• Bulletin of the Korean Chemical Society
• /
• v.20 no.4
• /
• pp.422-426
• /
• 1999

The Grignard reactions of bis(chloromethyl)dimethylsilane (1) with trimethylchlorosilane (2) in THF give both the intermolecular C-Si coupling and intramolecular C-C coupling products. At beginning stage, 1 reacts with Mg to give the mono-Grignard reagent ClCH2Me2SiCH2MgCl (1) which undergoes the C-Si coupling reaction to give MC2Si(CH2SiMe3)2 3, or C-C coupling to a mixture of formula Me3SiCH2(SiMe2CH2CH2)nR1 (n = 1, 2, 3, ..; 4a, R1I = H: 4b, R1 = SiMe3). In the reaction, two reaction pathways are involved: a) Ⅰ reacts with 2 to give Me3SiCH2SiMe2CH2Cl 6 which further reacts with Mg to afford a Me2SiCH2Mel-SiCH2MgCl (Ⅱ) or b) I cyclizes intramolecularly to a silacyclopropane intermediate A, which undergoes a ring-opening polymerization by the nucleophilic attack of the intermediates I or Ⅱ, followed by the termination reaction with H2O and 2, to give 4a and 4b, respectively. As the mole ratio of 2/1 increased from 2 to 16 folds, the formation of product 3 increased from 16% to 47% while the formation of polymeric products 4 was reduced from 60% to 40%. The intermolecular C-Si coupling reaction of the pathway a becomes more favorable than the intramolecular C-C coupling reaction of the pathways b at the higher mole ratio of 2/1.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.324-328
• /
• 1992

The $^1H$ NMR chemical shifts and coupling constants for ${\alpha}$-, permethyl-${\alpha}$-, ${\beta}$-and permethyl-${\beta}$-cyclodextrins in neutral aqueous media were assigned based on the 470MHz spectra. In order to obtain accurate chemical shifts and coupling constants the experimental spectra were analyzed with the Raccoon spin simulation program. The rotamer distribution around the$C_{5-}C_6$ bond of the cyclodextrins evaluated from the coupling constants of $J_{56a}$ and $J_{56b}$. In our calculation of the ${\alpha}$-, and ${\beta}$-cycliodextrin showed that gg conformers were most favorable form and tg conformers were least favorable form. It is very interesting to note the changes in $J_{56a}$, $J_{56b}$ coupling constants of permethylated ${\alpha}$- and ${\beta}$-cyclodextrins from unmodified one. The gg conformers were more increased than unmodified one and instead of tg conformers gt conformers were least favorable one upon methylation.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.187-188
• /
• 1988

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.237-245
• /
• 2001

A study was made on the chemical treatment of silica and silane coupling agents, bistriethox ysilylpropyltetrasulfide(Si 69) and ${\gamma}$-mercaptopropyltrimethoxy silane (MPS) for reinforcement of silica formulation. The effects of chemical treatment method and the most popular two coupling agents were examined. The results clearly indicate that the wet method, coupling agent is combined chemically with the silica prior to mixing, has more dispersion, wetting ability, dynamic properties and stability than the dry method, coupling agent is premixed directly with the silica. The mixing was done using a bench-type kneader having two mixing cam and a two-roll mill, under approximately similar conditions. The physical properties of SBR vulcanizates give rise to marked improvements by addition of Si 69 and MPS in comparison with without silane coupling agents. The optimum amount of Si 69 and MPS was 2 w/w% by experiments in the dry method but was 4 w/w% by EA and TGA analysis in the wet method.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2005.11a
• /
• pp.79-83
• /
• 2005

