• Journal of Ecology and Environment
• /
• v.32 no.1
• /
• pp.61-65
• /
• 2009

We compared two nondestructive methods for leaf area estimation using leaves of 16 common plant species classified into six types depending on leaf shape. Relatively good linear relationships between actual leaf area (LA) and leaf length (L), width (W), or the product of length and width (LW) were found for ordinary leaves with lanceolate, oblanceolate, linear and sagitttate shapes with entire margins, serrate margins, mixed margins with a entire form and shallow lobes, and ordinary incised margins. LA was better correlated with LW than L or W, with $R^2$ > 0.91. However, for deeply incised lobes, LA estimation using LW showed low correlation coefficient values, indicating low accuracy. On the other hand, a method using photographic paper showed a good correlation between estimates of area based on the mass of a cut-out leaf image on a photographic sheet (PW) and actual leaf area for all types of leaf shape. Thus, the PW method for LA estimation can be applied to all shapes of leaf with high accuracy. The PW method takes a little more time and has a higher cost than leaf estimation methods using LW based on leaf dimensions. These results indicate that researchers should choose their nondestructive LA estimation method according to their research goals.

• 수도
• /
• s.6
• /
• pp.38-42
• /
• 1975

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.48-53
• /
• 2006

Noise mapping is performed in the city of Cheongju which has 626,614 inhabitants on a $153.41km^2$ area. This city has 71,387 buildings and 969,274m roads. Many database sets like information of roads, topography and buildings are required for making the noise map of large area. These database sets are provided by the various departments of the regional administration in Cheongju city. Using the given database sets, 3-dimensional model of topography and buildings are made to consider the multi-reflections and diffractions. A predicted noise level is compared with measured noise level of the road traffic noise. As the tool of management and decision of urban noise policy, noise map is combined into the map of land use to make the conflict noise map. This conflict noise map is useful to assess the present urban noise and to make the better life in complicated urban life.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.197-202
• /
• 2008

The purpose of this study is to clarify the site selection and orientation which have affected the western missionaries in construction of the first western house in Cheongju area. The results of this study are as follows; In the site selection, they chose Tap-Dong hill, by finding the higher position and taking a fine view of all natural elements, because the alters like the tomb of Confucius, the existing settlement Godang village, Dang Mt. are already located around this area. And also it was that they could easily go into Tap-Dong hill through the existing alleys, These alleys, generated near the original road of Tap-Dong hill, are developed to modern road system. These alleys affect western house's entrance and orientation. In deciding the orientation of house, korean people prefer to south and east by considering Feng-shui theory; otherwise western house, specially the first house has a southwestern aspect, because the western missionaries have a preference for the topography, entry, and view than a house facing south.

• Journal of Energy Engineering
• /
• v.28 no.1
• /
• pp.57-64
• /
• 2019

In this study, the blasting nozzle for surface treatment of the curved surface of parts in power plant industry was designed and the cleaning performance was examined through the compressible flow analysis. At this time, the outlet of the curved nozzle was designed as a curved surface along the surface of the part. After the nozzle was made by 3-D printing, the abrasive was sprayed on the surface of the cylindrical specimen and the cleaning performance test was performed. The effective cleaning area obtained after the analysis was similar to the size and shape of the effective cleaning area obtained after the experiment. From this, the validity and effectiveness of the curved nozzle design was confirmed.

• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.1
• /
• pp.91-98
• /
• 2012

This study is aimed to survey on the perception of residents about general contents and current status of urban traditional houses in Cheongju. A study on methods is using questionnaire which 12 items of attraction in Urban Traditional Houses and experimental study focusing on residents in Seowoon-dong and Seokgyo-dong where traditional houses are concentrated. As a result, residents of urban traditional houses were categorized 6 sectors, which 4 sectors of Seowoon dong and 2 setors of Seokgyo-dong, caused by the road construction. The urban spatial structures of these sectors are maintained, comparing with aerial photography on 1960's. And residents recognize eco-friendly attraction higher than awareness on traditionality, locality and aesthetic beauty. It is proposed to prepare political alternative about traditionality, locality and aesthetic beauty. Low awareness about traditionality and locality have influenced that residents hope the change of the traditional houses.

