• 제목/요약/키워드: Chlorine tolerance

검색결과 11건 처리시간 0.026초

Silane 화합물을 이용한 역삼투막 활성층의 표면개질 (Surface Modification of Reverse Osmosis Membrane Skin Layer by Silane Compound)

  • 이용택;신동호;김노원
    • 멤브레인
    • /
    • 제16권2호
    • /
    • pp.106-114
    • /
    • 2006
  • 방향족 폴리아미드 역삼투 복합 박막에 트리알콕시알킬 실란 화합물을 안정적으로 정착시켜 내염소성이 향상된 복합막을 제조하는 방법에 관하여 조사하였다. 실란 화합물의 알킬 그룹의 탄소가 1개인 methyltriethoxysilane (METES)와 8개인 octyltriethoxysilane (OCTES) 표면 개질에 사용하였다. 긴 알킬 체인을 갖는 실란(OCTES)이 정착된 멤브레인의 경우, 일반 폴리아미드 역삼투막 또는 짧은 알킬 체인을 갖는 실란(METES)에 비해 개염소성이 크게 향상됨을 알 수 있었다. 본 연구에서는 표면 분석을 통하여 OCTES 코팅막과 METES또는 상용막과의 내염소성 차이를 설명하고자 하였다. EDX 원소 분석을 통하여 실란 화합물 둘 다 폴리아미드상에 안정적으로 고정되었음을 볼 수 있었으나 표면 조도나 접촉각 분석에서는 긴 알킬 체인을 가진 OCTES가 혐수성에 큰 영향을 주고 있음을 확인할 수 있었다.

친수성 처리된 다공성 지지체를 이용한 폴리아마이드 박막 역삼투 복합막 제조 및 특성 분석 (Preparation and Characterization of Polyamide Thin Film Composite Reverse Osmosis Membranes Using Hydrophilic Treated Microporous Supports)

  • 손승희;제갈종건
    • 멤브레인
    • /
    • 제24권4호
    • /
    • pp.317-324
    • /
    • 2014
  • 기존의 폴리아마이드 박막 역삼투 복합막(PA TFC RO Membrane)은 우수한 분리투과특성을 지니고 있으나 내염소성이 상대적으로 낮은 단점을 지니고 있다. 본 연구에서는 이를 해결하기 위하여 표면에 -OH나 -COOH 기가 도입된 다공성 지지체를 제조하고, 그 표면에 폴리아마이드 박막을 형성하여 역삼투 복합막을 제조하였다. 제조된 역삼투막의 구조 및 분리투과 특성은 여러 가지 기기분석 방법과 투과테스트 방법으로 분석하였다. 폴리아마이드 박막을 제조하기 위하여 아민계 단량체로는 메타-페닐렌 디아민(MPD)과 2,6-디아민 톨루엔(2,6-DAT)을 사용하였고, 디엑시드계 단량체로는 트리-메소일 클로라이드(TMC)를 사용하였다. 제조된 복합막의 투과도는 800 psi에서 약 $1.0m^3/m^2day$ 이상이었으며 이때 염배제율은 99.0% 이상이었다. 내염소성도 친수성기가 없는 폴리설폰 지지체를 사용한 복합막에 비하여 우수한 것으로 나타났다.

염소처리가 밀가루의 리올로지 특성에 미치는 영향 (Effect of Chlorine Treatment on the Rheological Properties of Wheat Flour)

  • 한명규;장학길;신효선
    • 한국식품과학회지
    • /
    • 제24권2호
    • /
    • pp.127-131
    • /
    • 1992
  • 밀가루의 리올로지 특성에 대한 염소처리의 영향을 연구하기 위하여 밀가루 100 파운드당 1, 2 및 4 oz의 액화염소가스를 각각 처리하여 각종 리올로지 특성의 변화를 비교하였다. Farinogram 특성에서 departure time, 수분흡수율, 안정도는 염소처리량 증가에 따라 점증적으로 증가하였으나 MTI는 감소하는 경향을 나타냈다. Extensogram 특성에서 염소처리하지 않은 밀가루는 신장도에 비하여 저항도가 큰 반면, 처리량이 1 oz와 2 oz는 적당한 신장도와 저항도를 갖고 있으므로 제빵에 적합한 반죽특성을 가졌다. Amylogram 특성에서 최고점도시 온도는 염소처리량 증가에 따라 거의 직선적으로 높아지는 경향을 나타냈다. 최고점도는 1 oz 처리시 다소 증가하였고 1 oz와 2 oz 처리는 처리량에 따른 변화는 없었다.

