• 한국건축시공학회지
• /
• 제4권4호
• /
• pp.95-101
• /
• 2004

The purpose of this paper is to compare free-chloride content with water-soluble chloride in blast furnace cement(BSC) paste. The content of free-chloride in cement paste measured by pore solution analysis and water-soluble chloride measured by ASTM. The result of this study are as follows: 1. The concentration of chloride ion in pore solution of BSC-solidified matrix is almost as low as 43-71% compared to that of OPC-solidified matrix containing the same chloride content in cement paste. 2. The binding capacity of specimens, OPC Pl-P5, are 93.5-77%, but the binding capacity of specimens, BSC Pl-P5 are 97.1-86.1%, which is to be as high as 2-9.1% compared to OPC containing the same chloride content. 3. In terms of water-soluble chloride content in BSC paste are 15-31.7 percent of chloride addition but free-chloride content in pore solution are 2.9-13.9 percent of chloride addition. The free-chloride content in pore solution is 19.3-43.8 percent lower for the water-soluble chloride content in cement paste.

• 한국식품영양과학회지
• /
• 제33권9호
• /
• pp.1486-1491
• /
• 2004

식품오염 관련 중금속들의 에스트로겐성을 in vitro 와 in vivo 분석방법을 병행하여 평가하였다. 분석방법은 1) estrogen receptor dependent transcriptional expression 분석법, 2) E-screen assay 그리고, 3) 마우스 자궁비대시험 (uterotropic assay)을 사용하였다. 시험에 사용한 물질로는 $17\beta$-estradiol, diethylstilbestrol(DES), arsenic oxide, bis (tri-n-butyltin), cadmium chloride, chromium chloride, lead acetate, mercuric chloride을 사용하였다. Estrogen receptor dependent transcriptional expression 분석 결과, bis(tri-nbutyltin) > cadmium chloride > chromium chloride 순으로 에스트로겐성이 크게 나타났으며, mercuric chloride, lead acetate, arsenic oxide는 거의 나타나지 않았다. E-screen test 결과, bis(tri-n-butyltin) > cadmium chloride > chromium chloride 순으로 에스트로겐성이 크게 나타났으며, mercuric chloride, lead acetate, arsenic oxide는 거의 나타나지 않았다. 자궁비대시험 결과도 마찬가지로 bis(tri-nbutyltin), cadmium chloride, chromium chloride은 자궁중량 비대를 크게 초래하였으며, 반면에 mercuric chloride, lead acetate, arsenic oxide는 그러한 효과가 미약하거나 없었다. 세 분석방법 결과 bis(tri-n-butyltin), cadmium chloride, chromium chloride 순으로 에스트로겐성이 크게 나타났다. 이러한 결과는 최근 bis(tri-n-butyltin)과 cadmium chloride이 에스트로겐성이 있다는 다른 연구결과들과 잘 일치하며, 또한 크롬화합물도 에스트로겐성이 있다는 것을 새롭게 제시하고 있다. 본 연구는 세 단계 수준(전사활성화단계, 세포증식작용, in vivo assay)의 분석을 병행함으로써 수많은 중금속의 에스트로겐성을 효과적으로 평가할 수 있다는 것을 제시해주고 있다.

• 한국산업보건학회지
• /
• 제3권1호
• /
• pp.91-98
• /
• 1993

This study was carried out to investigate characteristic of vinyl chloride emissioned from poly vinyl chloride extrusion process and to evaluate the efficiency of local exhaust ventilation system. Before local ventilation facility was constructed in poly vinyl chloride extrusion process, the average worker exposure to vinyl chloride was 3.15 ppm, which exceeded Threshold Limit Value of American Conference of Gorvernmental Industrial Hygienists (ACGIH-TLV), 1 ppm. lt is possible that vinyl chloride residues in the poly vinyl chloride resin was released or degased due to extrusion heat. The larger the width of vinyl tube become, the higher worker exposure to vinyl chloride was. It is estimated that vinyl chloride from vinyl chloride resin increased as amount of poly vinyl chloride resin extruded in the extrusion process increased. Canopy hood was an appropriate type for poly vinyl chloride resin extrusion process. This local exhaust ventilation has fan static pressure of 7.65 inch wg($190mmH_2O$, total volumetric flowlate of 4,796 CFM ($135.8m^3$/min) and fan power requirement of 12 hp (8.952 Kw). After this local exhaust ventilation was constructed there, the average concentration of worker exposure to vinyl chloride was reduced to be 0.46 ppm, which was below the Threshold Limit Value, 1 ppm. Also, the removal efficiency rate of vinyl chloride attained by local exhaust ventilation was 85.3%. It was a statistically significant (p<0.01).

