• Geomechanics and Engineering
• /
• 제23권2호
• /
• pp.103-113
• /
• 2020

Gypsiferous soils classified as problematic soils due to the dissolution of gypsum. Presence of gypsum in the soils texture subjected to steady flow can cause serious damages for the buildings, roads and water transmission canals. Therefore, researchers have conducted a series of physical, mechanical and microstructural laboratory tests to study the effect of gypsum leaching on the geotechnical properties of a lean clay containing 0%, 3%, 6%, 9%, 12%, and 15% raw gypsum. In addition, a combination of two nano-chemical stabilizers named Terrasil and Zycobond was used in equal proportions to stabilize the gypsiferous clayey samples. The results indicated that gypsum leaching considerably changed the physical and mechanical properties of gypsiferous soils. Further, adding the combination of Terrasil and Zycobond nano-polymeric stabilizers to the gypsiferous soil led to a remarkable reduction in the settlement drop, compressibility, and electrical conductivity (EC) of the water passing through the specimens, resulting in improving the engineering properties of the soil samples. The X-ray diffraction patterns indicate that stabilization by terrasil and zycobond causes formation of new peaks such as CSH and alteration of pure soil structure by adding raw gypsum. Scanning electron microscope (SEM) images show the denser texture of the soil samples due to chemical stabilization and decrease of Si/Al ratio which indicates by Energy dispersive X-ray (EDS) interpretation, proved the enhance of shear strength in stabilized samples.

• Elastomers and Composites
• /
• 제36권4호
• /
• pp.262-267
• /
• 2001

내전압 특성과 항균성을 갖는 절연 고무장갑을 제조하기 위해 천연고무 라텍스 (NRL)와 수분산성 폴리우레탄 (PU) 그리고 4급 아민 키토산 (4N-chitosan)을 배합하여 침지법으로 제조하였다. 절연 고무장갑의 기계적인 특성은 폴리우레탄 함량이 증가할수록 인장강도는 증가하였으나 신장율은 저하되었으며, 노화후 인장강도 및 신장율의 잔존율은 폴리우레탄 함량 증가에 따라 증가하였다. 또한, 리칭시간이 증가할수록 내전압 특성이 증가하였으며, 3시간의 리칭시간에서 10000V의 내전압 성능을 나타내었다. 고무장갑에 4N-chitosan을 첨가한 결과 균이 거의 생존하지 않았다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.424-433
• /
• 2006

This paper studies the field applicability of the Special Chemical grouting Method(SCM) in reinforcing and reducing permeability of the back of an existing continuous wall. SCM uses double rod which imposes intermediate pressure$(981\sim9,810kPa)$ to disturb, cut, discharge, and mix the ground. It is observed that a bulb is formed by using cement paste and environmentally friendly injection materials with minimal alkali leaching. Uniaxial compression tests, test for chemical properties and fish poison test are performed. Test results indicate that the method results in higher durability, less leaching through use of the environmentally friendly injection material, and faster mobilization of the strength. In addition, field tests confirm the formation of the bulb and the seepage cutoff wall.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.511-514
• /
• 2003

The objective of this study is to investigate the vertical variation of heavy metals in tailings from the Sangdong W mine. Tailings samples were taken at 6 drilling sites with 50cm intervals up to 21 meters in depth and dried at room temperature. The pH value, loss-on-ignition and water contents were measured. In addition, chemical compositions of the samples were determined by AAS after 0.1 N HCl leaching and ICP-AES after aqua regia leaching. The pH values were in the range of 7.4 to 9.5 due to chemical reactions of carbonate minerals. The ranges of heavy metals (mg/kg) extracted by 0.1N HCl were from 0.17 to 0.93 for Cd, 0.04 to 4.39 for Cu, 0.03 to 10.9 for Pb and 0.06 to 14.1 for Zn and those extracted by aqua regia were $3.10\~10.5,\;23.61\~251,\;63.7\~337\;and\;42.6\~134$ for Cd, Cu, Pb and Zn, respectively. Generally, the metal concentrations in tailings extracted by 0.1N HCl decreased with depth, whilst those extracted by aqua regia have a tendency to increase with depth in some case. Those trends might be due to the change of oxidation-reduction condition of the tailings.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.52-55
• /
• 2003

