• Economic and Environmental Geology
• /
• v.26 no.4
• /
• pp.455-464
• /
• 1993

Some nodules occur in the Milyang pyrophyllite deposit which are hydrothermal alteration products by Late Cretaceous andesitic tuff. These nodules are divided into two types on the basis of mineral assemblages; diaspore and pyrophyllite nodules. The diaspore nodules consist mainly of diaspore, kaolinite, pyrophyllite and pyrite with a small amounts of wavellite and tourmaline. They are light purplish grey in color, ellipsoid in shape and range 1 cm to 15 cm in size. A small or large diffuse band exists in some nodules. The platy coarse-grained diaspore is intergrown with the fine-aggregated kaolinite in the central part of the nodule. It appears that the grain size become fine from center to margin. The pyrophyllite nodules, which have the same shape with diaspore nodules, consist dominantly of pyrophyllite accompanied by small amounts of quartz, kaolinite, svanbergite, wavellite, tourmaline and apatite. Chemical compositions of alteration zones and nodules show that the wall rock alteration involved mainly the removal of large quantities of silica and alkalies and small quantities of Ca, Mg and Fe. The sharp increase in the Al content of the nodules is the result of residual concentration of alumina by the leaching of the mobile components. The pyrophyllite nodules were formed in the fluid saturated with quartz as ${\mu}_{HK_{-1}}$ and ${\mu}_{H_{2}O}$ increase. Under this condition, the pyrophyllite-kaolinite-quartz assemblage was stable. Diaspores formed from pyrophyllites in the fluid undersaturated with quartz as ${\mu}_{H_{2}O}$ increases (decreasing temperature). Under this condition, diaspore-pyrophyllite-kaolinite assemblage become stable. The formation temperature of the nodules on the basis of mineral assemblage is estimated as $275{\sim}340^{\circ}C$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.137-145
• /
• 2009

The steady-state kinetics of the selective catalytic reduction (SCR) of $NO_X$ with $NH_3$ has been investigated over a commercial ${V_2}{O_5}/TiO_2$ catalyst. In order to account for the influence of transport effects the kinetics are coupled with a fully transient two-phase 1D+1D monolith channel model. The Langmuir-Hinshelwood (L-H) mechanism is adopted to describe the steady-state kinetic behavior of the ${V_2}{O_5}/TiO_2$ catalyst. The reaction rate expressions are based on previously reported papers and are modified to fit the experimental data. The steady-state chemical reaction scheme used in the present mathematical model has been validated extensively with experimental data of selective $NO_X$ reduction efficiency for a wide range of inlet conditions such as space velocity, oxygen concentrations, water concentration, and $NO_2/NO$ ratio. The parametric investigations are performed to examine how the $NH_3$ slip from a SCR $DeNO_X$ catalyst and the conversion of $NO_X$ are affected by the reaction temperature, $NH_3/NO_X$ feed ratio, and space velocity for feed gas compositions with $NO_2/NO_X$ ratios of 0 and 0.5.

• Korean journal of food and cookery science
• /
• v.9 no.2
• /
• pp.82-87
• /
• 1993

This experiment was carried out to determine the total dietary fiber content and free sugar, fatty acid, amino acid compositions in bamboo shoot, lotus root and burdock. Bamboo shoot contained 3.05% of proteins, 0.48% of lipids, 2.45% of fibers, which were larger than those of other samples (lotus root and burdock). Burdock contained more sugars than the others as 18.64%. On a dry matter basis, total dietary fiber by Prosky AOAC method were 62.5% for bamboo shoot, 17.9% for lotus root and 41.9% for burdock. Therefore, the content of dietary fiber in bamboo shoot was the most abundant among them. Free sugar contents (glucose, fructose and sucrose) of the sample were analyzed by HPLC. Sucrose was the most abundant in both bamboo shoot and lotus root, and the content of fructose and sucrose in burdock were almost same. The major fatty acids in bamboo shoot, lotus root and burdock analyzed by GC were palmitic and linoleic acid. Also, linolenic acid were abundent only in bamboo shoot. The results of amino acid analysis showed that aspartic acid, glutamic acid and Iysine were the most abundent amino acids in the sample. Bamboo shoot contained large percentage of protein, the sweet-tasting amino acids and lipid than the other samples. Therefore bamboo shoot can be used as a flavor material because they contain plenty of the sweet-lasting amino acid and free sugar. Bamboo shoot and burdock can be used as potential source of dietary fiber because of the high content of dietary fiber in those samples.

