• 공업화학
• /
• 제24권4호
• /
• pp.396-401
• /
• 2013

Benzo[1,2,5]thiadiazole, carbazole 및 phenanthrene을 기본 골격으로 한 교대공중합체인 poly[9-(2-octyl-dodecyl)-9H-carbazole-alt-4,7-di-thiophen-2-yl-benzo[1,2,5]thiadiazole] (PCD20TBT)와 poly[9,10-bis-(2-octyl-dodecyloxy)-phenanthrene-alt-4,7-di-thiophen-2-yl-benzo[1,2,5]thiadiazole] (PN40TBT)을 Suzuki coupling reaction을 이용하여 중합하였다. 합성한 고분자들은 chloroform, chlorobenzene, 1,2-dichlorobenzene, tetrahydrofuran, toluene과 같은 유기용매에 대한 용해도가 우수하였다. PCD20TBT의 최대흡수 파장과 밴드갭은 각각 535 nm와 1.75 eV이고, PN40TBT의 최대흡수 파장과 밴드갭은 각각 560 nm과 1.97 eV이었다. PCD20TBT의 HOMO 및 LUMO 에너지준위는 각각 - 5.11 eV와 - 3.36 eV이고, PN40TBT의 HOMO 및 LUMO 에너지준위는 각각 -5.31 eV와 -3.34 eV이었다. 합성한 고분자와 (6)-1-(3-(methoxycarbonyl)-{5}-1-phenyl[5,6]-fullerene(PCBM)을 1:2의 중량비로 블랜딩하여 제작한 이종접합형태(bulk heterojunction) 태양전지를 제작하였다. PCD20TBT의 광전변환효율은 0.52%, PN40TBT의 광전변환효율은 0.60%이었다. 그리고 소자의 단락 전류밀도, 충진 인자와 개방전압은 PCD20TBT가 각각 $-1.97mA/cm^2$, 38.2%, 0.69 V이며, PN40TBT의 경우 각각 $-1.77mA/cm^2$, 42.9%, 0.79 V이었다.

• 한국산업보건학회지
• /
• 제26권2호
• /
• pp.159-169
• /
• 2016

Objectives: The objective of this study was to evaluate the generating characteristics of VOCs and the exposure effect to chemicals among laundry workers and to identify the current status of occupational safety and health through health check-ups. Methods: During the six-month period from April to September 2015, this study quantitatively measured seven VOCs in ten laundries and carried out health examinations on 35 workers. Results: Comparing the monitoring results for the ten laundries, they were classified into three groups by ventilation system, dry-cleaning and size of shop. The average concentration of toluene, chlorobenzene, xylene, ethylbenzene, benzene, styrene and TCE were 23.9, 15.6, 5.5, 2.8, 0.9, 0.3 and $1.3{\mu}g/m^3$, respectively. During dry-cleaning, VOC concentrations were 1.3-8.9 times higher than usual. On the other hand, at night the concentrations of toluene, chlorobenzene, xylene, ethylbenzene, benzene, styrene and TCE were 64.3, 41.5, 12.2, 6.3, 1.1, 1.2 and $6.6{\mu}g/m^3$, respectively. The health checkup results for the 35 workers showed that 13 workers were diagnosed as normal, while 22 workers were diagnosed as requiring continuous monitoring or re-checkup of liver and hematogenous functions. Conclusions: Although the results of exposure evaluation to VOCs did not exceed reference value and items had a low correlation with health checkup items, it is necessary to improve indoor air quality due to VOC volatilization from clothes.

• 분석과학
• /
• 제17권3호
• /
• pp.240-250
• /
• 2004

가스크로마토그래프-질량분석기를 사용한 물 시료 중 15종류의 휘발성 및 반휘발성 유기물질들의 고감도 및 빠른 분석법이 확립되었다. 물 시료는 200 mL를 분액깔대기에 넣고 pH 6.5에서 n-pentane 1 mL를 사용하여 추출하였다. Fluorobenzene과 1,2-dichlorobenzene-d4을 내부표준물질들로 사용하였고 혼합용액은 진탕기에서 5분간 추출하여 더 이상의 농축이나 정제과정 없이 GC-MS (selected ion monitoring)로 정량분석 하였다. 피크모양은 매우 좋았고, 작은 편차로서 75% 이상의 양호한 회수율을 보였고 검출한계는 0.5-10 ng/L의 분포를 보였다. 개발된 분석법으로 GC-MS 1대당 1일 40개의 시료 분석이 가능하고 매우 간단하여 숙련되지 않은 사람들도 쉽게 사용할 수 있어 각 정수장 등 현장에서 사용하기에 적합하다. 개발된 방법을 사용하여 한국의 한 호수와 3개 정수장의 원수 및 처리수에서 휘발성 및 반 휘발성 유기물질들을 모니터링 하였다. 한국의 한 호수와 3개의 정수장에서 시료를 채취하여 정량 분석한 결과 benzene, toluene, xylene, isopropylbenzene, 1,3,5-trimethylbenzene, 1,2,4-trimethylbenzene, naphthalene과 2,4,6-trichlorophenol은 각각 0.4, 1.9, 1.3, 0.2, 1.8, 13.0, 1.7 그리고 $1.1{\mu}g/L$까지 검출되었으나 chlorobenzene, trichloroethylene, tetrachloroethylene, ethylbenzene, n-butylbenzene과 dibromochloropropane의 농도는 같은 기간 동안에 검출한계 이내의 값을 보였다. 이 화합물들의 정수처리과정에서의 제거효율을 조사한 결과 대부분은 정수처리과정에서 제거되는 것으로 조사되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.69.2-69.2
• /
• 2010

