• Journal of the Korean earth science society
• /
• v.27 no.5
• /
• pp.548-556
• /
• 2006

The purpose of this study is to clarify the relict landform development of fluvial terrace and the soil characteristics occurring on the fluvial deposits. The physico-chemical properties of soil that are developed on terrace deposits and X-ray diffraction analysis of clay were investigated specifically. The horizon of $A_1$ consists of silt loam with reddish-brown color (5YR4/3). Its soil structures is a weak, fine, subangular, and blocky, breaking to granular. The horizon of $B_{1t}\;and\;B_{2t}$ are silt clay with either a yellowish red (5YR5/6), bright red (2.5YR4/6) color. This soil structure is weak, subangular, and blocky, with thin discontinuous bright red (2.5YR4/6) clay cutans and soft manganese concretions. This red soil structure is made on heavy-textures. It is packed compactly with parent materials of high fluvial surface sediments, and usually has a $A_1-B_{1t}-B_{2t}-C$ profile, from top to bottom. In most cases, clay accumulation in the B-horizon and clay cutans on ped surfaces are observed, which means the argillic horizon has formed. The soils derived from fluvial surface deposits are associated with soils. The soils on the high fluvial surface are considered to be a kind of paleo-red soil which were developed by strong desilicification and rubefaction, and strong leaching of bases under warmer bio-climatic condition during the old Pleistocene period. According to these morphological and anlaytical characteristics,geomorphological features and bio-climatic conditions under which the soil have developed on the high terrace sediment indicate that the soil should be classified as paleo-red soils.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.363-363
• /
• 2008

The development of dry etching process for sapphire wafer with plasma has been key issues for the opto-electric devices. The challenges are increasing control and obtaining low plasma induced-damage because an unwanted scattering of radiation is caused by the spatial disorder of pattern and variation of surface roughness. The plasma-induced damages during plasma etching process can be classified as impurity contamination of residual etch products or bonding disruption in lattice due to charged particle bombardment. Therefor, fine pattern technology with low damaged etching process and high etch rate are urgently needed. Until now, there are a lot of reports on the etching of sapphire wafer with using $Cl_2$/Ar, $BCl_3$/Ar, HBr/Ar and so on [1]. However, the etch behavior of sapphire wafer have investigated with variation of only one parameter while other parameters are fixed. In this study, we investigated the effect of pressure and other parameters on the etch rate and the selectivity. We selected $BCl_3$ as an etch ant because $BCl_3$ plasmas are widely used in etching process of oxide materials. In plasma, the $BCl_3$ molecule can be dissociated into B radical, $B^+$ ion, Cl radical and $Cl^+$ ion. However, the $BCl_3$ molecule can be dissociated into B radical or $B^+$ ion easier than Cl radical or $Cl^+$ ion. First, we evaluated the etch behaviors of sapphire wafer in $BCl_3$/additive gases (Ar, $N_2,Cl_2$) gases. The behavior of etch rate of sapphire substrate was monitored as a function of additive gas ratio to $BCl_3$ based plasma, total flow rate, r.f. power, d.c. bias under different pressures of 5 mTorr, 10 mTorr, 20 mTorr and 30 mTorr. The etch rates of sapphire wafer, $SiO_2$ and PR were measured with using alpha step surface profiler. In order to understand the changes of radicals, volume density of Cl, B radical and BCl molecule were investigated with optical emission spectroscopy (OES). The chemical states of $Al_2O_3$ thin films were studied with energy dispersive X-ray (EDX) and depth profile anlysis of auger electron spectroscopy (AES). The enhancement of sapphire substrate can be explained by the reactive ion etching mechanism with the competition of the formation of volatile $AlCl_3$, $Al_2Cl_6$ or $BOCl_3$ and the sputter effect by energetic ions.

