• Economic and Environmental Geology
• /
• v.37 no.2
• /
• pp.225-234
• /
• 2004

The Chungung-dong 5-storied pagoda (Treasure No. 12) in the nnm, Korea was studied on the basis of petrological weathering and deterioration diagnosis. Frontal part of the pagoda is looked out on the N30$^{\circ}$W. Constitution rocks of this pagoda show augen gneiss and biotite granite. Host rock of the pagoda was highly exfoliation and discoloration, therefore most rock-forming minerals were altered to the clay minerals due to the mineralogical and chemical weathering. Open cavity and rock surface occur partly green and black patchs because of contamination by algae, lichen and moss, and the lower part of the pagoda is transition to the some weeds. This biological problems are need for cleaning and chemical treatments. For the structural stability, the pagoda is rebuilt without open gap between the each rock materials. All iron plates eliminate from the difference gap of the rock materials, and properly conservation treatments need to be repaired petro-filler for stone cultural properties and water curtain for the humidity attenuation of the ground.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1496-1500
• /
• 2010

Sibutramine enantiomers were separated successfully by capillary zone electrophoresis using substituted cyclodextrins as chiral selectors. The effects of cyclodextrin concentration, pH, voltage, buffer type, and electrolyte concentration on the migration time and resolution of enantiomers were examined. Separation of sibutramine enantiomers on an unmodified fused silica capillary (total length, 54 cm; effective length, 45 cm) was achieved using a mixed buffer of 20 mM phosphate/10 mM citrate containing either 5 mM methyl-${\beta}$-cyclodextrin (pH 4.3) or 5 mM carboxymethyl-${\beta}$-cyclodextrin (pH 6.5). Samples were injected with a pressure of 50 mbar for 5 s and were detected at a wavelength of 223 nm. The established method showed good precision and accuracy, with intra- and inter-day variations of less than 2.9 and 4.7%, respectively, and recoveries of 95.7 - 103.8%. The stability constants of (R)- and (S)-sibutramine demonstrated that the resolution of sibutramine enantiomers was attributable primarily to the difference in stability constants. When this optimized method was applied to the determination of sibutramine enantiomers in commercial drug formulations, it proved to be economical and convenient, affording sufficient accuracy, precision, and reproducibility as well as sensitivity and selectivity.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.5
• /
• pp.207-216
• /
• 2018

This research compared and analyzed safety ratio of slope with Talren97 and SoilWorks based on limit equilibrium analysis and Midas GTS based on finite element analysis. For the analysis variables, there are slope height, berm condition, soil parameter, groundwater level, slope inclination. All of slope stability analysis were performed by dividing into dry season and rainy season. As the result of the analysis of Talren97 and SoilWorks based on same theory, safety ratio of slope shows same value, so there was no difference between the programs. In comparison with limit equilibrium analysis, the result of finite element analysis showed somewhat high ratio of safety and it was higher by about 2.4% averagely. The difference between the result of limit equilibrium analysis and that of finite element analysis is in the range which can ignored in practical work.

• Korea-Australia Rheology Journal
• /
• v.16 no.1
• /
• pp.27-33
• /
• 2004

Application of gas assisted injection molding has been expanded during last two decades because of many advantages such as design flexibility, dimensional stability, reduction of machine tonnages, and so on. However, the surface defects including hesitation mark and gloss difference are observed for thick parts. Difficulties in lay-out of the gas channel and processing condition are another disadvantages. Liquid gas assisted injection molding(LGAIM), in which a liquid with a boiling point lower than the temperature of the polymer melt is injected into the melt stream, and travels with the melt into the mold where it vaporizes and pushes the melt downstream and against the cavity walls to create hollow channels within the part, is a good alternative of the conventional gas assisted injection molding especially in manufacturing simple and very thick parts. Though this is a new frontier of the innovation in the injection molding industry, there is no guideline for the design and processing conditions. In this paper, theoretical analysis has been made to describe the hollow formation dynamics in LGAIM. This model provides an insight into LGAIM process: explains why LGAIM has advantages over conventional gas assisted injection molding, and gives a guideline for the design and processing conditions.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3671-3676
• /
• 2013

A series of carbon nanotube, $C_{60}$, and graphene modified $TiO_2$ nanocomposites were prepared by hydrothermal method. X-ray diffraction, $N_2$ adsorption, UV-Vis spectroscopy, photoluminescence, and Electrochemical impedance spectra were used to characterize the prepared composite materials The results reveal that incorporating $TiO_2$ with carbon materials can extend the adsorption edge of all the $TiO_2$-carbon nanocomposites to the visible light region. The photocatalytic activities were tested in the degradation of 2,4,6-trichlorophenol (TCP) under visible light. No obvious difference in essence was observed in structural and optical properties among three series of carbon modified $TiO_2$ nanocomposites. Three series of carbon materials modified $TiO_2$ composites follow the analogous tentative reaction mechanism for TCP degradation. GR modified $TiO_2$ nanocomposite exhibits the strongest interaction and the most effective interfacial charge transfer among three carbon materials, thus shows the highest electron-hole separation rate, leading to the highest photocatalytic activity and stability.