Recently, bulk hetero-junction cells have been extensively studied by many researchers. Most of these cells were fabricated by spin coater. However, the spin coating process is not favorable to the large-scaled industry because it is not compatible with roll-to-roll process. One of the alternative methods is Doctor blading. In this study, we fabricated large OPV cells having total area of $100cm^2$. The buffer layer was Poly-(3,4-ethylenedioxythiophene) : poly-(styrenesulfonate) aqueous dispersion (PEDOT:PSS) and the active material is poly (3-hexythiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) blend in the solvent of Chlorobenzene. All of the organic layers were coated by dragging the blade with a speed of 5~20 mm/s on the stage with a temperature of $50^{\circ}C$. As-bladed PEDOT:PSS layer was baked at $120^{\circ}C$ for 10 minutes to eliminate the water. The cell structure is patterned ITO substrate/PEDOT:PSS/P3HT:PCBM/LiF/Al. The topmost electrode, LiF/Al, was deposited by thermal evaporation. After depositing electrode, and the cell was annealed at $150^{\circ}C$ for 30 minutes. The measured ISC, VOC, fill factor, and PCE were 2.95 A, 5.86 V, 0.32, and 0.78%, respectively. PCE was quite low but the large active area could be obtained successfully.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.460-461
• /
• 2009

We studied the effects of post-annealing treatment on poly(3-hexylthiophene)(P3HT, donor):[6,6]-phenyl $C_{61}$ butyric acid methyl ester(PCBM, acceptor) blend film as an active layer in the organic solar cells(OSCs). For the formation of the active layer, 3 wt.% P3HT:PCBM solution in chlorobenzene were deposited by spin-coating method. In order to optimize the performance of OSCs, the P3HT crystallization and the redistribution of PCBM cluster at P3HT:PCBM composition as a function of post-annealing condition from room temperature to $200^{\circ}C$ were measured by the Hall effect and the UV-vis Spectrophotometer. We thought that the improved efficiency in the OSCs with post-annealing treatment at $150^{\circ}C$ can be explained by the efficient separation or collection of the photogenerated excitons at donor-acceptor interface by P3HT crystallization.

• Journal of Chest Surgery
• /
• 제12권1호
• /
• pp.16-22
• /
• 1979

Clinical evaluation of contact sensitization to 2, 4-dinitro-chlorobenzene [DNCB] was performed in 2 groups: group A [30 patients with non-malignant disease] and group B [30 patients with bronchogenic carcinoma]. Initial sensitization was elicited out by applying 2, 000 ug of DNCB to skin surface of the both group A and B. Subsequently a relatively weak challenge dose, 200 ug of DNCB, was applied 14 days later, showing the satisfactory results of sensitization with minimizing non-specific irritative inflammatory skin response. Delayed cutaneous hypersensitivity reactions shown by spontaneous flare phenomena appeared at the challenge site, and they were assessed 48 hours later. The reaction were graded from +1 to +4 according to the degree of flare or vesicular reaction. The results were as follows: 1. 28 cases [93%] of group A, however, only 18 cases [67%] of group B exhibited delayed cutaneous hypersensitivity reaction to DNCB contact sensitization [P<0.02]. 2. Of group A, the delayed cutaneous hypersensitivity reactions above +2 of DNCB score were 25 cases [83%], meanwhile 11 cases [37%] in group B [P<0.001]. 3. Undifferentiated carcinomas showed highest incidence of anergy to DNCB contact sensitization in the all histologic types of group B. 4. In group B, 8 [42%] of 19 cases who react to DNCB were resectable, whereas only 2 [18 %] of 11 cases who failed to react to DNCB were resectable for curative cancer surgery. These study suggests that cellular immune reaction of group B was depressed remarkably comparing with that of group A.