• The Korean Journal of Ecology
• /
• v.24 no.2
• /
• pp.101-109
• /
• 2001

We created an environmental forest on the basis of ecological design around the incineration plant of Jindo Engineering and Construction Co., Ltd., which is located in Jeongwang-dong, Siheung-si, Kyunggi-do. To get ecological information of this site, physico-chemical properties of soil on salt marsh, which is located close to the syudy site and of forest soil transported from other sites for ecological restoration were analyzed. Texture of salt marsh and transported soils were loam and sandy loam, respectively. pH, organic matter, T-N, available P, and exchangeable K and Na contents of salt marsh and transported forest soils were 6.7 and 5.4, 4.1 and 0.4%, 1.0 and 0.3mg/g, 46.7 and 6.8ppm, 521 and 207ppm, and 3.8 and 0.5mg/g, respectively. Introduced plants were selected among the dominant species of forests and the species composing the potential natural vegetation around the present study site. Those plants were selected again by considering the tolerances to air pollution and to salt, and their availability. Selected trees were Pinus thunbergii, Sophora japonica, Celtis sinensis, Quercus aliena, Q. serrata, Q. dentata, and Q. acutissima. Selected sub-trees were Albizzia julibrissin, Koelreuteria poniculata, and Styrax japonica and shrubs were Rhododendron yedoense var. poukhanense, R. mucronulatum, Callicarpa japonica, Euonymus alatus, E. japonica, and R. schlippenbachii. On the other hand, introduction of herbs was not considered except for Liriope platyphylla, which was ornamentally planted in one site. Planting bed of mound type was adopted to provide the fine drainage system. Mound was designed to furnish litter, A, B, and C layers simuating the profile of forest soil. Slope of mound was mulched by rice straw of 2cm in thickness to prevent for sliding of litter and soil in cases of strong wind or heavy rain. Height of mound was designed to secure more than 1 m by combining A and B layers. Narrow zones, in which mound with stable slope degree cannot be prepared, was designed to equip the standard soil depth with the introduction of stone for supporting. On the other hand, plants with shallow root system were arranged in some zones, in which satisfactory soil depth cannot be ensured. Plants were arranged in the order of tree, sub-tree, and shrub from center to edge on the mound to make a mature forest of a dome shape in the future. Dispersion of plants was designed to be random pattern rather than clumped one. Problems on creation of the environmental forest by such ecological design were found to be management or inspection by non-specialized project operators and inspecting officers, and regulations for construction without ecological background. Alternative plans to solve such problems were suggested.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.3
• /
• pp.633-642
• /
• 2003

A pain is the symptom which defends against noxious stimulus about a human body, it is known that if the periphery of perceptive nerve were stimulated by a physical or chemical factors, the stimulation is induced by transmission to pain center in the cerebral cortex according to pain conduction tract. The treatment of pain is to decrease a stimulus that causes a pain or block off a nerve transmitting a stimulus or puts on a way to calm down pain center, but It is for adjustment of a pain to be the most representative in acupuncture among various ways to cure a pain in Oriental medicine. However, the analgesic effect of an individual response to acupuncture stimulation shows marked individual variations, so these days genetic a few approach is attempted. On this the author determined that the responding group was appointed those whose tail flick latency (TFL) responding time delayed the minimum of 30 % comparing with basal reaction time. For those whose TFL time had shorter than 30 % was grouped as a non-responding group. And then the hypothalamus of each group was dissected and RNA was further purified. After synthesizing cDNA using oligo dT primer, products were finally applied to the PCR. The results were as follows; The ratio of responding group to non-responding group was 6:4. Ach T (acetylcholinesterase T subunit), BF-I (Brain factor-I), DBH (Dopamine β-hydroxylase) and PNM (Phosphotidylethanolamine N-Methyltransferase) were revealed significantly in the responding group. Cathepsin B and Tau were revealed significantly in the non-responding group. The PCR results show that Ach T, BF-I, DBH and PNM are expressed abundantly in the responding group, where as cathepsin B and tau are abundant in the non-responding group. These results suggest that the analgesic effect on acupuncture stimulation is related to regulation of neurotransmitter as well as neurodegeration of cerebrum.

