• 펄프종이기술
• /
• 제43권4호
• /
• pp.49-58
• /
• 2011

The maximum drying shrinkage velocity was proposed to verify bulk and stiffness improvement mechanism during drying according to papermaking parameters. It was based on the wet-web shrinkage behavior without the restraint of wet-web during drying, so intact drying impact could be measured. Bulking agent reduced the drying shrinkage and the maximum drying shrinkage velocity, so paper bulk increased and paper strength decreased. When adding cationic starch to stock with the bulking agent for strengthening, the bulk was increased further with additional decreasing of the drying shrinkage and the maximum drying shrinkage velocity. Paper strength also increased except tensile stiffness index with decreasing the drying shrinkage and the maximum drying shrinkage velocity. When using additional strength additives for strengthening of fiber interfaces extended by bulking agent and cationic starch, amphoteric strength additive increased paper stiffness without loss of paper bulk. It was considered that the added amphoteric strength additives were cross-linked to the stretched cationic starch and this cross-linking increased elasticity of fiber-polymer-fiber interfaces without changing the drying behavior. Paper bulk could be increased with decreasing the maximum drying shrinkage velocity. The drying shrinkage of paper also could be controlled by fiber-to-fiber bonding interfaces by the bulking agent. In this case, paper strength including stiffness was decreased by reducing fiber-to-fiber bonding but it could be improved by strengthening fiber-to-fiber interfaces with polymer complex without loss of bulk.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.816-821
• /
• 2003

This paper deals with a reduction in the setting shrikage of polymer concrete using bentonite as shrinkage reducing agent. This study with polymer concrete using unsaturated polyester(UP) based on recycled PET waste was performed to verify the effect of various shrinkage reducing agent contents and the types of filler which are fly ash and $CaCo_3$. Setting stress induced by setting shrinkage was investigated in temrs of mechanical and chemical combination.

• 폴리머
• /
• 제30권5호
• /
• pp.407-411
• /
• 2006

액상의 고분자 전구체 polyvinylsilazane (PVS) 혹은 allylhydridopolycarbosilane(AHPCS)를 실리콘 기판 위에 스핀 코팅한 다음, DVD 마스터로부터 제조된 polydimethylsiloxane(PDMS) 몰드를 이용한 자외선 나노임프린트법으로 나노 크기의 고분자 패턴을 제조하였다. 나아가 질소 분위기하에서 $800^{\circ}C$ 열처리함으로써 각각 SiCN, SiC 세라믹 패턴도 제조하였다. 가교된 고분자와 세라믹 패턴의 폭과 넓이를 원자힘현미경(AFM)과 주사전자현미경(SEM)으로 관측한 결과 PVS와 AHPCS의 패턴 높이는 각각 38.5%와 24.1%, 패턴 폭은 18.8%와 16.7%의 수축률을 나타내었다. 즉 전구체의 세라믹 수율이 높을수록 세라믹 패턴 수축률은 낮아졌고, 패턴과 기판과의 접착에 의한 수축억제로 이방성 수축현상도 관찰되었다. 본 연구결과는 새로운 세라믹 MEMS 소자제작공정으로서 나노임프린트법의 가능성과 수축률 제어 연구가 필요함을 제시하고 있다.

• 한국세라믹학회지
• /
• 제45권8호
• /
• pp.443-452
• /
• 2008

Shrinkage crack is a major concern for cement materials, especially for flat structures such as Korean On-Dol floor system, flooring for garages, and wall. One of the methods to reduce the adverse effects of shrinkage cracking is to reinforce cement materials with shot randomly distributed fibers. The efficiency of inorganic fibrous material to arresting cracks in cementitious composites was studied. Cement materials reinforced with five different qualities of inorganic fibrous material were tested. Contents of inorganic fibrous material were 1.0 kg, 1.5 kg, 2.0 kg, 2.5 kg, 3.0 kg by weight of cement mortar and C : S types of cement mortar were 1:3 and 1:4. W/C were 60% and 80%. Cement mortar of inorganic fibrous material reinforcement showed an ability to reduce the crack width and crack length significantly as compared to unreinforced cement mortar. $40%{\sim}60%$ drop in shrinkage crack of 1:4 cement mortar with 1.5 kg over was observed.