• Journal of Microbiology
• /
• 제44권1호
• /
• pp.23-28
• /
• 2006

We investigated the effects of halogenated aromatic compounds (HACs) including naturally occurring ones (L-thyroxine, 3-chloro-L-tyrosine, 5-chloroindole, 2-chlorophenol, 4-chlorophenol and chlorobenzene) on polychlorinated biphenyl (PCB) dechlorination in sediment cultures. A PCB-dechlorinating enrichment culture of sediment microorganisms from the St. Lawrence River was used as an initial inoculum. When the culture was inoculated into Aroclor 1248 sediments amended with each of the six HACs, the extent of dechlorination was not enhanced by amendment with HACs. The dechlorination patterns in the HAC-amended sediments were nearly identical to that of the HAC-free sediments except the 3-chloro-L-tyrosine-amended ones where no dechlorination activity was observed. When these sediment cultures were transferred into fresh sediments with the same HACs, the dechlorination specificities remained the same as those of the initial inoculations. Thus, in the present study, the substrate range of the highly selected enrichment culture could not be broadened by the HACs. It appears that HACs affect PCB dechlorination mainly through population selection rather than enzyme induction of single population.

• Transactions on Electrical and Electronic Materials
• /
• 제12권2호
• /
• pp.80-83
• /
• 2011

We have fabricated phosphorescent white organic light-emitting devices (WOLEDs) with a spin-coated poly(Nvinylcarbazole) [PVK] host layer. Iridium(III) bis[(4,6-difluorophenyl)-pyridinato-N,$C^{2'}$]picolinate (FIrpic), tris(2-phenylpyridine)iridium(III) [$Ir(ppy)_3$], and tris(2-phenyl-1-quinoline)iridium(III) [$Ir(phq)_3$], were used as the blue, green, and red guest materials, respectively. The PVK was mixed with FIrpic, $Ir(ppy)_3$, and $Ir(phq)_3$ molecules in a chlorobenzene solution and spin-coated in order to prepare the emission layer; 3-(4-biphenylyl)-4-phenyl-5-(4-tertbutylphenyl)-1,2,4-triazole (TAZ) was used as an electron transport material. The resultant device structure was ITO/PVK:FIrpic:$Ir(ppy)_3:Ir(phq)_3$/TAZ/LiF/Al. The electroluminescence, efficiency, and electrical conduction characteristics of the WOLEDs based on the doped PVK host layer were investigated. The maximum current efficiency of the three wavelength WOLED with the doped PVK host was 19.2 cd/A.

• 한국대기환경학회지
• /
• 제14권4호
• /
• pp.293-302
• /
• 1998

This study was performed to investigate the behavior of chlorobenzenes (CIBZS) and chlorophenols (CIPhs) in a thermally treated MSWI fly ash. The experiment was carried out in a fixed bed reactor at the temperature range of 300~$600^{\circ}C$. Reaction time range was between 30 and 120 minutes, and NB and 02 gases were used as carrier gas. The decomposition rate of CIBZS was more affected by reaction time than by the reaction temperature. The decomposition rate of CIPhs was affected by both parameters. Decomposition rate of CIBZS and CIPhs reached 80.4% and 96.6% at $600^{\circ}C$, 120 min, respectively. Considering the effect of O2 content, decomposition rate of CIBZS and CIPhs was the highest at 10% of O2 content. Declorination and decomposition reactions Pere investigated by analyzing homologue distribution. Higher chlorinated CIBZS and CIPhs homologue decreased but lower chlorinated compounds increased with the increase of temperature. Effect of O2 on the homologue distribution of these compounds was not clear in the range of our experiment conditions.

• Environmental Engineering Research
• /
• 제12권2호
• /
• pp.46-54
• /
• 2007

Concentrations of the principal volatile organic compounds, such as benzene, toluene, ethylbenzene, m,p,o-xylene, styrene, and chlorobenzene were measured at the solid waste treatment plants classified into four categories; municipal waste incinerator, municipal waste landfill site, industrial waste incinerator and industrial waste landfill site. The average concentration of VOCs in industrial waste treatment facilities was 33.43 ppb and was significantly higher than that measured at municipal waste treatment facilities (4.71 ppb). The average toluene concentrations measured at incinerators (13.05 ppb) were a little higher than those measured at landfill sites (11.54 ppb). The contribution of the waste treatment facilities to the concentration of benzene (0.35 ppb) and o-xylene (0.15 ppb) in the industrial area was relatively small. However, toluene measured in the industrial waste treatment facilities was the most abundant VOCs with the average concentration of 21.37 ppb. As a result of analyses of fingerprint, in cases of IISH and ILUS, a variety of compounds other than major VOCs were detected in high level. On the Pearson correlation analysis, the correlation was generally positive and some pairs of these VOCs were very strongly correlated (correlation coefficient > 0.75).