• 제어로봇시스템학회논문지
• /
• 제5권6호
• /
• pp.698-704
• /
• 1999

There are several types of defects of SMDs mounted on PCB, that is, missing components, misalignment, wrong parts and poor solder joints. This research study mainly focuses on measuring of deviation of SMD leads using the partial image of component, not using the full image. This processing based on the partial image has the advantage of the reduction in calculation time compared to the full image. Since position of lead is calculated with respect of the reduction in calculation time compared to the full image. Since position of lead is calculated with respect to pad, the accuracy of the system is not dependent on percise positioning stage. The grabbed image of gray scale is converted into binary format using a cutomatic threshold. After small fragments in the image is removed by a series of morphology operations such as opening and closing, the centroids of PCB pads and SMD leads is obtained together with labeling of blobs. Translational shift and rotationial angle of SMD are succedingly estimated using above information and chip data. The expression that can calculate the maximum deviation of leads with respect to PCB pads has been derived, and inferior mounting of SMD is judged by a given criterion. Some experiments have been executed to verify this measuring scheme.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.105-106
• /
• 2008

As a carrier of malaria and sneak of blood, mosquitoes are an unpleasant insect. However, there are several unknown natural secretes related with mosquitoes. Among them, we focused on the blood sucking process of a female mosquito. The main objective of this study is to understand the mosquito's blood sucking mechanism that can be used to resolve the problem encountered in the injection or transport of infinitesimal biological fluids in a micro-chip. At first, the velocity fields of blood-sucking flow in a proboscis were measured using a micro-particle image velocimetry (PIV) technique. The velocity signals of flow in the proboscis show periodic variation. This seems to be resulted from the beating of the pharyngeal pump which works as driving power. To analyze the pumping mechanism, the temporal variation of the pharyngeal pump was visualized using the synchrotron X-ray micro-imaging technique. The volume variation was estimated by the help of digital image processing techniques. Once the main mechanism of blood sucking process was found, a effective micro-pumping system with high efficiency would be developed in near future.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.991-992
• /
• 2006

Multiprocessor system is efficient and high performance architecture to overcome a limitation of single core SoC. In this paper, we propose a multiprocessor SoC (MPSoC) architecture which provides the low complexity and the high performance. The dynamic routing scheme has a serious problem in which the complexity of routing increases exponentially. We solve this problem by making a cluster with several PEs (Processing Element). In inter-cluster network, we use deterministic routing scheme and in intra-cluster network, we use dynamic routing scheme. In order to control the hierarchical network, we propose efficient router architecture by using smart crossbar switch. We modeled 2-D mesh topology and used simulator based on C/C++. The results of this routing scheme show that our approach has less complexity and improved throughput as compared with the pure deterministic routing architecture and the pure dynamic routing architecture.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2005년도 하계학술대회
• /
• pp.427-430
• /
• 2005

A multi-code biorthogonal code keying (MBCK) system consists of multiple waveform coding blocks, and the sum of output codewords is transmitted. Drawback of MBCK is that it requires amplifier with high linearity because its output symbol is multi-level. MBCK with constant amplitude precoding block (CA-MBCK) has been proposed, which guarantees sum of orthogonal codes to have constant amplitude. The precoding block in CA-MBCK is a redundant waveform coder whose input bits are generated by processing the information bits. Redundant bits of constant amplitude coded CA-MBCK are not only used to make constant amplitude signal but also used to improve the BER performance at the receiver. In this paper, we proposed a transmission scheme which combines CA-MBCK with $Q^2PSK$ modulation to improve bandwidth efficiency of CA-MBCK and also uses chip interleaving to maintain a constant amplitude feature of CA-MBCK. bandwidth efficiency of a proposed transmission scheme is increased fourfold. And the BER performance of the scheme is same as that of CA-MBCK.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계합동학술대회 논문집
• /
• pp.168-171
• /
• 2002

In this study. a solid-state laser system adopting a sequential discharge method in which three flashlamps are turned on sequently was designed and fabricated to examine the pulse width and the pulse shape of the laser beams depending upon the changes in the lamp turn-on time. That is, this study shows a technology that makes it possible to make various pulse shapes by turning on three flashlamps sequently with the aid of a PIC one-chip microprocessor. With this technique, the lamp turn-on delay time can be varied more diversely from a to lamp and the real-time control is possible with an external keyboard, enabling various pulse shapes. In addition, longer pulses can be more widely used for industrial processing and lots of medical purposes.

