liquid delivery tube when the pressure at the gas nozzle chamber is high enough, which may deteriorate the atomization performance.

• 대한기계학회논문집B
• /
• 제26권7호
• /
• pp.1047-1054
• /
• 2002

To improve the fuel consumption and exhaust emission for gasoline engines, GDI(Gasoline Direct Injection) system was spotlighted to solve above requirements. Thus, many researchers have been studied to investigate the spray characteristics and the mixture formation of GDI injector. In this study, we tried to study the spray characteristics of a gasoline direct injector by using entropy analysis and PlV methods. The entropy analysis is based on the concept of statistical entropy, and it identifies the degree of homogeneity in the fuel concentration. The PlV method was adopted to determine the fluid dynamics information at the spray. From the applied results on a direct injection gasoline spray, we could find that the direct diffusion phenomena was a dominant factor in the formation of a homogeneous mixture at downstream of GDI spray especially under vaporizing ambient conditions, and mixing phenomena was also progressed by momentum exchange with induced air. In addition, the correlation between entropy and vorticity strength enabled to find their relation.

• 복식
• /
• 제46권
• /
• pp.31-48
• /
• 1999

The purpose of this study is to offer fundamental data for classification of somatotype for boys of elementary school age. The subject were 458 elementary school boys aged from 7 to 12 living in Pusan. Data were collected by 56 anthropometric 11 photoraphic measurements and 41 body indices. 56 anthropometric measurements were analyzed by ANOVA and method of Duncan-test as Multiple Range Test among 6 grade groups and then total 108 measurments were analyzed by statistical data processing. The results are as followings: 1, In Duncan-test boys were significantly different in most of height and length items but were not significantly different in main items for clothing construction among 1.2/3.4/5.6 grades so that the period of elementary school age were divided with 3 periods. 2. According to increase school age most of item's means increased gradually and personal difference for each items increased too. In case of height and length items the items of lower half were greater than the items of upper half in personal difference and depth items were greater than the breadth items in personal difference. And weight and angle items were very great personal difference is specially.

• 한국재료학회지
• /
• 제14권6호
• /
• pp.443-450
• /
• 2004

Parylene polymer thin film shows excellent homogeneous coverage chracteristics when it was deposited onto very complex three dimensional solid matters, such as deep hole and micro crack. The parylene deposition process can be conducted at room temperature although most of chemical vapor deposition processes request relatively high processing temperature. Therefore, the parylene coating process does not induce any thermal problems. Parylene thin film is transparent and has extremly high chemical stability. For example, it shows high chemical stability with high reactive chemical solutions such as strong acid, strong alkali and acetone. The bio-stability of this material gives good chances to use for a packaging of biomedical devices and electronic devices such as display. In this review article, principle of deposition process, properties and application fields of parylene polymer thin film are introduced.

• Current Photovoltaic Research
• /
• 제8권2호
• /
• pp.54-59
• /
• 2020

Within the IEA (International Energy Agency) PVPS (Photovoltaic Power System) Programme Task 15, 'Enabling Framework for the Acceleration of BIPV,' a round-robin action focusing on the performance of vertical BIPV elements as a facade in different climatic environments was performed. The performance of identical (both, in construction and bill of materials (BOM)) glass-to-glass c-Si BIPV elements was monitored at seven outdoor test sites in 6 different countries in Europe and Asia. In this work, the comprehensive results of the electrical and corresponding meteorological data will be presented and discussed. The monitored data were merged, processed, and filtered for further analysis. The analysis includes the chracteristics of the module temperatures and the in-plane irradiation at the outdoor test locations, mean daily PR per test module, time series of mean daily performance ratio coefficients, and monthly yield.

