• Journal of the Korean Wood Science and Technology
• /
• v.22 no.3
• /
• pp.45-50
• /
• 1994

This experiment was to investigate the effects of UV radiation and chemical treatments on the color difference in antioxidant (Tris(2,4-di-t-butyl phenoxy) phosphite)-containing polyurethane coats. The results obtained were summerized as follows: 1. The color difference increased as the exposure time of UV radiation increases, but decreased as addition level of antioxidant increaes. 2. After 400 hours exposure to UV radiation, the color difference respectively showed 6.13 and 5.94 at 0.7 % and 1.0 % addition level but appeared more severe below 0.7 % addition level. Thus, antioxidant prevented discoloration effectively. 3. The color difference of films by chemical treatments increased after 8 hours. Color difference of films treated with 5 % acetic acid($CH_3COOH$), 30 % ethyl alchol ($CH_3CH_2OH$) showed 7.31 and 7.30 respectively. 1 % sodium hydroxide treatment showed 1.86 color difference after 8 hours.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3367-3371
• /
• 2013

MgO nanorods were fabricated by the thermal evaporation of $Mg_3N_2$. The influence of ZnO sheathing and hydrogen plasma exposure on the photoluminescence (PL) of the MgO nanorods was studied. PL measurements of the ZnO-sheathed MgO nanorods showed two main emission bands: the near band edge emission band centered at ~380 nm and the deep level emission band centered at ~590 nm both of which are characteristic of ZnO. The near band edge emission from the ZnO-sheathed MgO nanorods was enhanced with increasing the ZnO shell layer thickness. The near band edge emission from the ZnO-sheathed MgO nanorods appeared to be enhanced further by hydrogen plasma irradiation. The underlying mechanisms for the enhancement of the NBE emission from the MgO nanorods by ZnO sheathing and hydrogen plasma exposure are discussed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.333-336
• /
• 2004

In this study focuses on bond properties of hybrid FRP rebar after chemical environmental exposure. Hybrid FRP rebar bond specimens were subjected to four type of exposure conditions. Bond properties were investigated by direct bond test. Bond test results, hybrid FRP rebars were found to have better bond strength with concrete than currently using GFRP rebar. Also, hybrid FRP rebar had more than about $80\%$ in bond strength of steel rebar.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.1
• /
• pp.45-50
• /
• 1998

Most organophosphorus pesticides may be metabolized to yield some common phosphates in human or in animals, and these metabolites may be used as the exposure biomarkers to pesticides. In this study, we developed the extraction method of four phosphate metabolites from the spiked human urine in high recovery by the solid phase extraction with a reverse-phase cartridge (cyclohexyl silica) followed by the elution with methanol. The extracted urinary metabolites were derivatized with hexamethyldisilazane/trimethyl-chlorosilane/pyridine (2 : 1 : 10, v/v/v) and identified by gas chromatography/mass spectrometry. Calibration curve obtained from each metabolite standard using by GC/MS/SIM has shown good linearity and detection limits of metabolites were the range of 0.05-0.1 ㎍/㎖ in urine. Phenthoate, one of the organophosphorus pesticides, was orally administrated to rats. Four metabolites were detected in the rat urine. The results of this study may be applied to development of exposure biomarkers for monitoring of environmental pollutants.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.1
• /
• pp.16-25
• /
• 2013

The Korean groundwater law regulates 20 groundwater contamination parameters, including 14 specific harmful substances. Expanding the number of groundwater quality standards are needed to cope with recent groundwater quality deterioration due to the use of various chemicals. Chemical ranking and scoring system (CRS) is a scientific tool to sort priority chemicals by considering exposure and toxicity potentials. In this study, we developed a CRS for scoring and ranking of possible groundwater pollutants and screened priority substances to be later considered in the Korean standard expansion. Chemical Ranking Of groundWater pollutaNts (CROWN) incorporates important parameters consisting of exposure potential, human and water ecotoxicity, interests, and certainty. Furthermore, CROWN additionally evaluated existence of other media standards to consider impacts by contamination of other media. The 197 substances that were common to 9 countries were selected first. CROWN evaluated and ranked each chemical, and finally suggested priority substances. Suggested priority substances were classified into two groups according to the groundwater use purposes: drinking and non-drinking. The priority substances were further classified into $1^{st}$ and $2^{nd}$ group priorities. The $1^{st}$ group consists of 75 substances, including the all the Korean groundwater standard parameters. CROWN will be used in selecting groundwater pollutants for possible inclusion in the Korean standard expansion.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.06a
• /
• pp.337-340
• /
• 2005