• Journal of Adhesion and Interface
• /
• v.8 no.1
• /
• pp.15-27
• /
• 2007

Polyimide (PI) surface modification was carried out by ion-beam treatment and silane-imidazole coupling agent to improve the adhesion between polyimide film and copper. Silane-imidazole coupling agent contains imidazole functional groups for the formation of a complex with copper metal through a coordination bonding and methoxy silane groups for the formation of siloxane polymers. The PI film surface was first treated by argon (Ar)/oxygen ($O_2$) ion-beam, followed by dipping it into a modified silane-imidazole coupling agent solution. The results of X-ray photoelectron spectroscopy (XPS) spectra revealed that the $Ar/O_2$ plasma treatment formed oxygen functional groups such as hydroxyl and carbonyl groups on the polyimide film surface and confirmed that the PI surface was modified by a coupling reaction with imidazole-silane coupling agent. Adhesion between copper and the treated PI film by ion-beam and coupling agent was superior to that with untreated PI film. In addition, adhesion of PI film treated by an $Ar/O_2$ plasma to copper was better than that of PI film treated by a coupling agent. The peeled-off layers from the copper-PI film joint were completely different in chemical composition each other. The layer of PI film side showed similar C1s, N1s, O1s spectra to the original Upilex-S and no Si and Cu atoms appeared. On the other hand the layer of copper side showed different C1s and N1s spectra from the original PI film and many Si and Cu atoms appeared. This indicates that the failure occurs at an interface between the imidazole-silane and PI film layers rather than within the PI layers.

• Journal of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.65-74
• /
• 1979

An effect of the spin-orbit coupling interaction of ligand orbitals on the ground state for octahedral $[Ti(Ⅲ)A_3B_3]$, $ [V(Ⅲ)A_3B_3]$, $ [Fe(Ⅲ)A_3B_3]$ and $ [Ni(Ⅱ)A_3B_3]$ type complexes has been investigated in this work, applying the degenerate perturbation theory. The wave functions are not affected but the energy level splitting for the ground state of these complexes by the spin-orbit coupling interaction of ligand orbitals. The extent of effect on the energy level splitting for the ground state is decreased in order Ti(Ⅲ) > V(Ⅲ) > Fe(Ⅲ).

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.230-236
• /
• 2020

In this study, an adhesive tape with water and impact resistance for mobile devices was developed using a UV-curable urethane acrylate based polymer as a substrate. The substrate fabricated by UV-curable materials shows hydrophobicity and poor wettability, which significantly deteriorates the interface-adhesions between the substrate and acrylic adhesive. In order to improve the interface adhesion, 3-glycidoxy-propyl trimethoxysilane (GPTMS), a silane coupling agent having epoxy functional groups, was selected and incorporated into UV-curable urethane acrylate based polymer resins in various contents. The changes of the chemical composition according to the contents of GPTMS was studied with Fourier-transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) to know the surface bonding properties. Also mechanical properties of the substrate were characterized by tensile strength, gel fraction and water contact angle measurements. The peel strengths at 180° and 90° were measured to compare the adhesion between the substrate and adhesive according to the silane coupling agent contents. The mechanical strength of the urethane acrylate adhesive tape decreased as the silane coupling agent increased, but the adhesion between the substrate and adhesives increased remarkably at an appropriate content of 0.5~1 wt%.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.151-157
• /
• 2014

We have reported the reaction probability, integral reaction cross section, and rate constant for the title system calculated with the aid of a time-dependent wave packet approach. The ab initio potential energy surface (PES) of Prudente et al. (Chem. Phys. Lett. 2009, 474, 18) is employed for the purpose. The calculations are carried out over the collision energy range of 0.05-1.4 eV for the two reaction channels of H + LiH ${\rightarrow}$ Li + $H_2$ and $H_b$ + $LiH_a$ ${\rightarrow}$ $LiH_b$ + $H_a$. The Coriolis coupling (CC) effect are taken into account. The importance of including the Coriolis coupling quantum scattering calculations are revealed by the comparison between the Coriolis coupling and the centrifugal sudden (CS) approximation calculations.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.42-48
• /
• 2013

Potassium N-heterobiaryltrifluoroborates were successfully prepared via a selective Cu-catalyzed C-N coupling reaction. The $BF_3K$ moiety was well tolerated under the reaction conditions involving CuI and dimethyl-ethylenediamine (DMEDA) in the presence of DMSO. The Pd-catalyzed Suzuki-Miyaura cross couplings of potassium N-heterobiaryltrifluoroborates with bromoarenes were studied to prepare the N-heterotriaryl compounds. Moreover, homocoupling, iodination, and hydroxylation of potassium N-heterobiaryltrifluoroborates provided the corresponding products in high yields.