• Elastomers and Composites
• /
• 제42권4호
• /
• pp.201-208
• /
• 2007

본 연구에서는 충전된 고무재료의 온도 변화에 대한 치수 안정성을 고찰하기 위해 카본블랙 또는 실리카가 충전된 NR과 SBR의 열변화시 발생하는 수축력과 팽창력을 측정하였다. 일정 길이로 인장된 시편의 온도를 올렸을 때 고무사슬의 엔트로피적 변화에 의해 수축력이 발생하였다. 카본블랙이나 실리카가 첨가된 NR의 경우 충전제 함량이 증가함에 따라 최대 열수축력 값이 감소하였으나, SBR의 경우는 30 phr 함량에서 미충전 고무보다 높은 열수축력 값을 보였다. 압축된 시편의 열팽창력 측정의 경우, 카본블랙을 첨가한 NR의 열팽창력은 거의 변화가 없었으나, SBR은 카본블랙 양의 증가와 함께 최대 팽창력 값이 증가하였다. 실리카를 첨가했을 경우 NR, SBR시편 모두 첨가량이 증가할수록 최대 열팽창력 값이 증가하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.151-154
• /
• 2006

It is generally referred that life cycle of concrete construction is depend on whether durability of concrete is obtained or not. Nevertheless, it has not been yet applied that new material and technology to improve durability of concrete such as seaside concrete construction. In this study, chemical agent which is capable of improving durability added to 2 types seaside concrete mixs and evaluated engineering properties such as slump, air content, setting time and compressive strength. Besides shrinkage crack with an restraint condition and chloride ion penetration tests were executed to measure resistance of concrete added chemical agent and then compared non-added. It was appeared that engineering properties and resistant for chlorides was possible to improved. But resistant for shrinkage crack was not noticeable improvement than non-added. Therefore it is necessary that more consideration and following study to improve durability aspect to shrinkage crack and chlorides resistant.

• 콘크리트학회논문집
• /
• 제17권5호
• /
• pp.853-856
• /
• 2005

A low water/cement ratio leads to autogenous shrinkage of cement paste at an early age. This autogenous shrinkage is related to the change of relative humidity in the pore structure that is formed during the hydration process. The relationship between autogenous shrinkage and relative humidity change are relatively well defined today, but the effects of temperature on autogenous shrinkage, relative humidity, and pore structures have been studied less systematically. This study focused on correlating alterations of these properties of cement paste hydrated at constant temperatures of 20, 40, and $60^{\circ}C$. The test results clearly indicate that increasing curing temperature resulted in increased porosity, particularly for pores between 5 to 50 nm as measured by MIP, and increased autogenous shrinkages, as a consequence of a reduction of relative humidity at early ages.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.163-164
• /
• 2020

The purpose of this study was to evaluate the shrinkage properties of a tile reinforced with epoxy resin, which has the advantages of high adhesion and low shrinkage, and causes a hardening reaction by chemical bonding with cement mortar. As a result, since the epoxy resin adhesive suppresses the moisture evaporation of the mortar, the drying shrinkage of the mortar itself is reduced, accordingly, the shrinkage of the tile itself is greatly reduced, and it is thought that it is possible to prevent a decrease in adhesion due to shear stress.

• 한국건축시공학회지
• /
• 제16권6호
• /
• pp.561-569
• /
• 2016

콘크리트는 현재까지 사용되는 건축재료 양호한 품질을 지니고 있으며, 시멘트의 화학조성이 지표상의 화학조성과 유사하여 가장 쉽게 얻을 있는 재료 중 하나이다. 하지만 약한 결합력과 낮은 결합에너지로 변형에 취약하여 균열이 발생하게 된다. 건조수축 균열 저감을 위해 본 연구에서는 AE제, 감수제, 수축저감제 등을 각각 사용하는 기존연구와 달리 작업의 편리성 향상을 위하여 수축저감제 및 감수제의 혼합 형태인 수축저감형 혼화제(Superplasticizer for Reduction of Shrinkage, 이하 SRS로 칭함)를 이용하였다. 현재 레미콘사에서 일반적으로 사용되고 있는 콘크리트와 모르타르의 배합으로 계획하였으며, SRS 혼입률 변경과 혼화재 치환에 따른 기초적 실험을 진행하였다. 강도와 길이변화율을 고려하였을 때 SRS 혼입률 2%가 적정한 혼입률이라고 판단된다. 또한 대량치환과 노출콘크리트용 혼화제 적용에 관한 연구를 진행할 예정이다.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3252-3258
• /
• 2010

In this study, the effects of the various parameters of spinning and drawing processes on the properties of polyester full drawn yarn (FDY) prepared by steam processing during high-speed spinning were investigated using several techniques. The wet shrinkage ratio of the FDY was able to be manipulated by controlling the temperature and draw ratio. The FDY made using the steam high speed spinning technique exhibited identical properties (such as tenacity, elongation, and wet shrinkage ratio) to that of regular FDY, made using the spin-draw process. FDY prepared using the steam process during high-speed spinning showed excellent dyeability. The dye pick-up of the polyester yarn spun at high-speed spinning was found to be improved when dyed under an atmospheric pressure of $100^{\circ}C$. This result was the same as regular FDY dyed under a high pressure of $130^{\circ}C$.