The objective of this study is to investigate the vertical variation of heavy metals in tailings from the Sangdong W mine. Tailings samples were taken at 6 drilling sites with 50cm intervals up to 21meters in depth and dried at room temperature. The pH value, loss-on-ignition and water contents were measured. In addition, chemical compositions of the samples were determined by AAS after 0.1N HC1 leaching and ICP-AES after aqua regia leaching. The pH values were in the range of 7.2 to 8.5 due to chemical reactions of carbonate minerals. The ranges of heavy metals (mg/kg) extracted by 0.1N HC1 were from 0.17 to 0.93 for Cd, 0.04 to 4.39 for Cu, 0.03 to 10.9 for Pb and 0.06 to 14.1 for Zn and those extracted by aqua regia were 3.10~10.5, 23.61 ~251, 63.7~337 and 42.6~134 for Cd, Cu, Pb and Zn, respectively. Generally, the metal concentrations in tailings do not change with depth, with they have a tendency to decrease with depth in some case.

• 에너지공학
• /
• 제26권4호
• /
• pp.74-83
• /
• 2017

Coal-fired power plants supply roughly 50 percent of the nation's electricity but produce a disproportionate share of electric utility-related air pollution. Coal combustion technology can facilitate volume reduction of up to 90%, with the inorganic contaminants being captured in furnace bottom ash and fly ash residues. These disposal coal ash residues are however governed by the potential release of constituent contaminants into the environment. Accelerated carbonation process has been shown to have a potential for improving the chemical stability and leaching behavior of bottom ash residues. The aim of this work was to quantify the volume of $CO_2$ that could be sequestrated with a view to reducing greenhouse gas emissions and stabilize the contaminated heavy metals from bottom ash samples. In this study, we used PC boiler bottom ash, Kanvera reactor (KR) slag and calcined waste lime for measuring chemical analysis and heavy metals leaching tests were performed and also the formation of calcite resulting from accelerated carbonation process was investigated by thermo gravimetric and differential thermal analysis (TG/DTA).

• 한국지반공학회논문집
• /
• 제22권12호
• /
• pp.25-31
• /
• 2006

본 논문에서는 주열식말뚝 배면의 차수를 목적으로 쓰이는 SCM공법의 지반강도와 투수계수 개선 효과를 연구하였다. SCM공법은 2중관 롯드를 사용하여 중압($981{\sim}9,810kPa$)으로 지반을 절삭하고 충전 및 혼합하는 공법이다. 이는 시멘트와 알카리용탈이 최소화된 친환경적인 약액을 사용하는 것으로 실험을 통하여 입증하였다. 1축압축시험, 어독성시험 등을 통하여 화학적인 안정성을 실험하였고, 그 결과 내구성이 높고 조기강도 발현이 되며 알칼리용탈이 최소화된 친환경적인 약액재료임을 입증하였다. 그리고 현장시험을 통하여 구근과 차수벽이 형성됨을 확인하였다.