• Journal of IKEEE
• /
• v.11 no.1 s.20
• /
• pp.38-45
• /
• 2007

A new 8-bit single-slope ADC using analog RAMP generator with digitally controllable dynamic range has been proposed and simulated for column level or per-pixel CMOS image sensor application. The conversion gain of ADC can he controlled easily by using frequency divider with digitally controllable diviber ratio, coarse/fine RAMP with class-AB op-amp, resistor strings, decoder, comparator, and etc. The chip area and power consumption can be decreased by simplified analog circuits and passive components. Proposed frequency divider has been implemented and verified with 0.65um, 2-poly, 2-metal standard CMOS process. And the functional verification has been simulated and accomplished in a 0.35$\mu$m standard CMOS process.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.2
• /
• pp.349-365
• /
• 2014

Chungcheongbuk-do can be said that it is not developed well because its surface accounts for 7.5% of Korea's whole land surface, and it accounts for 3.1% of population and main economical index from those of whole Korea. However, Chungcheongbuk-do should develop itself more by integrating of Cheongju-si and Cheongwon-gun, transfer of government facilities to Sejong city, and dispersing manufacturing companies of Seoul Metropolitan area. The factor which affects Chungcheongbuk-do's regional specialized industries is the distance from Cheongju-si and Gyeonggi-do. Service industries are specialized in urban area; manufacturing industries are specialized in regions which are close to Cheongju-si or Gyeonggi-do; and primary industries and consumer service industries are specialized in areas that is far from Cheongju-si. This study can be a foundation for studies on regional and industrial change of Chungcheongbuk-do by looking at its population and location quotient.

• Journal of Energy Engineering
• /
• v.29 no.3
• /
• pp.18-24
• /
• 2020

In this study, a lightweight wide impeller for large-area surface treatment was designed and structural stability was confirmed based on finite element(FE) analysis. A lightweight bracket FE model was established through topology optimization, and the optimal FE model was selected after structural analysis. The bending deformation FE analysis was performed, and bending deformation was included in the allowable deformation range. In addition, FE modal analysis was performed, and the range of safe speed(RPM) by rotation was suggested. Ultimately, it was confirmed that this analytical technique is effective for design the lightweight wide impeller.

• Journal of the Korean Institute of Rural Architecture
• /
• v.26 no.2
• /
• pp.35-40
• /
• 2024

This study examines the classification and typical characteristics of 148 owner shop houses existing in the historical city center of Cheongju. First, they can be classified into single-story, middle-story, and divided types according to the distribution of residential and commercial functions. The single-story(36) has 'ㅡ', 'ㄱ', and 'narrow and deep'-shaped arrangement, with stores on the front and houses on the rear. The middle-story second floor(89) is divided into a first-story store and a second-story house, and the third floor(23) has different functions for each floor, but more than half of them have houses on the second and third floors. Among the total, there are also 16 cases in which the division type is taken with different construction times and structures. Second, in the position of the stairs connected to the upper floor among the middle-floor types(112), the outer stair type(52) to separate from the living space while making the most of the stores on the first floor accounts for 47%, but the biggest feature is that the inner staircase type(34) with privacy reaches 30%. The rear stair room type(26) entering through alleyways or private yards is also 23%. Third, the front pillar spacing varies from 1bay to 4bay in appearance, but the 2bay type on the 2nd floor and the 1bay type on the 3rd floor occupy the largest proportion. This exterior type is a characteristic of a owner shop house that can measure the range of personal ownership. Despite the conflicting functions of stores and houses, 35~40% of the cases are in which the opening positions of the upper and lower floors are unified.