• 한국초지조사료학회지
• /
• 제11권1호
• /
• pp.53-59
• /
• 1991

This experiment was conducted to investigate the effects of propionic acid and wilting on fermentation quality of Italian ryegrass silage. Grass material was wilted for a day before ensiling and propionic acid(0. 0, 0. 2. 0. 5 and 0.8 7~ of fresh matter) was applicated at ensiling time. Chemical composition, fermentation acids, pH, microbial population and distribution of the nitrogen contents were evaluated. The results obtained are summarized as follows: 1. The contents of dry matter and water soluble carbohydrate in the silage were increased by wilting, and crude fibre, NDF and ADF were decreased with increasing propionic acid levels. 2. The pH values of the silage increased by increasing DM content, but decreased with increasing propionic acid levels. Lactic acid content lowed in wilted silage, and acetic acid and butyric acid formation were decreased with increasing propionic acid levels. 3. Total nitrogen content in the silage was i n ~ r e a s e d ( ~ < . 05) by addition of propionic acid and wilting, and was the highest in the prewilting-0.8 Q propionic acid applicated silage. The production of NHBN was decreased with propionic acid and was the lowest in the 0.8 % treated silage. 4. The number of total bacteria and yeasts were estimated $10^6~10^7$, $10^2~10^3$ respectively. Moulds number were decreased with increasing propionic acid levels.

• 한국의류학회지
• /
• 제23권3호
• /
• pp.385-390
• /
• 1999

Dyeing properties of silk fabric with green tea colorants were studied by investigating the effect of dyeing conditions such as concentration pH dyeing temperature and time on dye uptakes and effect of mordants on color change and dye uptakes, And various colorfastnesses of dyed fabrics were evaluated for practical use. Green tea colorants showed relatively good affinity to silk fabric and produced yellowish red color. Langmuir adsoption isotherm was obtained. Therefore it is considered that ionic bondings between colorants and silk fibers are formed. Mordants did not improve dye uptakes and affect color of dyed fabrics significantly. But mordanting adversely affected lightfastness of dyed fabrics. Regardless of mordanting colorfastness to perspiration especially in alkaline condition of dyed fabrics showed low rating compared with other colorfastness. It is concluded that mordanting is not necessary for silk dyeing with green tea colorants.

• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2289-2304
• /
• 1998

For the performance analysis and traffic control of ATM networks carrying video sequences, need an appropriate video traffic model. In this paper, we propose a new traffic model for MPEG compressed videos which are widely used for any type of video applications at th emoment. The proposed modeling scheme uses scene-based traffic characteristics and considers the correlation between frames of consecutiv GOPs. Using a simple scene detection algorithm, scene changes are modeled by state transitions and the number of GOPs of a scene state is modeled by a geometric distirbution. Frames of a scene stte are modeled by mean I, P, and B frame size. For more accurate traffic modeling, quantization errors (residual bits) that the state transition model using mean values has are compensated by autoregressive processes. We show that our model very well captures the traffic chracteristics of the original videos by performance analysis in terms of autocorrelation, histogram of frame bits genrated by the model, and cell loss rate in the ATM multiplexer with limited buffers. Our model is able to perrorm translations between levels (i.e., GOP, frame, and cell levels) and to estimate very accurately the stochastic characteristics of the original videos by each level.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.207-213
• /
• 1996

A ternary compound semiconductor $Al_{x}$-Ga/1-x/Sb crystals which have energy gap from 0.7eV to 1.6ev at room temperature with the composition ratio were grown by using the vertical Bridgman method. The characteristics of $Al_{x}$-Ga/1-x/Sb were investigated in this study. The lattice constants of $Al_{x}$-Ga/1-x/Sb crystals with the composition ratio were appeared from 6.096$\AA$ to 6.135$\AA$ with the composition ratio. The electrical properties of the $Al_{x}$-Ga/1-x/Sb crystals measured the Hall effect by van der Pauw method at the magnetic field of 3 kilogauss and at room temperature. The resistivity of Te-doped $Al_{x}$-Ga/1-x/Sb crystals increased from 0.771 $\Omega$-cm to 5 $\Omega$-cm at room temperature with increasing the composition ratio. The mobility of Te-doped $Al_{x}$-Ga/1-x/Sb crystals varied with the composition ratio x, within the following three different regions, such as GaSb-like (0$\leq$x$\leq$0.3), intermediate (0.3$\leq$x$\leq$0.4) and AlSb-like (0.4$\leq$x$\leq$1).eq$1).