• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.249-254
• /
• 1998

To synthesize cation exchange resin which has thermal stability, the sulfonated poly(ether ether sulfone) (SPEES) was obtained by sulfonation after synthesis of poly(ether ether sulfone) (PEES). It was prepared from hydroquinone and dichlorophenyl sulfone. From FT-IR results, the sulfonation was confirmed by the bands of asymmetric O=S=O stretching of $SO_3Na$ Na group at $1140cm^{-1}$ and S-C stretching at $621cm^{-1}$. The optimum condition of the sulfonation of PEES, based on IR absorbance, was 3 hr of reaction time, $30^{\circ}C$ of reaction temperature, and chlorosulfonic acid of 150 mol%. Ion exchange capacities calculated by the IR absorbance of PEES sulfonated in optimum condition was 6.2 meq/g, which was nearly similar to the ion exchange capacity calculated by titration. When the metal ion was adsorved, small brain, lump, hulled millet shape and compact surface, were observed in the morphology of SPEES.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.486-491
• /
• 2006

Heterogeneous membranes were prepared by compression molding for the recovery of ammonium ion from waste water. Degree of sulfonation for sulfonated ion exchange resin increased with increasing amount of chlorosulfonic acid. It was 3.32 meq/g at 10 vol%. The tensile strength and elongation of the heterogeneous membrane was decreased with increasing contents of ion exchange resin. The tensile strength for LLDPE matrix membrane was the highest and also the elongation for EVA matrix membranes were the highest. The water content of heterogeneous membrane was increased with increasing contents of ion exchange resin. The maximum value of transport number for PE matrix membrane was 0.973. The electrical resistance of LLDPE matrix membrane was the lowest. It was value of $10.36{\Omega}/cm^2$ at 70 wt% resins.

• Membrane Journal
• /
• v.22 no.3
• /
• pp.191-200
• /
• 2012

New composite membranes were manufactured by impregnating post-sulfonated poly(arylene ether sulfone)s containing perfluorocyclobutane (PFCB) groups into porous polytetrafluoroethylene (PTFE) films. Two kinds of post-sulfonated poly(arylene ether sulfone)s with two different monomer ratios (sulfonable biphenylene monomer : non-sulfonable sulfonyl monomer = 6 : 4, 4 : 6) were first prepared through three synthetic steps: synthesis of trifluorovinylether-terminated monomers, thermal cycloaddition polymerization and post-sulfonation using chlorosulfonic acid (CSA). The composite membranes were then prepared by adjusting the concentrations (5~20 wt%) of the resulting copolymers impregnated in the PTFE films. The water uptake, ion exchange capacity (IEC) and ion conductivity of the composite membranes were characterized and compared with their unreinforced dense membranes and Nafion. All the synthesized compounds, monomers and polymers were characterized by $^1H$-NMR, $^{19}F$-NMR and FT-IR and the composite membranes were observed with scanning electron micrographs (SEM).

• Membrane Journal
• /
• v.8 no.4
• /
• pp.210-219
• /
• 1998

Sulfonated poly(ether sulfone)(SPES) of various ion exchange capacity (IEC) was prepared by heterogeneous sulfonation with chlorosulfonic acid (CSA) to make hydrophilic ultrafiltration membrane for reducing fouling. The effects of CSA concentration, reaction temperature and reaction time has been investigated. The reaction was effective when the temperature is above 10$\circ$C and the CSA concentration is over 0.05 mol, although polymer chain has been significantly degraded. The substitution of sulfonic acid groups was characterized by FTIR and $^1$H-NMR. Transport properties and fouling test have been conducted to the modified SPES ultrafiltration rnembranrs by heterogeneors method. Membranes were obtained using DCM and PVP as a non-solvent and pore forming agent, respectively. Flux reduced and rejection increased with ion exchange capacity. Finger-like structure was disappeared and the thickness of top layer was increased. Dense membrane by non-solvent DCM and porous membrane by pore forming agent PVP was prepared. Fouling was reduced with increasing ion exchange capacity because of hydrophilicity.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.04a
• /
• pp.42-43
• /
• 1996