Ethylene oxide is a genotoxic carcinogen with widespread uses as industrial chemical intermediate and gaseous sterilant. 2-hydroxyethylated N-terminal valine in Hb is a good biomarker for biological monitoring of ethylene oxide exposure, because of its stability. We studied the determination method of (N-2-hydroxy-ethyl)valine in hemoglobin adduct by using GC/MS. PFPITC and TBMS were used as appropriate derivatives. Ethylene oxide formed Hb adducts as (N-2-hydroxy-ethyl)valine(HEV) in mouse with ethylene oxide inhalation exposure. Standard HEV can be synthesized with 2-amino-ethanol and 2-bromo-3-methylbutyric acid. GC/MS can measured them after derivatization with pentafluorophenylisothiocianate(PFPITC) and N-(tertiary butyl dimethylsiiyl)-N-methyl-trifluoroacetamide(TBDMS-TFA) by using Edman procedure. Concentrations of Hb adduct were proportionally increased with exposure levels. They were 230${\pm}$35(nmol g$^{-1}$ globin) and 410${\pm}$72(nmol $g^{-1}$ globin) at 200ppm and 400ppm ethylene oxide inhalation exposure, respectively.

• Environmental Analysis Health and Toxicology
• /
• v.29
• /
• pp.15.1-15.7
• /
• 2014

Objectives This paper tried to review a recent research trend for the environmental exposure of engineered nanomaterials (ENMs) and its removal efficiency in the nanowaste treatment plants. Methods The studies on the predicted environmental concentrations (PEC) of ENMs obtained by exposure modeling and treatment (or removal) efficiency in nanowaste treatment facilities, such as wastewater treatment plant (WTP) and waste incineration plant (WIP) were investigated. The studies on the landfill of nanowastes also were investigated. Results The Swiss Federal Laboratories for Materials Science and Technology group has led the way in developing methods for estimating ENM production and emissions. The PEC values are available for surface water, wastewater treatment plant effluents, biosolids, sediments, soils, and air. Based on the PEC modeling, the major routes for the environmental exposure of the ENMs were found as WTP effluents/sludge. The ENMs entered in the WTP were 90-99% removed and accumulated in the activated sludge and sludge cake. Additionally, the waste ash released from the WIP contain ENMs. Ultimately, landfills are the likely final destination of the disposed sludge or discarded ENMs products. Conclusions Although the removal efficiency of the ENMs using nanowaste treatment facilities is acceptable, the ENMs were accumulated on the sludge and then finally moved to the landfill. Therefore, the monitoring for the ENMs in the environment where the WTP effluent is discharged or biomass disposed is required to increase our knowledge on the fate and transport of the ENMs and to prevent the unintentional exposure (release) in the environment.

• Safety and Health at Work
• /
• v.2 no.2
• /
• pp.97-104
• /
• 2011

N,N-Dimethylformamide (DMF) is globally used as an organic solvent in the production of synthetic leather and resins because of its low volatility, making it an attractive industrial material. Despite its excellent property as a chemical solvent, utilization of DMF is somewhat controversial nowadays due to its hazardous effects on exposed workers in work places. Many toxification cases are being reported globally and the number of cases of liver damage is still increasing in developing countries. On account of this, a series of epidemiologic surveys are being conducted to understand the degrees of liver damage caused by DMF exposure. Furthermore, many investigations have been performed to clarify the mechanism of DMF-induced liver toxicity using both human and experimental animal models. This review summarizes the current occupational cases reported on liver damage from workers exposed to DMF in industrial work places and the research results that account for DMF-induced liver failure and possible carcinogenesis. The findings reviewed here show the synergistic toxicity of DMF exposure with other toxicants, which might occur through complicated but distinct mechanisms, which may extend our knowledge for establishing risk assessments of DMF exposure in industrial work places.

• KOREAN ASSOCIATION OF OCCUPATIONAL HEALTH NURSES
• /
• v.19 no.2
• /
• pp.81-83
• /
• 2012

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 1999.05a
• /
• pp.73-73
• /
• 1999