• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.20-21
• /
• 2016

In this study, the shielding properties of concrete with conductive materials as shielding material for electromagne- tic pulse(EMP) within 10kHz~18GHz were investigated. The shielding effectiveness of specimens were compared with different entrained materials. The shielding effectiveness were determined according to MIL-STD-188-125-1, IEEE-STD-299 at 28 days of concrete curing. The results of shielding effectiveness did not meet the criteria(80dB) severely.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.41-42
• /
• 2016

In this study, the basic properties of concrete with entrained materials as shielding material for electromagnetic pulse(EMP) within 10kHz~1GHz were investigated. The concretes of moderate strength were prepared with different entrained materials. The shielding effectiveness will be determined according to MIL-STD-188-125-1 at 28 days of concrete curing. The results of physical properties were all satisfied of setting criteria.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.224-225
• /
• 2019

The purpose of this study was to develop a technology to prevent leakage of construction structures for the Chinese market. The first key development factor is to establish a joint quality standard that corresponds to all performance criteria set out in Chinese Standard JC / T 2428-2017. The second key development factor is to develop a product capable of exhibiting performance in a low temperature environment of $-30^{\circ}C$ and coping with 15mm structure behavior.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7227-7236
• /
• 2015

The survey revealed that, due to the discharge characteristics of seafood wastewater, irregular inflow loads were caused, making it difficult to treat the wastewater safely. It is crucial for the operation of pressure and floating tanks for the treatment of high-concentration organic wastewater such as seafood wastewater. The survey of operation factors for the pressure and floating tanks revealed this: A/S ratio 0.05 (design criteria 0.01), the pressurized air pressure 8bar(design criteria 6bar), the pressure tank pressure 6bar (design criteria 4.5bar), and HRT 60sec(design criteria: 10sec). Also, the recirculation rate was changed to over 40%(design criteria: 30%), and the surface load rate was changed to under $13.7m^3/m^2{\cdot}hr$(design criteria: under $17.7m^3/m^2{\cdot}hr$); thus, compared to the initial design criteria, the operation factors were changed according to inflow characteristics, thus enhancing the pressure and floating tank performance. The survey of inflow load revealed BOD 140.7%, $COD_{Mn}$ 120.32%, and SS 106.3%, compared to the inflow design criteria, as well as T-N 135.5% and T-P173.3%, higher than the design criteria. The survey of the treatment facility annual operation cost revealed high portions in sludge treatment cost(27.7%) and chemicals costs(26.0%), and the sludge treatment cost will likely further increase due to the ban on ocean dumping. The unit cost for the treatment of seafood wastewater was found to be KRW 3,858 per ton, more than 27 times higher than the sewage treatment cost(KRW 142.6/ton), presumably because the seafood wastewater contains high-concentration organic substances and nutritive salts.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.431-437
• /
• 2013

In this paper, Fire resistance test was carried out to obtain class H-120 thermal insulation of fire dampers according to a hydrocarbon fire conditions. Specimens were fabricated three different types according to the change of the insulation system applied to damper blade and coaming which were measured surface temperature by performing the fire resistance test. As a test result, specimen-1, 2 of an uninsulated damper blade were exceeded thermal insulation acceptance criteria at 21 minutes, 46 minutes respectively, but specimen-3 of an insulated damper blade was satisfied thermal insulation acceptance criteria during 120 minutes. The test results showed that the insulation of the damper blade is an important factor in the fireproof performance of fire dampers concerning the coaming length minimum 500 mm on the unexposed side as specified test standard.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.1
• /
• pp.103-109
• /
• 2009

Strong winds according to global warming cause the increase of the frequency and the repair cost of damaged roofs. In the United States, Factory Mutual Insurance Company(FMIC) promotes the roofing design that resists heavy wind-load, as the means of strict criteria. This fact reveals that more durable roofing system will be also required in Korea. Therefore, this study aims at developing such a system with high wind-resistance performance using Thermoplastic polyolefin(TPO) and Electromagnetic induction technology(EIT) than the previous systems. The system presented in this study consists of 4 main devices as follow; 1) a disc to fix sheets for TPO & EIT method, which can conduct structural design according to site condition, such as region, building height, and wind load. 2) a nail to have about 30% stronger lifting-up capacity than that of the previous nail. 3) a disc to fix sheets, which has triangle protuberance not to damage sheets in the repeatable wind load, and 4) a electromagnetic induction device to combine a disc and a sheet by heating uniformly and quickly adhesive agent on the disc. The results of mock-up test illustrate that the system provides wind-resistant performance to achieve satisfactorily the structural design criteria of FMIC. In addition, the system is faster, chipper, and easier than the existing system, and is expected that this roofing system can be applied to the rehabilitations of an existing as well as a new building.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.4
• /
• pp.322-334
• /
• 2007