• Journal of Life Science
• /
• v.20 no.9
• /
• pp.1415-1419
• /
• 2010

Consumption of green tea has increased along with increasing concern regarding healthier lifestyles, and many brands of green tea are sold with a label indicating the region of Korea in which the tea was produced. However, there is little information on identifying the difference between the green tea cultivars according to the region they were grown. Here, 9 green tea cultivars collected from Hadong region, Bosung region, China and Japan were subjected to the STS-RFLP analysis. Using the coding and noncoding DNA regions of genes related to the phenylpropanoid pathway, such as phenylalanine ammonia-lyase, chalcone synthase and dihydroflavonol 4-reductase, we have identified the differences between green tea cultivars according to the region they were grown in. In this study, we showed a STS-RFLP method of green tea analysis which easily distinguished different kinds of tea using the primers as described. In addition, we identified that the green tea cultivars from Hadong and Bosung displayed a different profile when PAL intron was digested with Dde I, suggesting that a rapid authentication system for green tea cultivars grown in different regions in Korea is available.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.1
• /
• pp.37-42
• /
• 2016

To develop an elderly diet food that can easily be chewed and swallowed, we manufactured elderly diet food using chicken breast meat with various amounts (0.9, 1.1, 1.3 and 1.5 g) of gelatin used as a viscosity agent, and evaluated their physico-chemical and sensory properties. As the amount of gelatin decreased, the lightness were increased, but the redness and yellowness were decreased. In the texture profile analysis, hardness, springiness, gumminess and chewiness were significantly increased with increased amounts of gelatin, but adhesiveness gradually decreased. Cohesiveness was no significantly difference. Free amino acid contents in elderly diet food using chicken breast meat did not show trend to increase or decrease, but the tyrosine contents were significantly decreased with increased amounts of gelatin. The sensory evaluations including taste, flavor and color were not significantly different. However, the texture and overall acceptance of elderly diet food using chicken meat containing 1.3 g of gelatin had the highest acceptance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.2
• /
• pp.59-64
• /
• 2006

To analyze the changes of soil physico-chemical properties after reclamation, we carried out an experiment for 75 samples of representative saline soils in South Korea. The more the years after reclamation is proceeded, the blighter the soil color is, soil horizon differentiation and structure is developed, but electrical conductivity(EC) decreased. After the soil survey, coarse textured soils were more quickly de-salined than the fine textured soils. In case of fine loamy textured Poseung series, it could be estimated that the series had Salic horizons in sub-order level of taxonomical classification. In other case of coarse loamy textured soil series, it could be estimated that the series had Sodic properties in sub-group level. Sodium contents of fine loamy textured soils were not decreased after reclamation, but those of coarse loamy textured Gwanghwal series reclaimed about 76 years ago were reclassified because of desalinization. To be desalined low to 4 dSm-1 of EC, it presumably takes about 108, or 12 years for fine loamy and coarse loamy textured soils, respectively.

• Korean journal of food and cookery science
• /
• v.29 no.6
• /
• pp.725-731
• /
• 2013

This study investigates the quality of strawberry jam containing different quantities of strawberry. Strawberry jam was prepared by the addition of 70-30%(w/w) strawberry puree, Sweetness, pH, total acidity, color, anthocyanin and pectin content, texture, free sugar, and organic acid content of the samples were measured. Decrease in the quantity of the strawberry puree led to a decrease in the following: total acidity(significance value p<0.05), anthocyanin, pectin, total free sugar, frutose, glucose, sucrose, and, organic acid content, namely oxalic acid, citric acid, malic acid, succinic acid, and formic acid. A texture profile analysis showed reduction in the hardness, gumminess, and chewiness of the jam. At the same time, decrease in the puree quantity also led to an increase in the sweetness, pH, L-value, a-value and b-value(significance value p<0.05) of the jam. These results promote, the consumption of fruit that are high in fruit, low in sugar, and do not contain any chemical additives.