• Elastomers and Composites
• /
• v.53 no.1
• /
• pp.6-12
• /
• 2018

Styrene-butadiene Rubber (SBR) Latex composites, incorporated with cellulose/starch-silica hybrids synthesized by gel-adsorption method, were filled into rubber by the latex compounding method. The structure morphology, mechanical properties, and thermodynamic properties of gel-silica hybrids were characterized. The states of hybrids which used as fillers were also characterized by SEM. As the fillers ratio increased, the difference for storage modulus of samples had been morphology by rubber process analyzer (RPA). Then, as more fillers ratio was filled into the matrix, the best tensile strength result, and the largest modulus value were also proved by UTM and RPA. As for thermal stability, increase in the ratio of fillers led to higher initial decomposition temperature, which was also proved by TGA. The swelling ratio of samples has also been characterized. From the results of all the tests, cellulose-silica hybrid showed the best results as a filler, and the best filling ratio of this hybrid is about 10 phr, which has the best storage modulus and great tensile strength.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.590-594
• /
• 2008

The inclusion complexes of cyclodextrins (CDs) with flavones in aqueous solution were investigated by phase solubility measurements. The effect of b -cyclodextrin (b -CD), heptakis (2,6-di-O-methyl) b -cyclodextrin (DM-b -CD) and 2-hydroxypropyl-b -cyclodextrin (HP-b -CD) on the aqueous solubility of three flavones, namely, chrysin, apigenin and luteolin was investigated, respectively. Solubility enhancements of all flavones obtained with three CDs followed the rank order: HP-b -CD > DM-b -CD > b -CD, and besides, CDs show higher stability constant on luteolin than that on others flavones. 1H-nuclear magnetic resonance (NMR) spectroscopy and molecular modeling was used to help establish the model of interaction of the CDs with luteolin. NMR spectroscopic analysis suggested that A-C ring, and part of the B ring of luteolin display favorable interaction with the CDs, which was also confirmed by docking studies based on the molecular simulation. The observed augmentation of solubility of luteolin by three CDs was explained by the difference of electrostatic interaction of each complex, especially hydrogen bonding.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3719-3726
• /
• 2012

Formation of Z-DNA, a left-handed double helix, from B-DNA, the canonical right-handed double helix, occurs during important biological processes such as gene expression and DNA transcription. Such B-Z transitions can also be induced by high salt concentration in vitro, but the changes in the relative stability of B-DNA and Z-DNA with salt concentration have not been fully explained despite numerous attempts. For example, electrostatic effects alone could not account for salt-induced B-Z transitions in previous studies. In this paper, we propose that the B-Z transition can be explained if counterion entropy is considered along with the electrostatic interactions. This can be achieved by conducting all-atom, explicit-solvent MD simulations followed by MM-PBSA and molecular DFT calculations. Our MD simulations show that counterions tend to bind at specific sites in B-DNA and Z-DNA, and that more ions cluster near Z-DNA than near B-DNA. Moreover, the difference in counterion ordering near B-DNA and Z-DNA is larger at a low salt concentration than at a high concentration. The results imply that the exclusion of counterions by Z-DNA-binding proteins may facilitate Z-DNA formation under physiological conditions.

• Membrane Journal
• /
• v.32 no.6
• /
• pp.383-389
• /
• 2022

Membrane separation process is an important technique utilized for various applications. This separation process proceeds due to a driving force such as concentration gradient, pressure or electrical potential gradient etc. Pervaporation is one of the separation process based on solution-diffusion mechanism. The pressure of the permeate side is reduced by creating vacuum and separation is driven due to pressure difference. Purity of the fuel or chemical like ethanol or isopropyl alcohol are improved by dehydration process through porous zeolite membrane. These membranes have high thermal, chemical, mechanical stability. This review is classified mainly into two different sections: Ethanol and bio-oil dehydration by zeolite membrane.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.255-260
• /
• 2005

Stability of functional properties and chemical components of gamma-irradiated Astragali Radix (AR) were investigated to study the application of radiation technology for preservation and hygiene of medicinal herbs. Thus, ethanolic extracts and ethyl acetate fractions were prepared from gamma-irradiated and gamma-nonirradiated AR, respectively. Functional properties were estimated by comparing antioxidant activity (DPPH radical scavenging activity, lipid peroxidation inhibitory activity) and protective effect against oxidative DNA damage in human lymphocytes. Chemical components were compared by HPLC analysis, comparing with calycosin ($_{t}$ R= 15.111 min), which was isolated from ethyl acetate fraction as a standard material. Their antioxidant activities and protective effects against oxidative DNA damage showed no significant difference at the concentrations tested. HPLC analysis also showed almost same pattem. These results suggest that the functional properties and chemical components of AR are not affected largely by gamma irradiation, and radiation technology can be applied to preservation and hygiene of medicinal herbs.s.