• 자원리싸이클링
• /
• 제19권2호
• /
• pp.54-62
• /
• 2010

본 연구는 석탄폐석을 폐갱도 충전용 골재로 사용 할 때 나타날 수 있는 문제점을 파악하고 그 해결 방안을 제시하기 위하여 수행되었으며, 석탄폐석이 가장 많이 적치되어 있는 태백지역의 함태 탄광 석탄폐석을 대상으로 석탄폐석의 물성, 석탄폐석으로부터 산성광산배수(AMD)의 발생 특성, 석탄폐석으로부터 중금속의 용출 특성 등을 조사하였다. 석탄폐석의 물성 연구에서는 석탄폐석의 입도분포, 입단별 화학조성 및 중금속 분포, 광물조성 등이 조사되었으며, 석탄폐석으로부터 AMD 발생 특성 연구에서는 시간, 온도, 황철석의 함량, 황화물의 종류, 폐석의 입도, 공존암의 종류 등이 AMD 발생에 미치는 영향을 조사하였고, 중금속 용출 특성 연구에서는 석탄폐석 만을 사용한 경우와 석회석과 석탄폐석을 혼합하여 안정화 시킨 시료를 대상으로 폐기물공정시험법, TCLP법, 장기연속추출법(컬럼시험)에 의한 중금속 용출 특성을 조사하였다. 연구 결과로부터 석탄폐석은 폐갱도 충전용 등의 골재로 재활용이 가능하나 지하수에 침수상태에 있는 폐갱 속에 석탄폐석 만을 투입하여 충전하면 충전 후 12일 경부터 AMD가 발생할 것으로 예측된다. AMD가 발생하면 높은 수소이온농도 때문에 폐갱 내 잔류하는 철재류 등으로부터 중금속의 용출을 가속화 하는 등 환경 요염의 염려가 있고, AMD의 발생을 막기 위해서는 석회석을 4%이상 혼합하여야 함을 알았다.

• Environmental Engineering Research
• /
• 제21권1호
• /
• pp.15-21
• /
• 2016

Magnesium potassium phosphate cement (MKPC) is an effective agent for solidification/stabilization (S/S) technology. To further explore the mechanism of the S/S by MKPC, two kinds of Cd including $Cd(NO_3)_2$ solution (L-Cd) and municipal solid waste incineration fly ash (MSWI FA) adsorbed Cd (S-Cd), were used to compare the effects of the form of heavy metal on S/S. The results showed that all the MKPC pastes had a high unconfined compressive strength (UCS) above 11 MPa. For L-Cd pastes, Cd leaching concentration increased with the increase of Cd content, and decreased with the increase of curing time. With the percentage of MSWI FA below 20%, S-Cd pastes exhibited similar Cd leaching concentrations as those of L-Cd pastes, while when the content of MSWI FA come up to 30%, the Cd leaching concentration increased significantly. To meet the standard GB5085.3-2007, the highest addition of S-Cd was 30% MSWI FA (6% Cd contained), with the Cd leaching concentration of 0.817 mg/L. The S/S of L-Cd is mainly due to chemical fixation, and the hydration compound of Cd was $NaCdPO_4$, while the S/S of S-Cd is due to physical encapsulation, which is dependent on the pore/crack size and porosity of the MKPC pastes.

• 자원리싸이클링
• /
• 제4권3호
• /
• pp.26-31
• /
• 1995

환원제로서 동매트를 사용하여 희박 염삼 용액에서 망간 단괴 침출 특성을 조사하였다. 동매트는 망간 단괴 침출에 있어서 매우 효과적인 환원제였으며 2.5M 용액으로 용액온도 $70^{\circ}C$에서 2시간 침출하는 경우 금속의 침출율은 각각 Mn 96%, Ni 95%, Co 91%, Cu 88%, Fe 36%였다. Mn, Co 및 Ni의 침출은 동매트의 첨가량에 의존하였으며 고체와 액체의 비율 또한 침출에 큰 영향을 미쳤다. 또한 침출용액의 온도 증가는 각 금속의 침출율을 향상시켰다. 망간 단괴로부터 Mn, Co, Ni 및 Cu의 침출속도는 동매트를 환원제로 사용하는 경우 표면 화학반응과 세공 확산에 의해 지배되었으며 이때의 각 금속의 활성화 에너지를 구한 결과 Mn, Co, Ni, Cu는 17.6, 12.8, 17.2 및 57.9 Kcal/mol이었다.