• The Journal of Korean Medicine
• /
• v.33 no.3
• /
• pp.160-183
• /
• 2012

Objectives: Coptidis Rhizoma is one of the most popular and multi-purpose herbs in traditional medicine. The purpose of this study was to contribute to research and applications of Coptidis Rhizoma in clinic, by analyzing and reviewing international studies on its chemical compositions and pharmacological effects. Methods: This study analyzed 344 articles published from 2000 to 2010 in PubMed, Refworks, Riss, and KTKP. The search keywords were "Coptis chinensis", "Coptis japonica", "Coptidis Rhizoma", "huanglian" and "huanglian in Chinese". From them, we selected 114 articles which met our inclusion criteria. Results: This study reviewed 114 articles on Coptidis Rhizoma and its active components in terms of 'Active components', 'Experimental studies', 'Clinical studies', 'Industrial use' and 'Side Effects/Toxicity'. Conclusions: The active components of Coptidis Rhizoma are berberine, coptisine, epiberberine, palmatine, jateorrhizine, magnoflorine, worenine, etc. It is reported that Coptidis Rhizoma and its active components have anti-inflammatory, antibacterial, antitumor, and antioxidant activity, and cardiovascular, hepatoprotective, antidiabetic, neuroprotective, gastrointestinal, pain relieving, discharge phlegm and metrocyte proliferation effects. Moreover, we found that Coptidis Rhizoma can be used for bath preparation, cosmetic products and as a natural antimicrobial substance.

• Journal of the Korean Ceramic Society
• /
• v.30 no.4
• /
• pp.325-331
• /
• 1993

Aqueous solutions of metallic salts, ZrO(NO3)2.2H2O and Y(NO3)3.5H2O were used as raw materials to synthesize crystalline submicron spherical powders of Zr0.94Y0.06O1.97 with tetragonal crystal phase. Each aqueous solution was mixed on the magnetic stirrer to homogenize for 12 hours. The concentration of the mixed solutionwas changed from 0.01mol/$\ell$ to 0.1mol/$\ell$ calculated as the concentration of Zr0.94Y0.06O1.97. Ultrafine droplets of starting mixed solution were sprayed by the ultrasonic vibrator and carried into the furnace kept at 55$0^{\circ}C$, $650^{\circ}C$, 75$0^{\circ}C$ and 85$0^{\circ}C$ using carrier gas of air (10$\ell$/min) and pyrolysed to form Y-TZP fine powders. The results of this exeriment were as follows. 1) Synthesized powders were nonagglomerated and spherical type. 2) Particle size distribution was narrow between 0.1${\mu}{\textrm}{m}$ and 1${\mu}{\textrm}{m}$. 3) Forming reaction Y-TZP was finished above synthetic temperature 75$0^{\circ}C$. 4) As the synthetic temperature rised from 55$0^{\circ}C$ to 85$0^{\circ}C$, the mean particle size decreased from 0.35${\mu}{\textrm}{m}$ to 0.22${\mu}{\textrm}{m}$ in the concentration of starting solution with 0.02mol/$\ell$. 5) At 75$0^{\circ}C$ of synthetic temperature, the concentration changes of starting solution from 0.01mol/$\ell$ to 0.1mol/$\ell$ increased the mean particle size from 0.24${\mu}{\textrm}{m}$ to 0.38${\mu}{\textrm}{m}$. 6) Chemical compositions of each synthesized particle were homogeneous nearly.

• The Journal of Natural Sciences
• /
• v.8 no.1
• /
• pp.47-51
• /
• 1995

Several intermediate glasses are investigated to bond the alumina and the hydroxyapatite (HAp). The chemical compositions of the intermediate glasses are chosen as $CaO-Al_2O_3$. The mole ratio of CaO/$Al_2O_3$ is changed from 0.5 to 3.0. The lowest melting is observed at $1355^{\circ}C$ in the specimen of CaO/$Al_2O_3$ at the mole ratio of 2. With increasing contents of $Al_2O_3$, the melting temperatures gradually increase and a number of pores are observed. The sectional microstructure shows that the good wetability is observed in higher contents of CaO specimens. This implies that the good wetability is obtained in the mole ratio range of CaO/$Al_2O_3geq2$. The phase transformations are observed after treatment but the major peaks of HAp still exist.

• Food Science and Preservation
• /
• v.7 no.1
• /
• pp.108-112
• /
• 2000

Proximate composition , volatile compounds, free amino acids, fatty acids and inorganic compounds in leaf, stem and root of Houttyunia cordata Thunb cultivated from two different area, Bosung and Sunchon , were analyzed. Each part of Houttuynia cordata Thunb from both local area showed moisture contents of 80-84% and crude ash contents of 2.1 ∼2.8%. Crude fat and protein contents were less than 3 % showing slightly higher contents in leaf than in both stem and root . Twenty six volatile compunds were identified from the parts of the plant, the volatile contents were high in the oder of leaf, root and stem. Major volatile compounds were mostly derivatives of decanoic acid ; decanoic acid, 20 tridecanoie, decanal and dodecanoic acid. Of free amino acids in leaf asparagine was the highest, while in stem hydroxyproline, proline and arginine were the major free amino acids. Linoleic acid was the highest in the stem and root, and linolenic acid was highest in leaf. the major minerals of all parts were K, Ca. Mg, P, Fe, Zn and Cu, showing highest with K.

