• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.361-364
• /
• 2006

Generally, aging of paper is evaluated by folding endurance and degree of yellowing. It was known as that lignin, hemicellulose and metallic ion affect yellowing of mechanical or chemical pulps. Among these elements, especially, the study of hemicellulose that affect at yellowing of pulp is insufficient. In this study, we examined into the influence that glucuronoxylan or glucomannan and metallic ion($Cu^{2+},\;Fe^{2+},\;Fe^{3+},Mn^{2+}$) residued in pulp get each or when mixed at yellowing. Filter paper was treated with each metallic ion, glucuronoxylan and the mixture of glucuronoxylan and metal ions, and brightness and CIE $L^*a^*b^*$ was measured after accelerated aging. As the results of measurements, the filter paper processed by 10% glucuronoxylan was dropped 2-3% on the brightness after accelerated aging for 24 hours. Also, the filter paper treated with glucuronoxylan and $Fe^{2+}$ was dropped 7% on the brightness.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.42-49
• /
• 1999

Although many researches have been made on the adsorption of cationic starches onto chemical pulp fibers, only limited studies have been reported for deinked pulp(DIP) and thermomechanical pulpI(TMP). In this experiment, the adsorption behavior of the cationic starches onto DIP and TMP fibers investigated. Almost complete adsorption of cationic starches onto the pulp fibers were observed when the addition rate of starch was low. Adsorption ratio decreased abruptly when 3.5% and 4.0% of cationic starches were adsorbed onto deinked pulp and thermomechanical pulp, respectively. Adsorption of cationic starches increased as the degree of substitution decreased and as the pH of the pulp slurry increased. TMP fibers adsorbed more cationic starches than DIP because of its greater charge density, and this led to greater improvement in strength properties for the TMP sheets.

• Journal of the Korean Wood Science and Technology
• /
• 제33권3호통권131호
• /
• pp.79-88
• /
• 2005

연구는 폐표고목을 제지용 원료로 활용하기 위한 기초자료로 1년부터 5년 동안 재배한 표고골목을 이용하여 목재 성분 조성과 크라프트 펄프화 특성을 평가하였다. 그 결과 화학조성의 경우 변재에서는 재배기간이 증가함에 따라 글루코스와 자일로스의 감소가 크게 나타났으나 심재부에서는 큰 차이가 나타나지 않았으며 정선수율과 리젝트 함량 모두 재배기간이 증가함에 따라 감소하였다. 펄프 특성에서도 재배기간 증가에 따라 섬유장과 폭, 여수도는 감소하였으며 폐표고골목 크라프트 펄프를 국산 폐골판지에 첨가 시 종이의 건조 강도가 향상되었다. 이상의 결과로 폐표고목 크라프트 펄프를 다른 장섬유 펄프와 혼합사용 시 강도 향상과 고해 에너지 감소를 기대할 수 있을 것으로 사료된다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 춘계학술발표논문집
• /
• pp.167-173
• /
• 2006

Deinking is a series of unit operations designed to detach ink from cellulose fibers and separate the dispersed ink from the pulp slurry. Deinking chemicals are process aids that enable expensive mill equipment used in these unit operations to operate more efficiently - often much more efficiently. We propose the blended deinking agent with cellulolutic enzymes and synthetic collector in deinking pulp of conventional alkaline method. The deinking efficiency of old news print in alkaline pH was enhanced with enzyme treatments. The brightness of deinked pulp was increased with less residual ink particles and yield of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method. Enzymes in biomass were use to Chemical Deinking for reduce environment pollution through surfactant and improve surfactants. examining into compatibility Enzymes and surfactants, these new materials are studied efficiency of deinking efficiency.

• 펄프종이기술
• /
• 제36권4호
• /
• pp.33-40
• /
• 2004

A white light interferometery (WLI) method for investigating surface microstructure was introduced. Brief description of the principle of this method was provided. The surface structure of various samples, for example, a liner board paper, a pigment coated paper, a intaglio printed paper and a polymer laminated paper were tested and characterized with the WLI method. The data showed the WLI method provided very detailed information about surface topography, which were little affected by the surface condition such as color, opacity, roughness, etc. The data stitching mode of the WLI method could provide high spatial resolution over a large field-of-view, which made it possible to obtain the statistically valid results. Fast and high repeatability also made this method a promising way for investigating the surface micro-structure of paper products and prints.

