• 제목/요약/키워드: Chirp signal

검색결과 143건 처리시간 0.024초

고해상도 영상 레이다의 광대역 첩 신호 파형 발생 시뮬레이션과 성능 분석 (Wideband Chirp Waveform Simulation and Performance Analysis for High Range Resolution Radar Imaging)

  • 곽영길
    • 한국항행학회논문지
    • /
    • 제6권2호
    • /
    • pp.97-103
    • /
    • 2002
  • 고해상도 영상레이다에서 초광대역 파형 처리기술은 정밀 표적 식별을 위해서 매우 중요하다. 본 논문에서는 영상 레이다의 거리 분해능을 초 고해상도로 향상시킬 수 있는 방법으로서, 송신 펄스의 첩 변조 파형을 모듈방식으로 확장하여 광대역의 송신 파형을 얻을 수 있는 레이다 첩 파형 설계 기법에 대하여 논한다. 먼저 디지털 첩 신호발생 원리와 광대역 첩 신호 파형을 얻기 위한 신호대역 연결 및 분리 기법을 제시한다. 그리고, 영상 레이다의 거리 해상도 성능분석을 위하여 발생시킨 광대역 신호 파형 발생과 복원과정을 시뮬레이션을 통하여 성능 결과를 제시한다.

  • PDF

Characteristics of Compensation for Distorted Optical Pulse with Initial Frequency Chirp in 3 X 40 Gbps WDM Systems Adopted Mid-Span Spectral Inversion

  • Lee, Seong-Real;Lee, Yun-Hyun
    • Journal of electromagnetic engineering and science
    • /
    • 제3권2호
    • /
    • pp.79-85
    • /
    • 2003
  • In this paper, we investigated the degree of compensation for distorted optical pulse of wavelength division multiplexed(WDM) channel with initial frequency chirp generated in optical transmitter. The WDM channel signal distortion is due to chromatic dispersion, self phase modulation(SPM) and cross phase modulation(XPM) in fiber. The considered system is 3 ${\times}$ 40 Gbps intensity modulation direct detection(IM/DD) WDM transmission systems, which adopted mid-span spectral inversion(MSSI) as compensation method. We confirmed that the effect of initial frequency chirp on compensation for signal distortion due to a SPM is gradually decreased as a dispersion coefficient of fiber becomes gradually small. But, in the aspect of a compensation for signal distortion due to both SPM and XPM, the effect of initial frequency chirp on compensation is gradually decreased as a dispersion coefficient of fiber becomes gradually large.

AOD/CCD를 이용한 합성개구면 레이다 처리기에 관한 연구 (A Study on the Synthetic Aperture Radar Processor using AOD/CCD)

  • 박기환;이영훈;이영국;은재정;박한규
    • 한국통신학회논문지
    • /
    • 제19권10호
    • /
    • pp.1957-1964
    • /
    • 1994
  • 본 논문에서 CW(Continuos Wave) 레이저를 광원으로 사용하고 음향 광 소자(Acousto-Optic Device:AOD)의 공간 적분이론 및 CCD(Change Coupled Device)의 시간 적분이론을 이용하여 실 시간 처리가 가능한 합성 개구면 레이다(Synthetic Aperture Radar;SAR)처리기 시스템을 구현하였다. 제안된 시스템의 장점은 구동회로가 요구되지 않는다. 제안된 SAR 처리기 시스템은 선형 주파수 변조 신호(chirp)를 레이다 신호로 사용하였으며, 단위 표적에 대한 수신 데이타는 1차원 데이타로서 Z 80 보드와 전자회로를 이용하여 제작하였다. 또한 CW레이저를 사용함에 따라 발생되는 chirp 촛점화의 유동(smear)현상을 방지하기 위하여 AOD의 Brag 회절 각도를 이용하여 광원을 펄스화 하였으며, 제작한 chirp 신호는 펄스와 동기를 맞추어 구성하였다. 구성된 SAR 처리기 시스템의 CCD에 검출되는 영상과 데이타를 실험 및 분석한 결과는 단위표적의 거리가 증가함에 따라 탐지효과 감소되었고, chirp 신호 대역폭의 증가에 따라 분해능력이 향상되었으며, 펄스폭의 감소에 따라 유동(smear)현상이 감소하였다. 따라서 본 논문에서 실험결과는 제안된 시스템을 실시간 처리 시스템으로써 사용할 수 있음을 확인하였다.

