• Mycobiology
• /
• v.36 no.4
• /
• pp.249-254
• /
• 2008

Minimal growth inhibitory concentrations (MICs) of chitosan acetate (M.W. 60 kDa) on heterotrophic bacteria (strains MK1, S, and R) isolated from the soft-rotten tissues of Neungee mushroom (Sarcodon aspratus) were measured. The slimy substance produced by the MK1 strain was responsible for the diseased mushroom’s appearance. The S and R strains were members of the Burkholderia cepacia complex. These strains showed different levels of susceptibility toward chitosan acetate. The MIC of chitosan acetate against the MK1 and S strains was 0.06%. The MIC against the R strain was greater than 0.10%. Survival fractions of the MK1 and S strains at the MIC were $3\;{\times}\;10^{-4}$ and $1.4\;{\times}\;10^{-3}$ after 24 h, and $2\;{\times}\;10^{-4}$ and $7\;{\times}\;10^{-4}$ after 48 h, respectively. Survival fractions of the R strain after 24 and 48 hr at 0.1% chitosan acetate were $1\;{\times}\;10^{-2}$ and $6.9\;{\times}\;10^{-3}$, respectively. Compared to the MK1 and S strains, the low susceptibility of the R stain towards chitosan acetate could be due to the ability of the R strain to utilize chitosan as a carbon source. Thirty-eight percent of Neungee pieces treated in a 0.06% chitosan acetate solution for $2{\sim}3$ second did not show any bacterial growth at 4 days, whereas bacterial growth around untreated mushroom pieces occurred within 2 days. These data suggest that chitosan acetate is highly effective in controlling growth of indigenous microorganisms on Neungee. The scanning electron micrographs of the MK1 strain treated with chitosan revealed a higher degree of disintegrated and distorted cellular structures.

• Archives of Pharmacal Research
• /
• v.10 no.2
• /
• pp.88-93
• /
• 1987

Chitosan ($\beta$-D-glucosaminan) is chemically prepared from chitin (N-acetyl-$\beta$- D-glucosaminan) which is an unutilized natural resource. We now report on the suitability of the chitosan matrix for use as vehicles for the controlled release of drugs. Salicylic acid and aspirin were used as model drugs in this study. The permeation of salicylic acid in the chitosan membranes was determined in a glass diffusion cell with two compartments of equal volume. Drug release studies on the devices were conducted in a beaker containing 5% sodium hydroxide solution. Partition coefficient (Kd) value for acetate membrane (472) is much greater than that for fluoro-perchlorate chitosan membrane (282). Higher Kd value for acetate chitosan membrane appears to be inconsisstent with the bulk salicylic acid concentration. The permeability constants of fluoro-perchlorate and acetate chisotan membranes for salicylic acid were 3.139 ${\times}10^{-7}cm^2$ min up to 60 min and that of 30% aspirin in the devices was 4.739${\times}10^{-7}cm^2$sec upto 60 min. As the loading dose of aspirin in a chitosan device increased, water up-take of chitosan device increased, but in case of salicylic acid it decreased. The release rate increased with increase in the molecular volume of the drugs. Thses result suggest that the release mechanism may be controlled mainly by diffusion through pores.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.4
• /
• pp.397-400
• /
• 1995

Effects of rheological parameters, such as shear rate, temperature, concerntration, salts on the apparent viscosity of chitosan(deacetylation degree: $84\%$, Mw: 267,000) dissolved in acetate buffer(pH 4.5) were investigated. Rheologiral properties of chitosan solution from cuticle of red snow crab (Chinonecetes japonicus) are as follows. $0.5\%$ chitosan in 0.1M acetate buffer (pH 4.5) solution showed Bingham flow having hysteresis loop. It's flow equation was $\sigma=0.757+19.6_\gamma(r^2=0.99)$. The viscosity of chitosan solution is exponentially increased with its concentration, and showed Arrhenius dependence with respect to the temperature $(10^{\circ}C-40^{\circ}C).$ When various salts were added to chitosan solution, the viscosity decreased as the concentration of counterion increased. But the type ot counterions itself does not have any significant effects on the viscosity.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.6
• /
• pp.843-848
• /
• 1996

As the first step of studies related to production of chitooligosaccharides by physical methods, chitosan solution were sonicated with 20 kHz and various treatment effects were examined to present fundamental data of sonicated chitosan solution. Intrinsic viscosity of chitosan solution sharply decreased from 3.76 dl/g to 2.90 dl/g until 5 minutes of sonication and then slowly decreased. With low volume of chitosan solution, sonication was very effective and temperature of chitosan solution slightly affected the efficiency of sonication. In case of changing the solvent, no significant differences were observed on the effect of sonication, however, acetate buffer had highest sonication effect among various solvents. The sonication effect was increased as the increasement of the value of pH, on the contrary, ionic strength and type of counterions showed no effect on sonication. With these results, we assumed that optimal sonication treatment would be as follows, solution volume was $10\~20\;ml$, temperature range was $20\~30^{\circ}C$, pH value of solution was 4.5 and type of solvent was acetate buffer.