• 센서학회지
• /
• 제28권1호
• /
• pp.1-6
• /
• 2019

This paper presents an air flow sensor (AFS) based on a polymer thin film. This AFS primarily consists of a polymer membrane attached to a metal-patterned glass substrate and a temperature-sensing element composed of NiCr. These two components were integrated on a single glass substrate. The AFS measures changes in capacitance caused by deformation of the polymer membrane based on the air flow and simultaneously detects the temperature of the surrounding environment. A readout integrated circuit (ROIC) was also fabricated for signal processing, and an ROIC chip, 1.8 mm by 1.9 mm in size, was packaged with an AFS in the form of a system-in-package module. The total size of the AFS is 1 by 1 cm, and the diameter and thickness of the circular-shaped polymer membrane are 4 mm and $15{\mu}m$, respectively. The rate of change of the capacitance is approximately 11.2% for air flows ranging between 0 and 40 m/s.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.150-156
• /
• 1994

To meet the process requirement of semiconductor device manufacturing, it is necessary to improve the alignment accuracy in exposure equipments. We developed the excimer laser stepper and will describe the methodology for alignment measurement and experimental results. Our wafer alignment system consists of off-axis optics, TTL(Through The Lens) optics and high precision stage. Off-axis alignment utilizes the image processing and /or diffraction from thealign marks of off-centered chip area. On the other hand, TTL alignment can be used for the die-by-die alignment using dual beam interferometry. When only off-axis alignment was used, the experimental alignment error(lml+3 .sigma. ) was 0.26-0.29 .mu. m, and will be reduced down to 0.15 .mu. m by adding TTL alignment.

• 한국ITS학회 논문지
• /
• 제12권6호
• /
• pp.78-86
• /
• 2013

본 논문에서는 효율적인 차량 영상 안정화를 위한 고성능 차량 영상 정보 시스템을 제안한다. 제안된 시스템은 움직임 추정 및 움직임 보상으로 분할하여 설계하였다. 움직임 추정은 지역 모션 벡터 추정 및 불규칙 지역 모션 검출, 전역 모션 벡터 추정으로 구성하였다. 움직임 보상은 추정된 전역 모션 벡터를 사용하여 차량의 영상 흔들림을 보상하기 위해 네 방향에 대하여 보정을 하였다. 설계된 알고리즘은 차량 영상 안정화를 위해 IP에 적용하여 움직임 보정 기술 칩을 설계하였다. 본 논문의 결과, 움직이는 물체에 대한 차량 영상 안정화는 메모리를 사용하지 않고 실시간 처리를 했기 때문에 다른 방법과 비교하여 효율성을 입증하였다. 또한, 블록 정합을 통한 연산으로 계산 시간 감소 효과를 얻었다.

• 한국정보통신학회논문지
• /
• 제16권9호
• /
• pp.2003-2008
• /
• 2012

LED는 기존 광원에 비하여 낮은 전력 소모량과 긴 수명, 작은 크기 등의 장점으로 예상보다 더 큰 성장을 가져올 것이라는 전망도 있다. LED 조명시스템에서 LED를 동작시키기 위해서는 구동 시스템이 필요하다. 대용량에서는 Switched Mode Power Supply (SMPS)가 Linear Regulator 보다 효율이 높기 때문에 주로 사용되고, 아날로그 방식 혹은 디지털 방식으로 이를 제어하고 있다. 디지털 제어방식는 중앙처리장치인 MCU나 DSP가 기존의 아날로그 제어 칩에 비해 단가가 비싸기 때문에, SMPS 시장에 진입이 쉽지 않았다. 하지만 LED 조명시스템처럼 하나의 MCU안에 다양한 디지털 제어 기능들을 통합시켜 전체 시스템을 구현함으로써 이득을 취할 수 있다. 본 논문에서는 이러한 디지털 제어방식을 적용함에 있어 저가형 MCU를 이용하여 LED 구동 전류를 개선할 수 있는 알고리즘을 제안하고자 한다.

• 대한전자공학회논문지TC
• /
• 제38권6호
• /
• pp.11-17
• /
• 2001

본 논문에서는 고속 무선 LAN을 위한 MAC 프로토콜 프로세서 프로토타입의 설계 및 구현에 관해 기술하였다. 설계된 프로토콜 프로세서는 5GHz OFDM 물리계층과 인터페이스를 가진다. 먼저 IEEE 802.11 무선 LAN의 MAC 프로토콜 분석을 토대로 하드웨어와 펌웨어로 구현할 MAC 프로토콜 기능들을 분리하고 프레임 단위의 송수신 요구 처리가 가능한 RISC 프로세서와의 인터페이스 및 OFDM 물리계층과의 직렬전송 인터페이스를 설계하였다. 또한， MAC 프로토콜의 고속 처리를 위해 프로토콜 제어기능 및 송수신 기능을 하드웨어로 구현하였다. 개발된 MAC 하드웨어 블록은 10 MHz 주클록에서 동작하며, 이는 물리계층과의 정보교환이 옥텟 단위임을 고려할 때 물리계층에서의 속도 80Mbps에 해당한다. 설계된 FPGA MAC 기능 칩은 역시 본 연구에서 개발된 무선 LAN 시스템 프로토타입 보드에 실장되며, 다양한 DCF 기능에 대한 검증 결과 정상적으로 동작함을 확인하였다.