• Corrosion Science and Technology
• /
• v.7 no.3
• /
• pp.139-144
• /
• 2008

The results of microstructure observations of the $Al_2O_3$ scale formed on a Fe-Cr-Al steel during high temperature oxidation in the $SO_2$ atmosphere are presented. Morphology of the scale has been studied by SEM and TEM techniques. Phase and chemical compositions have been studied by EDX and XRD techniques. The alumina oxide is a primary component of the scale. TEM observations showed that the scale was multilayer. The entire surface of the scale is covered with "whiskers", which look like very thin platelets and have random orientation. The cross section of a sample shows, that the "whiskers" are approximately $2{\mu}m$ high, however the compact scale layer on which they reside is $0.2{\mu}m$ thick. The scale layer was composed mainly of small equiaxial grains and a residual amount of small columnar grains. EDX analysis of the scale surface showed that the any sulfides were found in the formed outer and thin inner scale layer. A phase analysis of the scale formed revealed that it is composed mainly of the $\theta-Al_2O_3$ phase and a residual amount of $\alpha-Al_2O_3$.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1999.07a
• /
• pp.85-89
• /
• 1999

Somatic embryogendesis is one of good examples of the basic research for plant embryo development as well as an important technique for plant biotechnology. This paper describes the direct somatic embryogenesis from zygotic embryos of Panax ginseng is reversely related to normal axis growth of zygotic embryos by the experiment of various chemical treatments. Under the normal growth condition, the apical tips of embryo axis produced an agar-diffusible substance, which suppressed somatic embryo development from cotyledons. Although the cells of zygotic embryos were released from the restraint of embryo axis, various factors were still involved for somatic embryo development. Electron microscopic observation revealed that the ultrastructure of cells of cotyledon epidermis markedly changed before initiation of embryonic cell division, probably indicating reprogramming events into the cells embryogenically determined state. Polar accumulation of endogenous auxin or cell-cell isolation by plasmolysis pre-treatment is the strong inducer for the somatic embryo development. The cells for the process of somatic embryogenesis might be determined by the physiological conditions fo explants and medium compositions. Direct somatic embryos from cotyledons fo ginseng were originated eithrer from single or multiple cells. The different cellular origin of somatic embryos was originated either from single or multiple cell. The different cellular origin of somatic embryos was depended on various developmental stages of cotyledons. Immature meristematic cotyledons produced multiple cell-derived somatic embryos, which developed into multiple embryos. While fully mature cotyledons produced single cell-derived single embryos with independent state. Plasmolysis pretreatment of cotyledons strongly enhanced single cell-derived somatic embryogenesis. Single embryos were converted into normal plantlets with shoot and roots, while multiple embryos were converted into only multiple shoots. GA3 or a chilling treatment was prerequisite for germination and plant conversion. Low concentration of ammonium ion in medium was necessary for balanced growth of root and shoot of plantlets. Therefore, using above procedures, successful plant regeneration of ginseng was accomplished through direct single embryogenesis, which makes it possible to produce genetically transformed ginseng efficently.

• Macromolecular Research
• /
• v.16 no.8
• /
• pp.725-733
• /
• 2008

Polyimide (PI) multilayer thin films were prepared by spin-coating from a poly(amic acid) (PAA) and poly(amic acid) ammonium salt (PAAS). PI was prepared from pyromellitic dianhydride (PMDA) and 4,4'-oxydianiline (ODA) PAA. Different compositions of PAAS were prepared by incorporating triethylamine (TEA) into PMDA-ODA PAA in dimethylacetamide. PI multilayer thin films were spin-coated from PMDA-ODA PAA and PAAS. The PAAS comprising cationic and anionic moieties were spherical with a particle size of $20{\sim}40\;nm$. Some particles showed layers with ammonium salts, despite poor ordering. Too much salt obstructed the interaction between the polymer chains and caused phase separation. A small amount of salt did not affect the interactions of the interlayer structure but did interrupt the stacking between chains. Thermogravimetric analysis (TGA) showed that the average decomposition temperature of the thin films was $611^{\circ}C$. All the films showed almost single-step, thermal decomposition behavior. The nanostructure of the multilayer thin films was confirmed by X -ray reflectivity (XRR). The LF 43 film, which was prepared with a 4:3 molar ratio of PMDA and ODA, was comprised of uniformly spherical PAAS particles that influenced the nanostructure of the interlayer by increasing the interaction forces. This result was supported by the atomic force microscopy (AFM) data. It was concluded that the relationship between the uniformity of the PAAS particle shapes and the interaction between the layers affected the optical and thermal properties of PI layered films.