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.233-241
• /
• 2021

A series of three bench-scale experiments was performed to investigate the conversion of sodium metal to sodium chloride via reactions with non-metal and metal chlorides. Specifically, batches of molten sodium metal were separately contacted with ammonium chloride and ferrous chloride to form sodium chloride in both cases along with iron in the latter case. Additional ferrous chloride was added to two of the three batches to form low melting point consolidated mixtures of sodium chloride and ferrous chloride, whereas consolidation of a sodium-chloride product was performed in a separate batch. Samples of the products were characterized via X-ray diffraction to identify attendant compounds. The reaction of sodium metal with metered ammonium chloride particulate feeds proceeded without reaction excursions and produced pure colorless sodium chloride. The reaction of sodium metal with ferrous chloride yielded occasional reaction excursions as evidenced by temperature spikes and fuming ferrous chloride, producing a dark salt-metal mixture. This investigation into a method for controlled conversion of sodium metal to sodium chloride is particularly applicable to sodium containing elevated levels of radioactivity-including bond sodium from nuclear fuels-in remote-handled inert-atmosphere environments.

• Computers and Concrete
• /
• 제13권6호
• /
• pp.695-707
• /
• 2014

This study investigated the chloride binding isotherms of various cement types, especially the contributions of C-S-H and AFm hydrates to the chloride binding isotherms were determined. Ordinary Portland cement (OPC), Modified cement (MC), Rapid-hardening Portland cement (RHC) and Low-heat Portland cement (LHC) were used. The total chloride contents and free chloride contents were analyzed by ASTM. The contents of C-S-H, AFm hydrates and Friedel's salt were determined by X-ray diffraction Rietveld (XRD Rietveld) analysis. The results showed that OPC had the highest chloride binding capacity, and, LHC had the lowest binding capacity of chloride ions. MC and RHC had very similar capacities to bind chloride ions. Experimental equations which distinguish the chemically bound chloride and physically bound chloride were formulated to determine amounts of the bound chloride basing on chloride binding capacity of hydrates.

• 한국식품영양과학회지
• /
• 제32권8호
• /
• pp.1233-1238
• /
• 2003

Chloride염 및 유기산 칼슘염을 농도별로 첨가하여 배양할 때 6종의 식중독 미생물에 대한 증식 억제 효과를 Bioscreen C(600 nm)를 이 용하여 시험 하였다. E. cereus는 sodium chloride 7% 또는 potassium chloride 9% 처리시 증식이 관찰되지 않았다. Calcium chloride는 3% 농도에서 E. coli O157:H7과 S. aureus의 증식이 관찰되지 않았다. Magnesium chloride는 5% 농도에서 B. cereus, S. Typhimurium 및 S.aureus의 증식을 억제하였다. 유기산 칼슘염의 식중독 미생물에 대한 증식 억제 효과는 calcium propionate>calcium acetate>calcium lactate 순으로 나타났다. S. Typhimurium은 calcium chloride 단독 처리 할 때는 5% 이상 농도에서 증식이 관찰되지 않았으나, calcium chloride 3%와 젖산 0.01%를 병용할 때 같은 효과가 나타나 단독 사용할 때 보다 병용에 따른 상승효과가 큰 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.276-277
• /
• 2017

Deicing agent affect concrete durability such as scaling, rebar corrosion strength of concrete. In this study, developed deicing agent satisfied with EL610 is evaluated to compare affects to concrete with no deicing agent and chloride-containing deicing agents. Deicing agents are applied to concrete surface during four months twice a week. Chloride content, chloride penetration depth and concrete strength are evaluated. After experiment, chloride content, chloride penetration depth of concrete are as follows. Chloride-containing deicing > Eco friendly deicer > No deicing agents. Concrete strength are also as follows. Chloride-containing deicing > Eco friendly deicer > No deicing agents. From experiment, developed deicing agent shows low chloride content in concrete and affect concrete strength little lower than chloride-containing deicing.