• Journal of Technologic Dentistry
• /
• v.22 no.1
• /
• pp.89-112
• /
• 2000

Although dental laboratory technicians are prone to be exposed to various work-related health hazardous materials such as dusts, chemicals, etc., the prevalence and nature of work-related health problems of them have not been a matter of great concern in the field of occupational health service in Korea. The purpose of the present investigation was to describe a collected profile of subjective health symptoms and their attributable factors in Korean dental laboratory technicians. A questionnaire listing five groups of health symptoms and five health symptom-related factors was mailed to randomly selected 1,900 dental laboratory technicians. Among them, 1,344 dental laboratory technicians filled out the questionnaires and returnde them. Five groups of health symptoms included musculoskeletal symptom, dermal symptoms, respiratory symptoms, eys symptoms, and ear symptoms. Five health symptom-related factors were occupational environment-related health risk factors, work history, health related habits and status, use of personal protective equipment and general characteristics. Detailed parameters of health risk factors were work posture, vibration, and chemical or physical hazards such as dust, fume, vapor, solvent, light, and noise for occupational environment-related factors; work place, area, number of employees, work hours, career, work part, and work load for work history; Broca's index, hours of sleep, eating, smoking, alcohol, exercise, health examination, and self assessed health status for health habits and status; face masks, goggles, and so on for use of personal protective equipment, and; age, sex, marital status, and education for general characteristics. Before the start of main survey, a pilot survey was carried out for validity and reliability tests of the questionnaire. All the data obtained were coded and analyzed with PC/SAS 6.12 program. The prevalence of health symptoms was the highest in musculoskelton (87.3%), and followde by eyes (78.9%), respiratory organs (64.3%), ears (57.8%), and skin (52.2%) in descending order. Statistically significant risk factors by multiple logistic regression analyses were sex, health examination, self assessed health status, and hand/finger posture in musculoskeletal symptoms; sex, self assessed health status, career, acid gas, and hand contact with resin mixture in deraml symptoms; Broka's smoking, exercise, self assessed health status, and face mask in respiratory symptoms; sex, hours of sleep, self assessed health status, work hours, work load, plaster dust, inadequate lighting, and goggle in eys symptoms, and eating, smoking, self assessed health status, and work load in ear symptoms. With the above considerations in mind, prevalence of subjective symptoms among Korean dental laboratory technicians was relatively high, and they were attributable to most of the occupational environment-related factors, work history, use of personal protective equipment, health habits and status, and general characteristics. Particularly, it is suggested that health promotion programs for promoting self- assessed health status and smoking cessation, preventive measures for protection of the female technicians’health, and reducing work load be necessary, since those factors were associated with more than one subjective symptom.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.150.1-150.1
• /
• 2014

Showerhead is used as a main part in the semiconductor equipment. The face plate flatness should remain constant and the cleaning performance must be gained to keep the uniformity level of etching or deposition in chemical vapor deposition process. High operating temperature or long period of thermal loading could lead the showerhead to be deformed thermally. In some case, the thermal deformation appears very sensitive to showerhead performance. This paper describes the methods for robust design using computational fluid dynamics. To reveal the influence of the post distribution on flow pattern in the showerhead cavity, numerical simulation was performed for several post distributions. The flow structure appears similar to an impinging flow near a centered baffle in showerhead cavity. We took the structure as an index to estimate diffusion path. A robust design to reduce the thermal deformation of showerhead can be achieved using post number increase without ill effect on flow. To prevent the showerhead deformation by heat loading, its face plate thickness was determined additionally using numerical simulation. The face plate has thousands of impinging holes. The design key is to keep pressure drop distribution on the showerhead face plate with the holes. This study reads the methodology to apply to a showerhead hole design. A Hagen-Poiseuille equation gives the pressure drop in a fluid flowing through such hole. The assumptions of the equation are the fluid is viscous-incompressible and the flow is laminar fully developed in a through hole. An equation can be expressed with radius R and length L related to the volume flow rate Q from the Hagen-Poiseuille equation, $Q={\pi}R4{\Delta}p/8{\mu}L$, where ${\mu}$ is the viscosity and ${\Delta}p$ is the pressure drop. In present case, each hole has steps at both the inlet and the outlet, and the fluid appears compressible. So we simplify the equation as $Q=C(R,L){\Delta}p$. A series of performance curves for a through hole with geometric parameters were obtained using two-dimensional numerical simulation. We obtained a relation between the hole diameter and hole length from the test cases to determine hole diameter at fixed hole length. A numerical simulation has been performed as a tool for enhancing showerhead robust design from flow structure. Geometric parameters for the design were post distribution and face plate thickness. The reinforced showerhead has been installed and its effective deposition profile is being shown in factory.