• 콘크리트학회논문집
• /
• 제24권5호
• /
• pp.553-558
• /
• 2012

대기 중의 비래염분은 해풍에 의해 내륙으로 이동되고 해안 인근 콘크리트 구조물의 표면에 부착하여 내부로 침투하게 된다. 비래염분 환경에 있는 콘크리트 구조물의 표면염분량은 비래염분량에 의해 영향을 받기 때문에 비래염분량의 분포 특성에 따라 표면염분량도 변화하는 경향이 있다. 따라서, 비래염분 환경 하의 구조물은 해수에 직접접하는 구조물과 달리 표면부의 염분량을 예측하기가 상대적으로 어렵고, 침투되는 경향 또한 다르기 때문에 이에 대한 결과를 얻는것은 중요하다고 할 수 있다. 따라서, 이 연구에서는 비래염분 환경에서 콘크리트 표면으로부터 내부로 침투하는 염분을 표면염분량과 침투 염분량으로 구분하여 그 특성을 파악하였다. 이를 위하여 콘크리트 시험체를 제작하여 해안 현장에서 옥외노출실험을 3년간 실시하였으며, 노출기간 1년과 2년, 3년차에서 시험체를 회수하여 표면염분량 및 표면으로부터 깊이별 비래염분 침투량을 분석하였다. 분석 결과, 콘크리트의 표면조도에 따라 표면염분량의 차이가 발생하였으며, 강우의 영향을 받지 않은 경우 더 많은 표면염분량이 존재하였다. 침투 염분량은 대기중의 비래염분량 및 노출기간에 따라 차이가 발생하였으며, 장기재령으로 갈수록 표면부보다 콘크리트 내부에서 많은 염분량을 나타내는 경향이 두드러졌다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권5호
• /
• pp.112-118
• /
• 2022

이 연구는 원전 안전성 관련 구조물의 콘크리트 배합설계를 이용하여 확산특성을 평가하였다. 원전안전성관련 콘크리트 구조물 중 해수에 침지되거나 간만대에 위치하는 취배수구조물의 배합을 선정하여 압축강도, 전기전도도에 의한 염소이온 침투저항성 평가, 염수침지를 통한 확산특성을 분석하였다. 원전 콘크리트 구조물의 설계기준강도인 91일까지 재령에 따라 1, 7, 14, 28, 56, 91일에 압축강도를 측정했으며, 재령 28, 91일에 염소이온 침투저항성 평가를 실시했다. 재령 28일 콘크리트 시험체를 28일간 염수에 침지한 뒤 깊이별 시료를 채취하여 염화물량을 분석함으로써 확산계수를 도출하였다. 결과적으로 보통포틀랜드시멘트를 100% 사용한 콘크리트보다 플라이애시가 20% 치환된 원전 콘크리트 배합이 28일 이후 장기적인 강도증진 효과가 더 높게 나타났다. 또한 원전콘크리트 배합이 보통포틀랜드시멘트를 100% 사용한 배합보다 염소이온 침투저항성이 높고 확산계수도 더 낮게 나타나 염해에 대한 저항성이 더 높은 것으로 나타났다.

• Advances in concrete construction
• /
• 제6권2호
• /
• pp.145-157
• /
• 2018

This paper presents a review on the use of Silica Fume (SF) as a mineral admixture in the concrete. Distinctive outcome from several researches have been demonstrated here, particularly emphasizing on the fresh and hardened properties of concrete when blended with Silica Fume (Micro-silica or Nano-silica). The results showed a substantial enhancement in the mechanical properties of concrete when replaced with SF. The review also presented a brief idea of percentage replacement of SF in case of normal and high-strength concrete. A decreasing trend in workability (slump value) has been identified when there is a increase in percentage replacement of SF. It can be concluded that the optimize percentage of replacement with SF lies in the range of 8-10% particularly for compressive strength. However the variation of blending goes up to 12-15% in case of split tensile and flexure strength of concrete. The study also demonstrates the effect of silica fume on durability parameters like water absorption, permeability, sulphate attack and chloride attack.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.433-436
• /
• 2008