This study covers the investigation of the actual condition in the workplace to produce plastics products using synthetic resins and the investigation on the trends amount of the domestic production of thermoplastic resins. To analyze the monomers included in thermoplastic resins frequently used in the workplace, we analyzed thermal characteristics for test compounds using thermogravimetric analysis and did the qualitative analysis using Pyrolyzer GC-MSD & TDS GC-MSD. And then we classified the health hazard of monomers based on GHS classification criteria using information toxicity & carcinogenicity. The number of the workplace to produce plastics products among all domestic manufacturers of 73,884 was 4,391 (5.94%). The number of workers to produce plastics products among all workers of 2,522,750 in all domestic manufacturers was 104,971 (4.16%). The amount of production per year for thermoplastic resins is in the order of PP, HDPE, LDPE, PVC, ABS, PS and such compounds was producing over 1 Million ton per year each. The classification result based on GHS classification criteria for 22 main compounds included thermoplastic resins says 2 compounds of acrylonitrile, naphthalene are in Acute oral category 3 and benzene is in Acute dermal category 1. The classification results of health hazard of carcinogenicity based on IARC & ACGIH carcinogen classification says 2 compounds of benzene, vinyl chloride are in category 1A (known to be human carcinogens).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.6
• /
• pp.700-707
• /
• 2003

Surface sediments in the mouth area of Jinhae Bay were investigated to evaluate the benthic environment in terms of geochemical criteria and macrobenthos abundance. Characteristics of the surface sediment distribution exhibited muddy sediments in the most part of study area. Some mixed sediments of coarse sand and mud were distributed along the coastal area of Geoje Island and around the Jeo Islands. Organic matter from ignition loss and total organic carbon from CHNS varied between $8.8-1.7\%,\;and\;4.62-0.77\%,$ respectively. The source of organic matter based on the C/S ratio was mixed with in situ biogenic and terrigenous organic matter. The C/S ratio of organic matter also suggested both an anoxic bottom condition in several parts of the study area. The content of hydrogen sulfide in surface sediment was extremely variable and showed spatio-temporal variation from site to site. In several locations, the content of hydrogen sulfide as an index of eutrophication was over the critical value (0.2 mg/g), suggesting that several parts of the study area were not favorable for the habitat of macrobenthos. The relationship among the number of individuals of marcrobenthos, hydrogen sulfide, and organic matter was not clear, but a potential negative relationship between individuals of marcrobenthos and hydrogen sulfide was indicated.

• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.371-381
• /
• 1993

When the multicollinearity presents in the standard linear regression model, ridge regression might be used to mitigate the effects of collinearity. As the prediction-oriented criterion, the integrated mean sqare error criterion $J_w(k)$ was introduced by Lim, Choi & Park(1980). By noting the equivalent relationship between the $C_k$ criterion and $J_w(k)$ with a special choice of weight function $W(x)$, we propose a more reasonable selection rule of k w.r.t. the $C_k$ criterion than that given in Myers(1986). Next, to find the $\beta(k)$ which behaves reasonably well w.r.t. competing criteria, we adopt the minimax principle in the sense of maximizing the worst relative efficiency of k among competing criteria.

• Nuclear Engineering and Technology
• /
• v.43 no.2
• /
• pp.149-158
• /
• 2011

Metal waste generated from the pyroprocessing of 10 MtU of spent fuel was classified by comparing the specific activity of a relevant radionuclide with the limit value of the specific activity specified in the Korean acceptance criteria for a lowand intermediate-level waste repository. A Korean Optimized Fuel Assembly design with a 17${\times}$17 array, an initial enrichment of 4.5 weight-percent, discharge burn-up of 55 GWD/MtU, and a 10-year cooling time was considered. Initially, the mass and volume of each structural component of the assembly were calculated in detail, and a source term analysis was subsequently performed using ORIGEN-S for these components. An activation cross-section library generated by the KENO-VI/ORIGEN-S module was utilized for top-end and bottom-end pieces. As a result, an Inconel grid plate, a SUS plenum spring, a SUS guide tube subpart, SUS top-end and bottom-end pieces, and an Inconel top-end leaf spring were determined to be unacceptable for the Gyeongju low- and intermediate-level waste repository, as these waste products exceeded the acceptance criteria. In contrast, a Zircaloy grid plate and guide tube can be placed in the Gyeongju repository. Non-contaminated Zircaloy cladding occupying 76% of the metal waste was found to have a lower level of specific activity than the limit value. However, Zircaloy cladding contaminated by fission products and actinides during the decladding process of pyroprocessing was revealed to have 52 and 2 times higher specific activity levels than the limit values for alpha and $^{90}Sr$, respectively. Finally, it was found that 88.7% of the metal waste from the 17${\times}$17 Korean Optimized Fuel Assembly design should be disposed of in a deep geological repository. Therefore, it can be summarized that separation technology with a higher decontamination factor for transuranics and strontium should be developed for the efficient management of metal waste resulting from pyroprocessing.