• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.5 s.248
• /
• pp.405-412
• /
• 2006

In order to realize a stably propagating flame in a narrow channel, flame instabilities resulting from flame-wall interaction should be avoided. In particular flame quenching is a significant issue in micro combustion devices; quenching is caused either by excessive heat loss or by active radical adsorptions at the wall. In this paper, the relative significance of thermal and chemical effects on flame quenching is examined by means of quenching distance measurement. Emphasis is placed on the effects of surface defect density on flame quenching. To investigate chemical quenching phenomenon, thermally grown silicon oxide plates with well-defined defect distribution were prepared. ion implantation technique was used to control defect density, i.e. the number of oxygen vacancies. It has been found that when the surface temperature is under $300^{\circ}C$, the quenching distance is decreased on account of reduced heat loss; as the surface temperature is increased over $300^{\circ}C$, however, quenching distance is increased despite reduced heat loss effect. Such abberant behavior is caused by heterogeneous surface reactions between active radicals and surface defects. The higher defect density, the larger quenching distance. This result means that chemical quenching is governed by radical adsorption that can be parameterized by oxygen vacancy density on the surface.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.12
• /
• pp.2002-2010
• /
• 2006

This study examined the quenching of ofloxacin (OFL) and flumequine (FLU) fluorescence by $Cuj^{2+}$, $Ni^{2+}$, $Co^{2+}$ and $Mn^{2+}$ in an aqueous solution. The change in the fluorescence intensity and lifetime was measured at various temperatures as a function of the quencher concentration. According to the Stern-Volmer plots, the fluorescence emission was quenched by both collisions (dynamic quenching) and complex formation (static quenching) with the same quencher but the effect of static quenching was larger than that of dynamic quenching. Large static and dynamic quenching constants for both OFL and FLU support significant ion-dipole and orbital-orbital interactions between fluorophore and quencher. For both molecules, the static and dynamic quenching constants by $Cu^{2+}$ were the largest among all the metal quenchers examined in this study. In addition, both the static and dynamic quenching mechanisms by $Cu^{2+}$ were somewhat different from the quenching caused by other metals. Between $Ni^{2+}$ and FLU, a different form of chemical interaction was observed compared with the interaction by other metals. The change in the absorption spectra as a result of the addition of a quencher provided information on static quenching. With all these metals, the static quenching constant of FLU was larger than those of OFL. The fluorescence of OFL was quite insensitive to both the dynamic and static quenching compared with FLU. This property of OFL can be explained by the twisted intramolecular charge transfer in the excited state.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.527-530
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• v.28 no.9
• /
• pp.1573-1578
• /
• 2007

Fluorescence quenching of norfloxacin (NOR) by Cu2+, Ni2+, Co2+ and Mn2+ was studied in water. The change in the fluorescence intensity and lifetime was measured as a function of quencher concentration at various temperatures. According to the Stern-Volmer plots, the NOR was quenched both by collisions and complex formation with the same quencher. However, the static quenching had a more important effect on the emission. Large static and dynamic quenching constants support significant ion-dipole and orbital-orbital interactions between NOR and cations. The both quenching constants by Cu2+ were the largest among quenchers. Also, quenching mechanism of Cu2+ was somewhat different. The change in the absorption spectra due to the quencher provided information on static quenching. The fluorescence of NOR was relatively insensitive to both the dynamic and static quenching compared with other quinolone antibiotics. This property can be explained by the twisted intramolecular charge transfer.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.328-336
• /
• 2005

Effects of surface defect distribution on flame instability during flame-surface interaction are experimentally investigated. To examine the chemical quenching phenomenon, we prepared thermally grown silicon oxide plates with well-defined defect density. Ion implantation was used to control the number of defects, i.e. oxygen vacancies. In an attempt to preferentially remove the oxygen atoms from silicon dioxide surface, argon ions with low energy level from 3keV to 5keV were irradiated at the incident angle of $60^{\circ}C$. Compositional and structural modification of $SiO_2$ induced by low-energy $Ar^+$ ion irradiation has been characterized by Atomic Force Microscopy (AFM) and X-ray Photoelectron Spectroscopy (XPS). The analysis shows that as the ion energy increases, the number of structural defect also increases and non-stoichiometric condition of $SiO_x(x{\le}2)$ plates is enhanced. From the quenching distance measurements, we found out that when the surface temperature is under $300^{\circ}C$, the quenching distance decreases on account of reduced heat loss; as the surface temperature increases over $300^{\circ}C$, however, quenching distance increases despite reduced heat loss effect. Such aberrant behavior is caused by heterogeneous chemical reaction between active radicals and surface defect sites. The higher defect density, the larger quenching distance. This results means that chemical quenching is governed by radical adsorption and can be parameterized by the oxygen vacancy density on the surface.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.42-45
• /
• 1986

Quenching of excimer fluorescence from polystyrene-acrylic acid copolymers containing $Eu^{3+}$ has been studied in tetrahydrofuran solution using simple aromatic hydrocarbons as quenchers under steady-state conditions. Aromatic hydrocarbons quenched collisionally the excimer fluorescence and their rate constants of quenching were determined. The magnitude of quenching constant is interpreted in terms of the cube root of the molar volume of quencher. Cycloalkanes were not effective in quenching the excimer fluorescence possibly due to different solubility characteristics from aromatic hydrocarbons.

• Journal of the Korean Chemical Society
• /
• v.8 no.2
• /
• pp.43-46
• /
• 1964

Quenching constants, q, determined for N,N-dimethylanilines by liquid scintillation counting indicate that the quenching involves an energy transfer process to these compounds causing strong n-${\pi}$ interaction within the quencher molecule, which is then followed by an non-radiative degradation of the excitation energy to ground state.

• Journal of the Korean Society of Combustion
• /
• v.10 no.2
• /
• pp.1-8
• /
• 2005

Incomplete combustion due to quenching in a narrow confinement has been a major problem for realization of a reliable micro combustion device. In most micro combustors, effects of flows are absent in the quenching because the flow is laminar and no severe stretch is present. In such circumstance, quenching is caused either by heat loss or by removal of active radicals to the wall surface of the confinement. An experimental investigation was carried out to investigate the relative significance of these two causes of quenching of a premixed flame. A premixed jet burner with a rectangular cross section at the exit was built. At the burner exit, the flame stands between two walls with adjustable distance. The gap between the two walls at which quenching occurs was measured at different wall surface conditions. The results were analyzed to estimate the relative significance of heat loss to the wall and the removal of radicals at the surface. The measurements indicated that the quenching distance was independent of the wall surface characteristics such as oxygen vacancy, grain boundary, or impurities at low temperature. At high temperature, however, the surface characteristics strongly affect the quenching distance, implying that radical removal at the wall plays a significant role in the quenching process.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3593-3596
• /
• 2012

The water-soluble conjugated polymer with fluorescence quenching as a result of electrostatic interaction and aggregation was synthesized through Suzuki polymerization. The absorption and emission of anionic polymer (a-PFP) is blue shifted as compared with cationic polymer (c-PFP) although getting same backbone, and the absolute PL quantum efficiency of a-PFP in water is over 90% due to good solubility in aqueous solution. We anticipate that the fluorescence quenching of anionic and cationic polymers, with same conjugated backbone, could be shown in aqueous solution.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.3
• /
• pp.259-260
• /
• 2001