Silicate계 표면보호재는 Sodium silicate 혹은 Lithium 및 Potassium silicate를 주성분으로 하는 수용액이며 탄산화한 부분의 알칼리 부여와 성능저하가 예상되는 부위의 강화 등 콘크리트 성능회복에 주로 이용된다. Silicate계는 콘크리트에의 침투성을 향상시키기 위해 계면활성제나 콘크리트 중의 Calcium hydroxide와의 반응을 개선하기 위한 반응촉진제, 경화제 등이 첨가된다. Sodium silicate계는 습윤 바탕에 적용하며 Lithium silicate계는 건조바탕에 도포하여 양생을 실시하는 것이 일반적이다. 콘크리트 구조물 외관의 손상없이 비교적 간편하게 시공할 수 있으며 미세기공을 완전하게 메우지 않으므로 콘크리트 본래의 호흡성을 손상하지 않는다. 본 연구에서는 콘크리트 침투성 표면보호재로서 가격이나 시공성에서 우수한 Lithium 및 Potassium silicate를 이용하여 부유 오염원 제거를 위한 친수성 표면형성과 상온경화가 가능한 표면보호재를 제조하였으며, 제조된 표면보호재의 탄산화 저항성 및 Cl- 침투저항성, 동결융해 저항성 등의 내구성능에 대해 검토하고자 한다.

• 한국세라믹학회지
• /
• 제45권11호
• /
• pp.719-724
• /
• 2008

Every concrete structure should continue to perform its intended functions such as to maintain the required strength and durability during its lifetime. Deterioration of the concrete structure, however, occurs more progressively from the outside of the concrete exposed to severe conditions. Main deteriorations in concrete structures result from carbonation, chloride ion attack and frost attack. Concrete can therefore be more durable by applying surface protection to increase its durability using impregnants, which are normally classified into two large groups in polymeric and silicate materials. Concrete impregnants are composed of silanes and alkali silicates (sodium, potassium and lithium silicate). Thus, this study is concerned with elevating the carbonation and Cl- penetration resistance of concrete structures by applying alkali silicate hydrophilic impregnants including lithium and potassium silicates. From the experimental test results, lithium and potassium silicates produced a good improvement in carbonation resistance and are expected to be used as hydrophilic impregnants of concrete structures.

• Advances in concrete construction
• /
• 제10권3호
• /
• pp.237-245
• /
• 2020

Past research efforts already established geopolymer as an environment-friendly alternative binder system for ordinary Portland cement (OPC) and recycled aggregate is also one of the promising alternative for natural aggregates. In this study, an effort was made to produce eco-friendly mortar mixes using geopolymer as binder and recycled fine aggregate (RFA) partially and study the resistance ability of these mortar mixes against the aggressive environments. To form the geopolymer binder, 70% fly ash, 30% ground granulated blast furnace slag (GGBS) and alkaline solution comprising of sodium silicate solution and 14M sodium hydroxide solution with a ratio of 1.5 were used. The ratio of alkaline liquid to binder (AL/B) was also considered as 0.4 and 0.6. In order to determine the resistance ability against aggressive environmental conditions, acid attack test, sulphate attack test and rapid chloride permeability test were conducted. Change in mass, change in compressive strength of the specimens after the immersion in acid/sulphate solution for a period of 28, 56, 90 and 120 days has been presented and discussed in this study. Results indicated that the incorporation of RFA leads to the reduction in compressive strength. Even though strength reduction was observed, eco-friendly mortar mixes containing geopolymer as binder and RFA as fine aggregate performed better when it was produced with AL/B ratio of 0.6.

• Computers and Concrete
• /
• 제8권2호
• /
• pp.177-192
• /
• 2011

This research paper aims at computer based modeling of carbonation induced corrosion under extreme conditions and its experimental verification by incorporating enhanced electrochemical and mass balance equations based on thermo-hygro physics with strong coupling of mass transport and equilibrium in micro-pore structure of carbonated concrete for which the previous research data is limited. In this paper the carbonation induced electrochemical corrosion model is developed and coupled with carbon dioxide transport computational model by the use of a concrete durability computer based model DuCOM developed by our research group at concrete laboratory in the University of Tokyo and its reliability is checked in the light of experiment results of carbonation induced corrosion mass loss obtained in this research. The comparison of model analysis and experiment results shows a fair agreement. The carbonation induced corrosion model computation reasonably predicts the quantitative behavior of corrosion rate for normal air dry relative humidity conditions. The computational model developed also shows fair qualitative corrosion rate simulation and analysis for various pH levels and coupled environmental actions of chloride and carbonation. Detailed verification of the model for the quantitative carbonation induced corrosion rate computation under varying relative conditions, different pH levels and combined effects of carbonation and chloride attack remain as scope for future research.