• Archives of Pharmacal Research
• /
• v.25 no.6
• /
• pp.964-968
• /
• 2002

Colon drug delivery is advantageous in the treatment of colonic disease and oral delivery of drugs unstable or suceptible to enzymatic degradation in upper GI tract. In this study, multilayer coated system that is resistant to gastric and small intestinal conditions but can be easily degraded by colonic bacterial enzymes was designed to achieve effective colon delivery of prednisolone. Variously coated tablets containing prednisolone were fabricated using chitosan and cellulose acetate phthalate (CAP) as coating materials. Release aspects of prednisolone in simulated gastrointestinal fluid and rat colonic extracts (CERM) were investigated. Also, colonic bacterial degradation study of chitosan was performed in CERM. From these results, a three layer (CAP/Chitosan/CAP) coated system exhibited gastric and small intestinal resistance to the release of prednisolone in vitro most effectively. The rapid increase of prednisolone in CERM was revealed as due to the degradation of the chitosan membrane by bacterial enzymes. The designed system could be used potentially used as a carrier for colon delivery of prednisolone by regulating drug release in stomach and the small intestine.

• Textile Coloration and Finishing
• /
• v.19 no.4
• /
• pp.10-17
• /
• 2007

Chitosan(CS) and cellulose acetate(CA) composite films were prepared using formic acid as a cosolvent by casting, solvent evaporating and neutralization method. This study examines if the blending method, which uses formic acid as a cosolvent is efficient in improving the mechanical properties of CS film, especially wet strength and elongation. Formic acid is an effective cosolvent for the blend of CS and CA. Under wet condition, tensile strength and elongation of the composite films were obviously higher than those of the films made from pure CS. FTIR, DSC, and X-ray diffraction showed that the composite films exhibit a high level of compatibility and that strong interaction between the CS and CA was caused by intermolecular hydrogen bonding. The affinity series of composite film to transition metal ions are Cu(II) > Cd(II) > Cr(III). The adsorption of Cu((II) ion was shown to be highly pH sensitive.

• Applied Microscopy
• /
• v.32 no.3
• /
• pp.205-211
• /
• 2002

The purpose of this study was to evaluate the effect the lead toxicity of chitosan on the rats. A healthy male of Wistar rat was used for experiment. The lead acetate (30 mg/kg, Pb) was injected two times per a week into the abdomen. 0.1% chitosan solution (1 mg/ml) was supplied by feeding ad libitum. After 4 or 8 weeks, we was observed kidney by electron microscope. The experimental groups were divided into two groups. Group 1 was control group which was not treated with chitosan solution after contaminatation of lead acetate. Group 2 was experimental group which was treated with chitosan solution after contamination of lead acetate. All groups were used to 10 rats. The results were as follow: On the proximal convoluted tubules of the group with only Pb, the number of microvillis were decreased and the number of lysosomes were increased on the cytoplasm. The mitochondria and rough endoplasmic reticulum were extended and ribosomes dropped from the rough endoplasmic reticulum. On the proximal convoluted tubules of the group with Pb-chitosan, the shapes and number of microvilli were not changed and the number of lysosomes were decreased. The shapes of mitochondria and endoplasmic reticulum observed not changes. We concluded that chitosan has effect on reducing toxicity of lead in the rat kidney.

• Proceedings of the Korean Fiber Society Conference
• /
• 1990.06a
• /
• pp.10-11
• /
• 1990

• Food Science of Animal Resources
• /
• v.30 no.4
• /
• pp.674-684
• /
• 2010

The effects of ascorbic acid (AA) alone or in combination with sodium acetate/calcium lactate (AA+SACL) and chitosan (AA+CH) on the physicochemical properties and microbial growth of beef and pork patties stored at $5^{\circ}C$ were investigated. The patties were case-ready packed in an air-containing polypropylene (PP) tray and sealed with polyethylene terephthlate (PETP)/casted polypropylene (CPP) top film. Treatments with AA, AA+SACL and AA+CH were effective in inhibiting total aerobic bacteria from day 4 compared to the control. In general, thiobarbituric acid, volatile basic nitrogen, and hue values in treated samples were lower than the control over the storage, whereas Hunter ${\alpha}^*$ (redness) values and sensory scores for surface color and off-odor were higher. Regarding quality and shelf-life extension, ground beef and pork patties treated with AA+SACL produced the most desirable results among all treatments during storage.

• Textile Coloration and Finishing
• /
• v.17 no.5 s.84
• /
• pp.26-36
• /
• 2005

This study was carried to evaluate mechanical characteristics of Poly(ethylene terephthalate) fabrics (by Kawabata evaluation system(KES)) which was systematically treated with $O_2$ low temperature plasma and chitosan acetate solution. Furthermore, surface structure was investigated by SEM, AFM, air permeability and wettability. Tensile energy(WT), shear rigidity(G) and surface roughness(MIU) properties calculated by KES-FB have increased with increasing plasma treatment time, while bending rigidity(G) and energy of compression(WC) value were decreased compared with those of the untreated. SEM photographs showed the identification of chitosan coating but did not confirm the plasma etching structure. Air permeability was decreased according to plasma treatment time with increasing concentrations of chitosan. The water absorption rate made rapid progress by chitosan treatment.