• 콘크리트학회논문집
• /
• 제14권5호
• /
• pp.789-795
• /
• 2002

개정된 콘크리트 표준시방서에 허용된 양의 염화물 이온 및 제염되지 않은 해사를 잔골재로 사용할 경우 콘크리트 배합시 혼입될 염화물 이온의 거동과 고정화율을 평가하기 위해 시멘트 페이스트 내 세공용액을 추출하여 분석한 실험을 통해 얻은 결론은 다음과 같다. 1 재령에 따른 세공용액 내 염화물 이온 농도는 수화 진행에 따라 수화생성물에 흡착되는 염화물량의 증가로 재령이 증가하면서 감소하는 것으로 나타났으며, 세공용액 내 측정 염화물량을 고정화되지 않은 염화물로 보고 혼합수의 농도와 비교할 경우 재령 49일의 고정화율은 64~90%였다. 2. 증발수량으로 측정한 세공용액량을 기준으로 시멘트 내 염화물 고정화율을 산정한 결과 염화물 혼입량이 시멘트 중량의 0.046~0.16%로 비교적 적은 PI~P3의 경우 염화물 고정화율이 91.8~93.5%에 이르나 염화물 혼입량이 시멘트 중량의 0.3% 인 P4의 경우 89.1 %로 낮아지며, 시멘트 중량에 대해 0.617%의 염화물이 혼입된 PS는 혼입된 염화물 중 77%만이 고정화되었다. 3. 시멘트 중량에 대한 염화물 고정화율은 혼입량에 따라 0.015~0.475%로 나타났다. 이 중 시멘트 중량에 대해 0.091% 이상의 염화물 이온이 혼입될 경우 염화물 혼입량이 2배씩 증가함에도 염화물 고정화량은 1.7~l.8배 증가하고 있어 시멘트 중량에 대한 고정화율도 혼입량이 증가할수록 낮아졌다. 4. 염화물 혼입량이 증가함에 따라 염화물의 고정화율은 증가하지만 고정화되지 못하고 세공용액 중에 남아있는 염화물의 절대량도 크게 증가하였다.

• 동아시아식생활학회지
• /
• 제4권3호
• /
• pp.123-133
• /
• 1994

The ground pork patties were made to add two level of sodium chloride(2.5%, 3.0%) and replace part(50%) of the sodium chloride(NaCl) with either potassium chloride(KCl), magnesium chloride(MgCl2) or calcium chloride(CaCl2). These samples were analyzed for their chemical composition, VBN value, TBA value, microbial counts, and cooking loss. The ground pork with NaCl 2.5% was more desirable in saltness than the ground pork with NaCl 3.0%. Replacing 50% of the sodium chloride with potassium chloride was more desirable to flavor, color, juiciness, and overall acceptability than replacing 50% of the sodium chloride with either magnesium chloride or calcium chloride. The ground pork with NaCl 2.5% or NaCl 1.25% ＋KCI 1.60% had higher pH value than the ground pork with NaCl 1.25% ＋MgCl2 0.67% or NaCl 1.25% ＋CaCl2 0.79%. The ground pork with the ground pork with NaCl 2.5% had lower VBN value than the ground pork with either NaCl 1.25%＋KCI 1.60%, NaCl 1.25% ＋ MgCl2 0.67%, or NaCl 1.25% ＋CaCl2 0.79%. The ground pork with NaCl 1.25% ＋ CaCl2 0.67% had higher increase in total colony count than the ground pork with NaCl 2.5% or NaCl 1.25% ＋ CaCl2 0.79%. Cooking loss of ground pork with NaCl 2.5% was lowest and cooking loss of ground pork with NaCl 1.25% ＋ KCl 1.60% was highest. Potassium chloride would not be a substitute for sodium chloride in cooking loss and total colony count but potassium chloride more closely approximated the sensory properties of sodium chloride than either magnesium chloride or calcium chloride.

• 한국염색가공학회지
• /
• 제33권2호
• /
• pp.72-78
• /
• 2021

The purpose of this study, the purpose of this study is to activate the antibacterial effect on the Chlorinated polyvinyl chloride film by using Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride antibacterial agent with Chlorinated polyvinyl chloride polymer, which is inexpensive and has excellent properties such as heat resistance and chemical resistance. The Chlorinated polyvinyl chloride polymer was dissolved in a dimethylacetamide solvent, and film samples were prepared by varying the ratio of Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride to study the antibacterial performance. A Scanning Electron Microscope-Energy Dispersive X-ray Spectrometer and X-ray photoelectron spectroscopy were employed to confirm the elements in the samples. According to the initial decomposition temperature of the Chlorinated polyvinyl chloride film and the Chlorinated polyvinyl chloride/Octadecyldimet hyl (3-triethoxy silylpropyl) ammonium chloride(10%) film using a Thermogravimetric analyzer(TA-DTA), it was confirmed that the initial decomposition temperature was lowered due to the influence of Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride. In addition, in order to measure the mechanical properties, Universal testing machine was used and the result showed that a strength of Chlorinated polyvinyl chloride/Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride(10%) was 36.8 MPa. The antimicrobial properties of the Chlorinated polyvinyl chloride/Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride(10%) film showed 99.9% antimicrobial properties.