고분자 분미막을 이용한 분리기술은 기존의 분리기술에 비하여 에너지의 절약과 높은 분리효율 등의 장점이 있어 거의 모든 산업에 이용되고 있다. 분리막의 용도가 다양화됨에 따라서 내열성, 내약품성, 내유기용매성을 갖는 막소재의 개발이 필요하게 되었다. polyimide(PI)게의 고분자는 물리, 화학적 성능이 우수하고 내열성과 내유기용매성 등이 우수한 열가소성수지로서 film, sheet, tubular형으로 만들 수 있어 한외여과막이나 역삼투막, 기체분리막 등에 이용되고 있다. 그러나 투과속도를 높디고, fouling을 줄이기 위해서는 화학적 개질을 통해 친수성을 높이는 방법이 필요하다. 본 실험에서는 내열성과 내유기용매성이 우수한 polyetherimide계 고분자를 chlorosulfonic acid(CSA)를 이용하여 술폰화시킴으로써, 극성기의 도입에 의해 친수성이 향상된 sulfonated polyetherimide(SPEI)를 합성하였다.

• Journal of the Korean Chemical Society
• /
• v.45 no.6
• /
• pp.546-548
• /
• 2001

Neat chlorosulfonic acid reacts with silica gel to give silica sulfuric acid in which sulfuric acid is immobilized on the surface of silica gel via covalent bond. A combination of silica sulfuric acid and wet SiO$_2$ was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives by using microwave irradiation under solvent free conditions.

• Journal of Pharmaceutical Investigation
• /
• v.18 no.2
• /
• pp.69-81
• /
• 1988

We studied on the synthesis of chloromethylated polystyrene as a precursor of optically active polymers for direct resolution of optical isomers. Changing the degree of crosslinking and the kind of crosslinking agents, several polystyrene resin matrices were synthesized. The matrices were chloromethylated with methylal and chlorosulfonic acid as chloromethylating agents. The effects of solvents of various dielectric constants on the chloromethylation were quantitavely examined. We also synthesized chloromethylated polystyrene of macroreticular type that retained large surface area and good physical stability. The differences between the macroreticular type and macroporous type were investigated.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.04a
• /
• pp.76-76
• /
• 1993

헤파린은 혈액응고계에서 antithrombin III 존재하에서 thrombin과 factor Xa의 작용을 억제함으로써 항응고제로서 작용을 한다. 심정맥혈전증 등 임상에 응용성이 높지만 장기적 사용시 혈소판 감소효과, 출혈, 골다공증 등의 부작용이 나타나고 있다. 본연구는 식물성 생약으로부터 당을 분리 정제하여 화학적으로 sulfation시켜 in vitro와 ex vivo에서 항응고활성을 비교하였다. 우선적으로 aPTT를 측정하여 응고시간의 연장을 시키는 다섯종류의 식물생약을 선택하였고 이 중에서 청호(Artemisiae apiaceae)로부터 산성당을 분리하여 pyridine과 chlorosulfonic산으로 sulfation 시켰율 때 in vitro상에서 항응고활성은 sulfation전에 비해 두드러지게 증가하였다. 농도를 달리 하여 실험동물에 투여시 응고시간의 연장 역시 비슷한 양상을 보여주었다. Thrombin 억제는 발견되지 않았지만 sulfate기와 항응고 활성과는 관계가 있는 것처럼 보였다.

• Membrane Journal
• /
• v.9 no.1
• /
• pp.1-9
• /
• 1999

Sulfonated polyetherimide having anionic charge and better hydrophilicity than polyetherimide was prepared by reacting polyetherimide with chlorosulfonic acid. To prepare casting solution, from which the membrane having good performance can produce. Polyvinylpyrrolidone as a pore forming agent and volatile weak solvent such as dichloromethane to foml the dense skin layer were added to the sulfonated polyetherimide / N -methyl-2-pyrrolidone solution. Membrane fabricated sulfonated PEl showed better fouling resistance to the protein than those fabricated PEL because of its hydrophilicity. Solute having negative charge was removed effectively with membrane fabricated from the sulfonated PEl because of its the same electron charge.

• Membrane Journal
• /
• v.6 no.1
• /
• pp.10-21
• /
• 1996

This study is undertaken to investigate the major factor which causes a fouling phenomenon in membrane separation system and effect of hydrophilic treatment on fouling repression of hydrophobic polymer (polysulfone, PSf). Chlorosulfonic acid (CSA) and sulfuric acid as a sulfonating agents are used to produce sulfonated PSf (SPSf). SPSf membrane is prepared under several conditions to investigate it's separation process. The extent of fouling-repression is measured by membrane filtration index (MFI) value. With increasing the ion exchange capacity (I.E.C), the flux of SPSf membrane is decreased but the rejection is increased and the flux is less reduced. According to the MFI value, the SPSf membrane has a fouling-retardant effect.