• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.6
• /
• pp.394-399
• /
• 2013

The recalcitrant hairs which are accumulated in the U-trap equipped to prevent the stench from the drainage produce the phenomenon of blocking the flow of water through the home drainage pathway. The chemical dissolution solutions commercially manufactured are excessively poured into U-trap to solve this blocking problem. In this study, the specially designed instrument was developed for the experiments to cut and crush the hairs of which main component are the recalcitrant keratin proteins. The performance of the instrument for cutting and crushing hairs was investigated using experimental methods. The cutting and weighing method was used in order to obtain the average length of a large amount of hairs cut by instrument. This method is relatively simple to measure the weight of cutting hairs to obtain the average length of the fibers, the values of average length showed not greater tolerances. Also the average cutting number was defined to evaluate the performance of the cutting and crushing instruments designed for this study. We were able to apply these evaluation methods to provide the criteria to obtain the optimal structure of instrument and proper operation time in the given experimental conditions. These experimental methods and results will provide the good example to design and to analyze the various device that can be used for cutting the fibers. The cutting and crushing instrument developed in this study showed the effective abilities to cutting the hairs. The general using the cuttting and crushing instrument at every home would be helpful to prevent water environmental pollution.

• Korean Journal of Environmental Agriculture
• /
• v.10 no.2
• /
• pp.149-157
• /
• 1991

In order to elucidate the possible change in the non-extractable bound residue of TCAB(3,3' 4,4' - tetrachloroazobenzene) in soil as a function of aging period, uniformly ring-labelled $^{14}C-TCAB$ was treated to soil(organic matter : 1.8%), and aged for 3, 6, 9, 12 and 15 months at $21{\pm}1^{\circ}C$, respectively. $^{14}CO_2$ evolution and volatilization loss during the aging were negligible. The amounts of non-extractable bound residue of TCAB increased gradually from 7.55% in 3-month aging to 19.32% in 15-month aging. Partition data suggested no formation of polar groups in the chemical structure of TCAB. Most of $^{14}C-radioactivity$ of bound residues was present in humin in the range of 50.52 to 58.93%. The fact that the number of microorganisms in soil decreased relative to the control suggested no chance of their involvement in the formation of non-extractable bound residues. Accordingly, the increase in the non-extractable bound residue of TCAB in soil with aging period is believed to be due to the transformation of the trans isomer to the cis one which is more polar and more adsorptive than the former.

• The Korean Journal of Pesticide Science
• /
• v.3 no.1
• /
• pp.20-28
• /
• 1999

Chloronicotinyl derivatives were synthesized by substitution of amino in 3-pyridylmethylamine with phosphite groups and their insecticidal and fungicidal activities were determined. At 500 ppm, compound 4 with methyl and butyl group in phosphonate and compound 5, 6, 7, and 8 with two butyl, 2,2,2-trifluorotehtyl, 2-ethylhexyl, phenyl, respectively, in phosphonate showed 90% insecticidal activities against brown plant-hopper (Nilaparvate lugens). These compounds showed, however, poor insecticidal activities against diamond-back moth (Plutella xylostella) and two-spotted spider mite (Tetranychus urticae) (<65%), suggesting that insecticidal activity of chloronicotinyl derivatives containing phosphorus moieties are species-dependent. Newly synthesized chloronicotinyl derivatives with halogen and/or heterocycle (compound $10{\sim}21$) did not show insecticidal activities. We also determined fungicidal activity of the synthesized chloronicotinyl derivatives against rice sheath blight (Pyricularia grisea), cucumber gray mold (Bortytis cinerea), tomato late blight (Phytophthora infestans), wheat leaf rust (Puccinia recondita), and barley powdery mildew (Erysiphe graminis). Compound 10 with butyl and 4-nitrophenyl in phosphonate at 10 ppm showed 85% fungicidal activity against rice blast, suggesting that chloronicotinyl derivatives containing phosphorus moieties could be developed as a fungicidal agent of a novel chemical structure.