  • PDF

Experimental investigation of self-healing concrete after crack using nano-capsules including polymeric shell and nanoparticles core

  • Taheri, Mojtaba Naseri;Sabet, Seyyed Ali;Kolahchi, Reza
    • Smart Structures and Systems
    • /
    • 제25권3호
    • /
    • pp.337-343
    • /
    • 2020
  • In this paper, we focused on the self-healing concrete using new nano-capsules. Three types of nano-capsules with respect to availability, high strength and temperature tolerance are used; type 1 is URF and polyethylene (PE) as shell and nano titanium oxide (TiO2) as core, type 2 is URF and PE as shell and nano silica oxide (SiO2) as core, type 3 is PE as shell and nano silica oxide (SiO2) as core. The concrete samples mixed by nano-capsules with three percents of 0.5, 1 and 1.5. Based on experimental tests and the compressive strength of samples, the URF-PE-SiO2 is selected for additional tests of compressive strength before and after recovery, ultrasonic test, ion chlorine and water penetration depths. After careful investigation, it is concluded that the optimum value of URF-PE-SiO2 nano-capsules is 0.5% since leads to higher compressive strength, ultrasonic test, ion chlorine and water penetration depths.

박력분의 리올로지 특성에 대한 염소처리의 영향 (Effect of Chlorine Treatment on the Rheological Properties of Soft Wheat Flour)

  • 한명규;장영상;신효선
    • Applied Biological Chemistry
    • /
    • 제32권4호
    • /
    • pp.327-331
    • /
    • 1989
  • 염소 처리량에 따른 박력분의 백도 및 pH 그리고 리올로지 특성에 미치는 영향에 대해 실험하였다. 염소 처리한 것과 무처리한 박력분의 표백의 정도는 처리량이 2 oz./cwt.까지 표백효과가 있었으나 그 이상부터는 표백효과가 없었고, pH는 처리량 증가에 따라 점차적으로 낮아졌다. Farinogram 특성에서 염소처리량 증가에 따라 흡수율과 반죽의 안정도가 높아진 반면에 MTI값은 감소하였으며, valorimeter value는 일정하지 않았다. Extensogram 특성에서 저항도, 최대저항도 및 신장저항도는 90분과 135분 동안 방치했을때 무처리한 것이 가장 컸으며, 처리량 1 os./cwt.인 것이 가장 낮았으나 2 oz./cwt. 처리의 경우 그 값이 다시 증가하는 경향을 나타냈다. Amylogram의 최고점도와 최고점도시 온도는 처리량 증가에 따라 점증적으로 상승하였으며, 특히 4 oz./cwt. 처리의 경우 최고 점도가 1,160BU로 급격히 상승하였다.

  • PDF

수경재배에서 제설제 염소이온 농도에 따른 개운죽 (Dracaena braunii)의 생육반응 (Growth Response in Hydroponic Cultured Dracaena braunii Grown under Various Chloride Ion Concentrations)

  • 손혜미;박주영;윤용한;주진희
    • 한국환경과학회지
    • /
    • 제26권9호
    • /
    • pp.1081-1086
    • /
    • 2017
  • The present study was conducted for the purpose of analyzing the growth response of Dracaena braunii treated with chloride ions and to evaluate its salt tolerance. Distilled water (CON) was spiked with 1 (C1), 2 (C2), 5 (C5), 10 (C10) and 15 g/L (C15) $CaCl_2$, respectively. Acidity (pH) and electrical conductivity of hydroponic solution, and leaf width, leaf length, root length, number of leaves, fresh weight, dry weight and the water content of Dracaena braunii were measured. Acidity and electrical conductivity remarkably increased commensurate with increasing concentrations of $CaCl_2$. Growth in the C1 treatment was better than that in CON, whereas the C10 or C15 treatments caused either slow growth or withering of the plants. Fresh weight, dry weight and water content were significantly decreased in response to $CaCl_2$ concentration, compared with those in the control. These results showed that $CaCl_2$ concentration less than 1 g/L may be used as a hydroponic solution for D. braunii, as long as the water quality is not too saline. The chlorine ion has a negative effect on the growth.