  • PDF

비선형 chirp 신호를 이용한 수중음향통신 (Underwater Acoustic Communication Using Nonlinear Chirp Signal)

  • 이창은;김기만;김우식;천승용;이상국
    • 한국음향학회지
    • /
    • 제33권4호
    • /
    • pp.255-261
    • /
    • 2014
  • 본 논문에서는 수중음향통신에서 비선형 chirp 변조 신호를 사용하는 방법을 제안한다. 과거 대부분의 수중음향통신에서는 반송파의 크기, 주파수 또는 위상에 정보를 실었다. 이에 반해 제안된 방법은 심볼 내에서 반송파의 주파수 변화율에 정보를 포함하게 된다. 특히, 반송파로 비선형 chirp 신호의 일종인 하이퍼볼릭 주파수 변조 신호를 사용하는 경우, 도플러 채널에서 강한 특성을 가진다. 제안된 방법은 시뮬레이션을 통해 기존 방법과 비교 및 분석하였다. 제안된 방식과 선형 주파수 변조 신호를 갖는 기존 방식을 비교하였을 때 도플러 편이가 있는 경우 제안된 방법의 오차 확률이 평균 5~12 % 감소하는 것을 확인할 수 있었다. 또한 제안된 방법의 성능을 분석하기 위해 해상실험이 수행되었다.

위성탑재 고해상도 합성개구레이더용 광대역 신호 획득을 위한 ? 스티칭 기술 연구 (Chirp Stitching Technique for Wideband Signals of the Spaceborne High Resolution Synthetic Aperture Radar)

  • 권오주
    • 한국통신학회논문지
    • /
    • 제25권10B호
    • /
    • pp.1777-1784
    • /
    • 2000
  • 본 논문에서는 최소의 하드웨어 요구사항으로 위성탑재용 고해상도 SAR의 광 대역 신호 생성 및 처리를 위한 스티칭(Chirp Stitching) 알고리듬과 이의 구현에 적합한 송.수신 부를 제안한다. 송신 부는 두 개의 협 대역 신호를 발생한 후 스티칭 기법을 사용, 협 대역보다 두 배의 주파수 대역폭을 갖는 광 대역 신호를 생성하며 수신부는 광 대역 신호 처리에 요구되는 데이터 고속처리의 어려움을 해결하기 위하여 송신 부에서 이루어진 방법을 역으로 처리하는 방법, 즉 광 대역 신호를 두 개의 협 대역 신호로 분리하여 저속으로 데이터를 처리하는 세그멘테이션 방법을 적용한다. 시뮬레이션을 통하여 100 MHz의 대역폭을 갖는 신호를 생성, 처리하였고 성능을 평가함으로써 제안된 스티칭 알고리듬 및 송.수신부의 타당성을 입증하였다.부의 타당성을 입증하였다.

  • PDF

가중된 직교 선형 FM신호를 이용한 송신 동시 다중 빔집속 기반의 초음파 영상 기법 (Simultaneous Multiple Transmit Focusing Using Orthogonal Weighted Linear FM Chirp)

  • 정영관;송태경
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
    • /
    • pp.155-158
    • /
    • 2001
  • A new method for simultaneous multiple transmit focusing using orthogonal weighted FM chirp is proposed. Weighted chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in the approximate sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels, and the crosscorrellation function of any pair of the signals has smaller values than the sidelobe levels of each autocorrelation function. This means that each weighted chirp signal can be separately compressed into a short pulse, focused individually and combined with other focused beams to form a frame of image. Theoretically, any two chirp signals defined in two nonoverlapped frequency bands are mutually orthogonal. In the present work, however, a fractional overlap of adjacent frequency bands, by up to 25%, were permitted to design more chirp signals within a given transducer bandwidth. The crosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals. The simulation results show that this method can improve the lateral resolution of image without sacrifice in the frame rate compared with the conventional pulse system.