• The Korean Journal of Pesticide Science
• /
• v.2 no.1
• /
• pp.24-31
• /
• 1998

Chemical derivative synthesis of ricinine, an active compound of Ricinus communis which showed high mortality against brown planthopper (Nilaparvata lugens), was performed to improve its pesticidal activity and the toxicity of 12 synthetic derivatives against major insect pests and phytopathogenic fungi were examined. Carbamate derivatives of ricinine could be synthesized from the precursor of ricinine, chloronorricinine and norricinine, whereas the derivatives were not synthesized from chlororicinic acid and ricinic acid having ketone group of pyridine ring. In organophosphates, reaction with oxon type of phosphate gave better yield than thiono type. Among the organophosphate derivatives of ricinine, thiono type of derivative structure gave $96.3%{\sim}100%$ mortality of the brown planthopper and the two-spotted spider mite (Tetranychus urticae) at 500 ${\mu}g/ml$ level. On the other hand, carbamate derivatives did not show insecticidal activity. In the fungicidal activity of ricinine derivatives, the derivative having amino radical at the 2 position of ricinine gave 85 to 100% of mycelium growth inhibition effect against ten major plant pathogens at the 200 ${\mu}g/ml$ level. In particular, the control value of the derivative on the rice blast (Pyricularia grisea) and barley powdery mildew (Erysiphe graminis) at the 250 ${\mu}g/ml$ level in vivo under greenhouse conditions was 92% and 96%, respectively.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 1995.06b
• /
• pp.27-53
• /
• 1995

In plant pathology there is an increasing necessity for improved cytological techniques as basis for the localization of cellular substances within the dynamic fine structure of the host-(plant)-pathogen-interaction. Low temperature (LT) preparation techniques (shock freezing, freeze substitution, LT embedding) are now successfully applied in plant pathology. They are regarded as important tools to stabilize the dynamic plant-pathogen-interaction as it exists under physiological conditions. - The main advantage of LT techniques versus conventional chemical fixation is seen in the maintenance of the hydration shell of molecules and macromolecular structures. This results in an improved fine structural preservation and in a superior retention of the antigenicity of proteins. - A well defined ultrastructure of small, fungal organisms and large biological samples such as plant material and as well as the plant-pathogen (fungus) infection sites are presented. The mesophyll tissue of Arabidopsis thaliana is characterized by homogeneously structured cytoplasm closely attached to the cell wall. From analyses of the compatible interaction between Erysiphe graminis f. sp. hordei on barley (Hordeum vulgare), various steps in the infection sequence can be identified. Infection sites of powdery mildew on primary leaves of barley are analysed with regard to the fine structural preservation of the haustoria. The presentation s focussed on the ultrastructure of the extrahaustorial matrix and the extrahaustorial membrane. - The integration of improved cellular preservation with a molecular analysis of the infected host cell is achieved by the application of secondary probing techniques, i.e. immunocytochemistry. Recent data on the characterization of freeze substituted powdery mildew and urst infected plant tissue by immunogold methodology are described with special emphasis on the localization of THRGP-like (threonine-hydrxyproline-rich glycoprotein) epitopes. Infection sites of powdery mildew on barley, stem rust as well as leaf rust (Puccinia recondita) on primary leaves of wheat were probed with a polyclonal antiserum to maize THRGP. Cross-reactivity with the anti-THRGP antiserum was observed over the extrahaustorial matrix of the both compatible and incompatible plant-pathogen interactions. The highly localized accumulation of THRGP-like epitopes at the extrahaustorial host-pathogen interface suggests the involvement of structural, interfacial proteins during the infection of monocotyledonous plants by obligate, biotrophic fungi.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.605-613
• /
• 1992

NCO-terminated prepolymers were synthesized by reacting carbonate-type polyol(PTMCG)($M_w=1,000$ and 2,000) with MDI and N-methyldiethanolamine, as a chain extender. Carbonate-type polyurethane containg zwitterionic group was prepared by reacting the prepolymer with 1,3-propane sultone. From the IR and NMR spectra of model reactions, it was known that the ionization occurred under the same condition. The structure of zwitterionic carbonate-type polyurethane(ZPU) therefore could be confirmed from the model reactions. Glass transition temperature(Tg) ranged between $-15{\sim}-30^{\circ}C$ from the thermal data. Tg was between $-15{\sim}-18^{\circ}C$ for a series of ZPU10 samples and between $-25{\sim}-26^{\circ}C$ for a series of ZPU20 polymers. Tensile strength increased with mole ratio of ionic content. On the contrary, elongation was rather dropped with mole ratio of ionic content. ZPU10-30 having better tensile strength and less elongation was selected as a membrane for the concentration of ethanol aqueous solution through pervaporation. To obtain the better selectivity, it was crosslinked with HMDI. In the swelling test, it showed the higher swelling degree at around 50wt% ethanol concentration due to the plastization effect of ethanol. To optimize the separation capacity, two operating factors-feed concentration and temperature-were considered. The overall separation capacity was as follows : separation factor, 2~83.2 ; the flux, $25.4{\sim}58.8g/m^2hr$.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.1
• /
• pp.6-13
• /
• 2012

