• Proceedings of the Korea Crystallographic Association Conference
• /
• 2004.11a
• /
• pp.6-6
• /
• 2004

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.272-272
• /
• 2002

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.1
• /
• pp.79-91
• /
• 2012

A curved fiber reinforced polymer (FRP) panel is produced with a certain width depending on allowances of manufacturing processes and facilities. An targeted arch-shaped structure could be built by sequential connection of series of the FRP panels. The connection manner between the FRP panels could be given by chemical treatment, mechanical treatment and hybrid method. Among those, the connection between the panels by chemical treatment is commonly adopted. Therefore, For an optimized design of the connected part between FRP pannels, a number of direct shear tests have been undertaken in terms of a number of parameters: surface treatment conditions, bonding materials, etc.. As results, surface grinding condition by sand paper or surface treatment by sand blasting appear properly acceptable methods, and epoxy and acryl resins are shown to be effective bonding materials for the purpose in this study.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.382-388
• /
• 2000

Hydrogenated amorphous carbon (a-C:H) films were fabricated by electron cyclotron resonance plasma-enhanced chemical vapor deposition. The bonding structure of carbon and hydrogen in the a-C:H films has been investigated by varying the deposition conditions such as ECR power, gas composition of methane and hydrogen, deposition time, and negative DC self bias voltage. The bonding characteristics of the a-C:H thin film were analyzed using FTIR spectroscopy. The IR absorption peaks of the film were observed in the range of $2800\sim3000 \textrm{cm}^{-1}$. The atomic bonding structure of a-C:H film consisted of $sp^3$ and $sp^2$ bonding, most of which is composed of $sp^3$ bonding. The structure of the a-C:H films changed from $CH_3$ bonding to $CH_2$ or CH bonding as deposition time increased. We also found that the amount of dehydrogenation in a-C:H films was increased as the bias voltage increased.

• Journal of Welding and Joining
• /
• v.15 no.5
• /
• pp.56-63
• /
• 1997

In The study, the bonding of WC-9%Co to SUJ2 steel using Ag-Cu-Zn-Cd insert metal has performed to investigate the bonding properties by heat-treatment. Bonding was brazed for 5-30min at 95$0^{\circ}C$, performed solution treatment for 5 min at 85$0^{\circ}C$ and sustained subsequently oil quenching. To investigate the effect of heat-treatment, tempering was executed at $600^{\circ}C$ for 30 min after oil quenching. Mechnical properties and chemical compositions on the brazed bonding interface were investigated by means of microstructural observation, 4-point bending test and EDS and XRD measurements. The results obtained were as follows. 1) The bonding strength of WC-9%Co/SUJ2 joints by Ag-Cu-Zn-Cd insert metal obtained about 78, 117 and 72MPa after brazing for 5, 20 and 30 min at 95$0^{\circ}C$. And the highest bonding strength obtained about 131MPa after brazing for10 min at 95$0^{\circ}C$ 2) Higher bonding strength of 288MPa was obtained in the joint that brazed for 10 min at 95$0^{\circ}C$, and carried out tempering for 30 min at $600^{\circ}C$ subsequently. 3) Fracture of joint brazed by Ag-Cu-Zn-Cd insert metal for 5, 10, 20 and 30 min created WC-9%Co/SUJ2 interface. The joint that brazed for 10 min at 95$0^{\circ}C$ and then tempered for 30 min at $600^{\circ}C$ was fractured at the site of WC-9%Co.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.413-423
• /
• 1998

Dental ceramics exhibit excellent esthetic property, compressive strength, chemical durability, biocompatibility and translucency. This study evaluated the shear bond strength of composite resin to the new heat-pressed ceramic material (IPS-Empress System) depending on the surface treatments and bonding agents. The surface treatments were etching with 4.0% hydrofluoric acid, application of silane, and the combination of the two methods. Composite resin was bonded to ceramic with four kinds of dentin bonding agents(All-Bond 2, Heliobond, Scotch bond Multi-purpose and Tenure bonding agents). The ceramic specimen bonded with composite resin was mounted in the testing jig, and the universal testing machine(Zwick 020, Germany) was used to measure the shear bond strength with the cross head speed of 0.5 mm/min. The results obtained were as follows 1. The mean shear bond strength of the specimens of which the ceramic surface was treated with the combination of hydrofluoric acid and silane before bonding composite resin was significantly higher than those of the other surface treatment groups(p<0.05). 2. In the case of All-Bond 2 and Scotchbond Multi-purpose bonding agent group, the surface treatment methods did not influenced significantly on the shear bond(p>0.05). 3. Of the four bonding agents tested, the shear bond strength of Heliobond was significantly lower than those of other bonding agents regardless of the surface treatment methods(p<0.05). 4. The highest shear bond strength($12.55{\pm}1.92$ MPa) was obtained with Scotchbond Multipurpose preceded by the ceramic surface treatment with the combination of 4% hydrofluoric acid and silane.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2685-2688
• /
• 2010

• Journal of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.676-679
• /
• 1990

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.1091-1094
• /
• 2011

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1743-1746
• /
• 2010