  • PDF

타일 기반 주파수 도약 첩 대역 확산 기법 (Tile Based Frequency Hopping Chirp Spread Spectrum Technique)

  • 이철호;이병규;주현
    • 한국정보통신학회논문지
    • /
    • 제23권8호
    • /
    • pp.988-995
    • /
    • 2019
  • 본 논문에서는 저피탐(LPI)/항재밍(AJ) 성능이 우수한 타일 기반 주파수 도약 첩 대역 확산(TBFH-CSS) 기법을 제안한다. 기존 주파수 도약 첩 확산(FH-CSS) 기법은 신호 주기와 대역폭이 일정한 단일 첩 신호로 주파수 도약을 수행하여 추적 재머가 쉽게 신호를 탐지하고 재밍 공격을 할 수 있다. 제안한 TBFH-CSS 기법은 단위 시간과 단위 대역폭으로 이루어진 기준 타일의 조합으로 첩 신호를 생성하여 신호 주기와 대역폭이 일정하지 않아 추적 재머가 신호를 탐지하고 효과적으로 재밍하기 어렵다. 추적 재머를 이용한 재밍 공격 시 기존 FH-CSS 기법과 제안한 TBFH-CSS 기법의 저피탐/항재밍 성능을 비교하여 TBFH-CSS 기법이 저피탐/항재밍 성능이 우수함을 확인하였다.

OFDM 시스템에서 첩(chirp) 신호를 이용한 주파수 옵셋 추정 및 프레임 동기 방안 (The method of frequency offset estimation and frame synchronization with chirp signal in OFDM system)

  • 박종욱;강건우;황인호;윤장홍;홍재근
    • 한국통신학회논문지
    • /
    • 제25권12B호
    • /
    • pp.2025-2032
    • /
    • 2000
  • OFDM을 이용한 통신 시스템에서 주파수 옵셋은 부채널 간의 간섭을 유발하고, 수신 신호의 진폭과 위상을 왜곡시키며, 프레임 옵셋은 수신 신호의 위상을 변화시킨다. 본 논문에서는 2개의 첩 신호(chirp signal)를 이용하여 주파수 옵셋 추정 및 프레임 동기가 동시에 가능한 알고리즘을 제안한다. 제안한 방안은 프레임 동기를 위하여 1개의 첩 신호를 이용하는 Hazy 방안보다 주파수 옵셋이 발생할 경우 프레임 동기 성능을 훨씬 개선하였고, 동기에 주파수 옵셋 추정도 가능하였다. 컴퓨터 시뮬레이션을 통하여 제안한 알고리즘의 성능을 확인하였다.

  • PDF

A New Diversity Combining Scheme Based on Interleaving Method for Time-of-arrival Estimation of Chirp Signal

  • Jang, Seong-Hyun;Chong, Jong-Wha
    • 전기전자학회논문지
    • /
    • 제16권2호
    • /
    • pp.153-158
    • /
    • 2012
  • A new diversity combining scheme is proposed for time-of-arrival (TOA) estimation of chirp signal in dense multipath channel. In the multipath channel, the performance of TOA estimation using conventional correlation matrix-based diversity combining scheme is degraded due to the lack of de-correlation effect. To increase the de-correlation effect, the proposed diversity scheme employs interleaving method based on the property of de-chirped signal. As a result, the proposed scheme increases de-correlation effect and also reduces the noise of TOA estimation. Finally, the diversity achieved from the proposed scheme improves TOA estimation performance. The de-correlation effect is analyzed mathematically. The estimation accuracy of the proposed diversity scheme is superior to that of conventional diversity scheme in multipath channel.

어군에 의한 광대역 음향산란신호의 시간-주파수 분석을 위한 chirp 데이터 수록 및 처리 시스템의 성능특성 (Performance Characteristics of a Chirp Data Acquisition and Processing System for the Time-frequency Analysis of Broadband Acoustic Scattering Signals from Fish Schools)

  • 이대재
    • 한국수산과학회지
    • /
    • 제51권2호
    • /
    • pp.178-186
    • /
    • 2018
  • A chirp-echo data acquisition and processing system was developed for use as a simplified, PC-based chirp echo-sounder with some data processing software modules. The design of the software and hardware system was implemented via a field-programmable gate array (FPGA). Digital signal processing algorithms for driving a single-channel chirp transmitter and dual-channel receivers with independent TVG (time varied gain) amplifier modules were incorporated into the FPGA for better real-time performance. The chirp-echo data acquisition and processing system consisted of a notebook PC, an FPGA board, and chirp sonar transmitter and receiver modules, which were constructed using three chirp transducers operating over a frequency range of 35-210 kHz. The functionality of this PC-based chirp echo-sounder was tested in various field experiments. The results of these experiments showed that the developed PC-based chirp echo-sounder could be used in the acquisition, processing and analysis of broadband acoustic echoes related to fish species identification.