HVOF thermal spray coating of 80%WC-CoFe powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and hard ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen by chrome plating and the brittleness of ceramics coatings. 80%WC-CoFe powder was coated by HVOF thermal spraying for the study of durability improvement of the high speed spindle such as air bearing spindle. The coating procedure was designed by the Taguchi program, including 4 parameters of hydrogen and oxygen flow rates, powder feed rate and spray distance. The surface properties of the 80%WC-CoFe powder coating were investigated roughness, hardness and porosity. The optimal condition for thermal spray has been ensured by the relationship between the spary parameters and the hardness of the coatings. The optimal coating process obtained by Taguchi program is the process of oxygen flow rate 34 FRM, hydrogen flow rate 57 FRM, powder feed rate 35 g/min and spray distance 8 inch. The coating cross-sectional structure was observed scanning electron microscope before chemical etching. Estimation of coating porosity was performed using metallugical image analysis. The Friction and wear behaviors of HVOF WC-CoFe coating prepared by OCP are investigated by reciprocating sliding wear test at $25^{\circ}C$ and $450^{\circ}C$. Friction coefficients (FC) of coating decreases as sliding surface temperature increases from $25^{\circ}C$ to $450^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.427-431
• /
• 1999

Copolyester resins for the coil coating process of aluminium and steel strip were synthesized and their thermal properties, molecular weight and solvent solution characteristics were examined. Copolyesters were obtained by two step reactions. The first step was to prepare bishydroxyethyl terephthalate (BHET), bishydroxyneopentyl terephthalate (BHNPT), bishydroxyethyl isophthalate (BHEI), bishydroxyneopentyl sebacate (BHNPS), bishydroxyneopentyl adipicate (BHNPA) and bishydroxyethyl adipicate (BHEA) oligomers by esterification reactions. The second step was the polycondensation reaction utilizing those oligomers to obtain relatively high molecular weight copolyesters (Mw = 30,000~59,000 g/mol) as measured by GPC. These copolyesters were amorphous polymers as shown by DSC without $T_m$ peaks probably due to the kink structure introduced by BHET oligomer and relatively large free volume by bulky BHNPT and BHNPS oligomers. The copolyester samples with half of BHET oligomer substituted by BHNPT while keeping BHEI (0.3 mole) and BHNPS (0.1 mole) ratio constant showed glass transition temperature above $40^{\circ}C$ and good solubility in toluene both at low ($-5^{\circ}C$) temperature and room temperature.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.590-592
• /
• 2010

Li-Mn spinel ($LiMn_2O_4$) is prepared by a hydrothermal process with K-Birnessite ($KMnO_4{\cdot}yH_2O$) as a precursor. The K-Birnessite obtained via a hydrothermal process with potassium permanganate [$KMnO_4$] and urea [$CO(NH_2)_2$] as starting materials are converted to Li-Mn spinel nanoparticles reacting with LiOH. The molar ratio of LiOH/K-Birnessite is adjusted in order to find the effect of the ratio on the structural, morphological and electrochemical performances of the Li-Mn spinel. X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), and thermogravimetry (TG) are used to investigate the crystal structure and morphology of the samples. Galvanostatic charge and discharge are carried out to measure the capacity and rate capability of the Li-Mn spinel. The capacity shows a maximum value of $117\;mAhg^{-1}$ when the molar ratio of LiOH/K-Birnessite is 0.8 and decreases with the increase of the ratio. However the rate capability is improved with the increase of the ratio due to the reduction of the particle size.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.603-611
• /
• 2009

Thermotropic liquid crystalline behavior of a homologous series of penta-O-4-{4'-(cyanophenylazo)phenoxy}alkyl-D-glucopyranoses(CAGETn, n = 2~10, the number of methylene units in the spacer) has been investigated. The CAGETn with n of 2 and 7 exhibited enantiotropic nematic phases whereas other derivatives showed monotropic nematic phases. This is the first report of glucose derivatives that form thermotropic nematic phases. The isotropic-nematic transition temperatures ($T_{iNS}$) of CAGETns and their entropy variation at $T_{iN}$ showed the odd-even effect as a function of n. This behavior was rationalized in terms of the change in the average shape of the side chains as the parity of the spacer is varied. This rationalization also accounts for the observed variation of nematic-crystalline phase transition temperatures ($T_{NkS}$) and associoated entropy change at $T_{Nk}$. The entropy change at $T_{iN}$ or $T_{Nk}$ reaches a mininum at n = 3, before it increases again for n = 4. This may be attributed to the difference in the arrangement of the side groups. The mesophase properties of CAGETns were entirely different from those reported for partially or fully alkylated glucopyranoses. This result suggests that the degree of substitution and chemical structure of the substituents play an important role in the formation of the mesophase structures in the liquid crystals.