• International Journal of Concrete Structures and Materials
• /
• 제6권3호
• /
• pp.145-153
• /
• 2012

The aim of this study is to explore the possibility of re-cycling a waste material that is now produced in large quantities, while achieving an improvement of the mechanical properties and durability of the mortar. This study examines the mechanical properties and the durability parameters of mortars incorporating plastics bag wastes (PBW) as fine aggregate by substitution of a variable percentage of sand (10, 20, 30 and 40 %). The influence of the PBW on the, compressive and flexural strength, drying shrinkage, fire resistance, sulfuric acid attack and chloride diffusion coefficient of the different mortars, has been investigated and analyzed in comparison to the control mortar. The results showed that the use of PBW enabled to reduce by 18-23 % the compressive strength of mortars containing 10 and 20 % of waste respectively, which remains always close to the reference mortar (made without waste). The replacement of sand by PBW in mortar slows down the penetration of chloride ions, improves the behavior of mortars in acidic medium and improves the sensitivity to cracking. The results of this investigation consolidate the idea of the use of PBW in the field of construction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.237-240
• /
• 2005

As a part of the effort for improving the durability design based on a set of the deem-to-satisfy specifications, it is important and primary to quantitatively identify the environmental impact to a target reinforced concrete structure. In this work, an effort is made to quantitatively calculate the environmental affecting factor with using a fuzzy inference that it indicates the severity of environmental impact to the exposed reinforced concrete structure or member. This system is composed of input region, output region and rule base. For developing the fuzzy inference system surface chloride concentration{chloride), cyclic degree of wet and dry(CWD), relative humidity(RH) and temperature (TEMP) were selected as the input parameter to environmental affecting factor(EAF) of output parameter. The Rules in inference engine are generated from the engineering knowledge and intuition based on some international code of practises as well as various researcher's experimental data. The devised fuzzy inference system was verified comparing the inferred value with the investigation data, and proved to be validated. Thus it is anticipated that this system for quantifying EAF is certain to be considered into the starting point to develop the performance-based durability design considering the service life of structure.

• Bulletin of the Korean Chemical Society
• /
• 제19권11호
• /
• pp.1211-1216
• /
• 1998

Bis(diethyldithiocarbamato)ioxomolybdenum(VI), cis-MoO2(S2CNEt2)2, 1, reacted with chlorotrimethylsilane (Me33SiCl) to give a seven-coordinate, pentagonal bipyramidal complex MoOC12(S2CN]Et2)2, 3, in which the oxo ligand is trans to the chloride ligand and the two chloride ligands are mutually cis. The monooxo molybdenum complex bis(diethyidithiocarbamato)oxomolybdenum(IV), MoO(S2CNEt2)2, 2, reacted with phenyl isocyanate (PhNCO) to give an Mo dimer MO2{μ-N(CONPh)Ph}(μ-NPh)(NPh)2(S2CNEt2)2, 4, which contains an Mo-Mo bond, two diethyldithiocarbamato ligands, two terminal imido (NPh) ligands, and two bridging hnido (NPh) ligands. One of the two bridging NPh ligands seemed to have been attacked by the electrophilic phenyl isocyanate carbon, which suggests that the bridging imido NPh ligand is more nucleophilic than the terminal one. Crystallographic data for 3: monoclinic space group P21/c, a=8.908(l) Å, b=17.509(3) Å, c=12.683(2) Å, β=110.15(1)°, Z=4, R(wR2)=0.0611(0.1385). Crystallographic data for 4-THF: orthorhombic space group P212121, a=17.932(4) Å, b=22.715(5) Å, c=11.802(3) Å, Z=4, R(wR2)=0.0585(0.1286).