A novel method of surface modification to polysulfone ultrafiltration membrane by preadsorption of citric acid or sodium bisulfite

  • Wei, Xinyu;Wang, Zhi;Wang, Jixiao;Wang, Shichang
    • Membrane and Water Treatment
    • /
    • 제3권1호
    • /
    • pp.35-49
    • /
    • 2012
  • In membrane processes, various agents are used to enhance, protect, and recover membrane performance. Applying these agents in membrane modification could potentially be considered as a simple method to improve membrane performance without additional process. Citric acid (CI) and sodium bisulfite (SB) are two chemicals that are widely used in membrane feed water pretreatment and cleaning processes. In this work, preadsorptions of CI and SB were developed as simple methods for polysulfone ultrafiltration membrane modification. It was found that hydrogen bonding and Van Der Waals attraction could be responsible for the adsorptions of CI and SB onto membranes, respectively. After modification with CI or SB, the membrane surfaces became more hydrophilic. Membrane permeability improved when modified by SB while decreased a little when modified by CI. The modified membranes had an increase in PEG and BSA rejections and better antifouling properties with higher flux recovery ratios during filtration of a complex pharmaceutical wastewater. Moreover, membrane chlorine tolerance was elevated after modification with either agent, as shown by the mechanical property measurements.

New High Recovery Membrane Modules for Desalination

  • Fujiwara, Nobuya
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 2002년도 제10회 하계 Workshop
    • /
    • pp.1-12
    • /
    • 2002
  • Desalination by reverse osmosis (RO), which first entered commercial use in the 1970s, was initially mainly used for treating brackish water. Technological progress led to the development of an RO membrane enabling single-pass seawater desalination. Toyobo succeeded in developing a single-pass seawater desalination RO module composed of hollow fiber type membranes made of cellulose triacetate in 1978, and then in 1979 began production of the first commercially available double-element module. This double-element module has many advantages suitable for seawater desalination. It has high chlorine tolerance and high salt rejection, derived from the properties of the membrane material, and it is highly resistant to fouling and scaling matters due to the unique flow pattern and fiber bundle configuration. These advantages help to explain why the Toyobo double-element module has been used so successfully at the many seawater desalination plants around the world. Since the 1980s, large plants capable of desalinating several tens of thousands of cubic meters a day have sprung up around the Mediterranean and In the Middle East. The Jeddah RO Phase I Plant, which has a capacity of 56, 800m$^3$/day, went into operation in 1989. In 1994, the same sized Phase II Plant came on stream, giving the plant a huge total capacity of 113, 600m$^3$/day. The plant constructor Mitsubishi Heavy Industries, Ltd. (MHI), and the RO membrane manufacturer Toyobo Co., Ltd. In 1998, the world's largest RO seawater desalination plant in operation, which has a capacity of 128, 000m$^3$/day and is run by Saudi Arabia's Saline Water Conversion Corporation (SWCC), went into operation at Yanbu. RO seawater desalination technology has thus already reached the stage of full-scale commercial use. In order to encourage its wider use, however, RO desalination needs to be made more economical by lowering construction and water treatment costs. Toyobo has therefore developed a new economical RO desalination system by a recovery ratio of 60% using a high-pressure module with a high product flow rate. In 2000, Toyobo high recovery membrane module was selected for the largest seawater desalination plant in Japan, which has a capacity of 50, 000m$^3$/day.

  • PDF

새로운 2-(5-Propargyloxyphenyl)-4,5,6,7-tetrahydro-2H-indazole의 합성과 제초활성 (Synthesis and herbicidal activities of 2-(5-Propargyloxyphenyl)-4,5,6,7-tetrahydro-2H-indazole and their related derivatives)

  • 전동주;박관용;김영미;김형래;송종환;황인택;유응걸
    • 농약과학회지
    • /
    • 제5권4호
    • /
    • pp.68-71
    • /
    • 2001
  • 고리형 이미드계 화합물 중에서 제초활성이 매우 좋은 것으로 알려진 S-275의 bicyclic 4,5,6,7-tetrahydro-indazole 부분의 염소 대신에 다른 여러 가지 작용기가 치환된 5종의 유도체들을 여러 경로를 통하여 합성하였고, 이들의 제초활성을 논조건에서 시험하였다. 대부분의 화합물의 제초활성은 매우 약하였으나, methylthio기가 치환된 유도체는 매우 강한 제초효과와 함께 벼에 대한 안전성은 S-275에 비해서 매우 개선된 결과를 보였다.