• 펄프종이기술
• /
• 제29권3호
• /
• pp.51-59
• /
• 1997

Dissolving pulp is a low yield(30∼35%) bleached chemical pulp that has a high cellulose content (95% or higher) suitable for use in cellulose derivatives such as rayon, cellulose acetate. This research was studied for dissolving pulp preparation as the raw material of viscose rayon from commertial pulps. (TMP, CP, DIP) In the change of pulp(cellulose) characteristics after sodium hypochlorite and solvolysis treatment. the following results were obtained In the case of sodium hypochlorite pretreatment, we have obtained pulp that high purity cellulose, but degree of polymerization was inclined to decrease less than 170∼240. Comparing sodium hypochlorite pretreatment and solvolysis pretreatment, solvolysis pretreatment is superior to sodium hypochlorite process for making dissolving pulp. We think that the low degree of polymerization of cellulose because of increasing degradation of cellulose during delignification treatment.

• Journal of the Korean Wood Science and Technology
• /
• 제8권3호
• /
• pp.64-76
• /
• 1980

Fig. 8 summarizes the present status of high yield pulp production and the directions of research on modification. A thick line indicates pulping process presently in use. As mentioned previously, one kind of modification is to introduce hydrophilic groups onto the pulp. Still unsolved is whether or not the introduction of hydrophilic groups should be restricted to lignin only. Goring (28) reported that middle lamella lignin has fewer phenolic hydroxyl groups than cell wall lignin and suggested that such a difference in the lignin may be useful in the removal of middle lamella lignin. The introduction of hydrophilic groups onto pulp may not be enough to modify high yield pulp. The removal of some portion of carbohydrate may be also necessary from the standpoint of softening of pulp fibers. There is no information at what lignin and carbohydrate, and how much should be removed. The combination with synthetic high polymers may also be important in modifying high yield pulp. Prof. C. Schuerch of the State University of New York who was a visiting professor at the University of Tokyo in 1974, mentioned that the hydrophilicity of lignin would be promoted, if phenolic hydroxyl or carboxyl groups could be introduced into the aromatic nucleus of lignin. If this were possible. this process would also mean a pulp yield of more than 100%. This idea is just one example of the expectation made possible through lignin chemistry. Instead of the introduction of hydrophilic group, the oxidative degradation of aromatic nucleus of lignin may also be useful in promoting the hydrophilicity of pulp. In this case, ozone may be an excellent chemical. However, there are a lot of problems to be solved such as homogeneity of reaction and selectivity of ozone for lignin. The above ideas are summarized in Fig. 9. There are many problems to be solved in the production of an excellent high yield pulp which is comparable to chemical pulp. The information from wood chemistry hopefully will elucidate some of the problems mentioned above.

• 펄프종이기술
• /
• 제39권1호
• /
• pp.8-15
• /
• 2007

In an effort to develop control strategies for the wet-end of paper machines, dynamic models for retention and formation processes have been developed. The retention process, including headbox total and filler consistencies, white water total and filler consistencies, the basis weight and the ash content of paper, can be modeled from first-principles (mass balances). To include the effect of wet-end chemistry variables, first-pass retention was included as a parameter dependent on operating conditions. In addition, dynamics of formation was simulated by developing an empirical model of formation and coupling with the dynamic models for the retention process. A series of experiments were performed using a pilot paper machine. The experimental results and the model predictions showed relatively good agreement.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.428-433
• /
• 2009

Cellulose triacetate (CTA) was prepared from cotton linter and pulps which contain various contents of $\alpha$-cellulose. CTA which contains 2.8 of degree of substitution (DS) and 222 of degree of polymerization (DP) was obtained from V-81 pulp under the heterogeneous system. The DS was measured by the titration method, and the DP was obtained by measurement of viscosity. FT-IR spectometer (FT-IR 6300, JASCO) was used to analyze the chemical structure of raw materials and cellulose triacetate, and X-ray diffractometer (X-pert MPD PW3040, Philips) was used to confirm the crystal structure and to calculate the relative crystallinity index (RCI). As $\alpha$-cellulose content in pulp increased, the acetylation yield increased. Besides with a kind of pulp, it contains insoluble residue which was mainly formed due to the formation of glucomannan triacetate and xylan diacetate during the esterification.

• Journal of the Korean Wood Science and Technology
• /
• 제2권3호
• /
• pp.39-41
• /
• 1974

Bastard indigo, prevailing shrub species planted in erosion control work to constitute vegetation, is proved to be usefull for pulp material other than existing usage of green manure or fuel. Pulp made from bastard indigo is good enough for filler pulp though the quality of it is not remarkably excellent. (1) Sorts of paper possible to make from this pulp. Packing paper of medium grade. (general packing paper except heavy packing) (2) Traits of this pulp as for pulp material (A) It is more preferable than annual plants in these respects, ego collection, transport and storage of pulp material, and yield, freeness and chemical consumption of pulp. (B) Annual probable production of pulp material per ha from this plant is higher than that from long-term tree species or similar to that from fast growing species. (C) Its cultivation on eroded area is welcomed and consecutive annual production of material by copice method is also proved possible.