  • PDF

Disinfection of Fusarium-infected Rice Seeds by Prochloraz and Gaseous Chlorine Dioxide

  • Jeon, Young-ah;Lee, Young-yi;Lee, Ho-sun;Sung, Jung-sook;Lee, Seokyoung
    • 한국균학회소식:학술대회논문집
    • /
    • 한국균학회 2014년도 추계학술대회 및 정기총회
    • /
    • pp.25-25
    • /
    • 2014
  • Three species of Fusarium, F. fujikuroi, F. verticillioides and F. proliferatum, are known to be associated with bakanae disease of rice [1, 2]. F. fujikuroi infects rice flowers and survive in endosperm and embryo of the seeds. Infected seed is an important source of primary inoculum of pathogens [3]. Seeds of rice (Oryza sativa cv. Boramchan) collected from bakanae-infected field were found to be 96% infected with Fusarium sp., 52% with F. fujikuroi, 42% with F. verticillioides, and 12% with F. proliferatum as determined by incubation method and species-specific PCR assays. F. fujikuroi was detected at lemma/palea, endosperm and embryo whereas F. verticillioides and F. proliferatum were recovered only from lemma/palea by means of component plating test. Seed disinfection methods have been developed to control bakanae disease and prochloraz has been most widely used for rice seeds. Two chemicals formulated with prochloraz (PC 1) and prochloraz + hexaconazole (PC 2) that inhibit biosynthesis of ergosterol strongly reduced the incidence of Fusarium spp. on selective media to 4.7% and 2.0%, respectively. Disease symptoms of rice seedlings in nursery soil were alleviated by chemical treatment; seedlings with elongated leaves or wide angle between leaf and stem were strikingly reduced from 15.6 to 3.2% (PC 1) and 0 (PC 2), stem rots were reduced from 56.9 to 26.2% (PC 1) and 32.1% (PC 2), and normal seedling increased from 0.4 to 13.3% (PC 2). Prochloraz has some disadvantages and risks such as the occurrence of tolerant pathogens [4] and effects on the sterol synthesis in animals and humans [5]. For these reasons, it is necessary to develop new disinfection method that do not induce fungal tolerance and are safe to humans and animals. Chlorine dioxide ($ClO_2$), that is less toxic, produces no harmful byproducts, and has high oxidizing power, has been reported to be effective at disinfection of several phytopathogenic fungi including Colletotrichum spp. and Alternaria spp. [6]. Gaseous $ClO_2$ applied to rice seeds at a concentration of 20 ppm strongly suppressed mycelial growth of Fusarium fujikuroi, F. verticillioides and F. proliferatum. The incidence of Fusarium spp. in dry seed with 8.7% seed moisture content (SMC) tended to decrease as the concentration of $ClO_2$ increased from 20 to 40 ppm. Applying 40 ppm $ClO_2$ at 90% relative humidity, incidence was reduced to 5.3% and resulted in significant reduction of disease symptoms on MS media. In nursery soil, stem rot was reduced from 56.9 to 15.4% and the number of normal seedlings increased from 0.4 to 25.5%. With water-soaked seeds (33.1% SMC) holding moisture in the endosperm and embryo, the effectiveness of disinfection using $ClO_2$ increased, even when treated with only 20 ppm for four hours. This suggests that moisture was a key element for action of $ClO_2$. Removal of the palea and lemma from seeds significantly decreased the incidence of Fusarium spp. to 3.0%. Seed germination appeared to decrease slightly by water-soaking at $30^{\circ}C$ because of increased SMC and by physical damage of embryos from hulling. These results indicate that the use of gaseous $ClO_2$ was effective as a means to disinfect rice seeds infected with Fusarium spp. and that moisture around the pathogens in the seed was an important factor for the action of $ClO_2$. Further investigations should be conducted to ascertain the best conditions for complete disinfection of Fusarium spp. that infect deep site of rice seeds.

  • PDF