• Korean Chemical Engineering Research
• /
• 제50권4호
• /
• pp.627-631
• /
• 2012

휴대용 고분자전해질 연료전지의 수소발생용으로써 $NaBH_4$는 많은 장점을 갖고 있다. 본 연구에서는 $NaBH_4$ 가수분해 반응용 Co-P-B/Cu 촉매의 내구성에 대해 연구하였다. Co-P-B/Cu 촉매의 내구성 미치는 반응 온도, $NaBH_4$ 농도, NaOH 농도, 촉매 소성온도 등의 영향에 대해 실험하였다. 촉매의 내구성은 가수분해 반응 중에 발생하는 gel 형성에 영향을 받았다. 즉 gel 형성에 의해 촉매 손실률이 증가하였다. $NaBH_4$ 농도가 고농도일 때는 $60^{\circ}C$ 이상에서는 gel 형성이 안 되어 촉매 손실률이 낮았다. 그러나 $40^{\circ}C$ 이하에서는 gel이 형성되어 촉매 손실률이 증가했다. $NaBH_4$ 20 wt%, $40^{\circ}C$에서 NaOH 농도증가에 따라 겔이 형성되어 촉매 손실률이 증가함을 보였다. Co-P-B/Cu 촉매의 높은 온도에서 소성은 내구성을 향상시켰지만 촉매 활성을 감소시켰다.

• Korean Chemical Engineering Research
• /
• 제59권1호
• /
• pp.49-53
• /
• 2021

고분자 연료전지(PEMFC) 고분자막의 화학적 내구성을 평가하는데 Fenton 반응이 자주 사용된다. 그러나 과산화수소와 철 이온의 격렬한 반응 때문에 재현성이 낮아 실험 데이터를 비교하기가 어려운 문제점이 있다. 본 연구에서는 Fenton 반응에 의한 고분자막 내구성 실험의 재현성을 향상시키기 위한 반응조건을 찾고자 하였다. 과산화수소 농도는 30%로 고정시키고 철이온 농도와 온도, 교반속도, 시료크기를 변화시키며 라디칼에 열화된 Nafion 고분자막의 불소이온 농도를 측정했다. 철이온 농도를 높게하거나 고분자막 시료 크기를 크게하고, Fenton 반응 온도를 80 ℃로 높게하면 실험편차가 커져서 철이온 농도 10 ppm, 온도 70 ℃와 시료크기 0.5 ㎠가 적합하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 토목섬유 학술발표회 논문집
• /
• pp.21-38
• /
• 1999

Engineering properties of most polymers used in geosynthetics such as geogrid can be degraded by the chemical reaction (e.g., oxidization, ultraviolet rays, hydrolysis etc.), chemical and mechanical load, microorganism, and so on. In addition, polymer can be damaged by the compaction during construction, and the characteristic of tensile strength of polymer can be changed by the long-term creep effect. In this study, engineering properties of flexible geogrids which are manufactured by weaving/knitting the high-tenacity polymers such as polyester formed in a very open, grid-like configuration, coated with any one of a number of materials (e.g., PVC, latex, etc.), are investigated. Through the analysis of test results, the durability and the long-term design tensile strength of flexible geogrids are evaluated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.196-199
• /
• 2004

Metakaolin is a cementitious material for producing high-strength concrete. This material is now used as substitute for silica-fume. In this paper, we tested the compressive strength of concrete according to the substitute ratio of metakaolin, silica-fume. And we did the durability test such as chloride ion diffusion and chemical attack. In the compressive strength test, the result shows that $10\%$ substitute of metakaolin & silica-fume for binder is optimum. In the chloride ion diffusion test, according to the increase of substitute of metakaolin & silica-fume for binder, the diffusion coefficient is more reduced. And in the chemical attack test, according to the increase of substitute, the resistance is more excellent. In the durability test, we recognized that metakaolin is able to used as a substitute for silica-fume.

• Corrosion Science and Technology
• /
• 제15권1호
• /
• pp.28-37
• /
• 2016

Due to the increased construction of offshore concrete structures and the use of de-icing salts for the purpose of snow removal, the needs for the development of anti-corrosive concrete are increasing. To solve these problems, an evaluation of the mechanical and durability properties for concrete were conducted by mixing modified-sulfur as 0 %, 5 %, 10 %, 15 % cement weight ratio. Both strengths and the properties affecting durability such as water absorption coefficient, chloride ion permeability, accelerated carbonation resistance, rapid freezing and thawing, and chemical resistance were evaluated. All evaluations performed were according to the test specifications associated KS. The results indicate that mixing of modified-sulfur lowed chloride ion permeability and improved chemical resistance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.217-220
• /
• 2004

Metakaolin is a cementitious material for producing high-strength concrete. This material is now used as substitute for silica-fume. In this paper, we did the durability test such as chloride ion diffusion, chemical attack. repeated freezing and thawing, carbonation. In the chloride ion diffusion test, according to the increase of substitute of metakaolin & silica-fume for binder, the diffusion coefficient is more reduced. And in the chemical attack test, according to the increase of substitute, the resistance is more excellent. In the other durability test, the concrete using metakaolin is also compared with those of the portland cement concrete and silica fume concrete. According to these tests, we recognized that metakaolin is able to be used as a substitute for silica-fume.

• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.100-105
• /
• 2007

Electro-rheological(ER) fluid and valve are fabricated and evaluated experimentally in its durability to utilize the hydraulic control systems for long term operation. The two-ports ER valve used in the experiment consist of twelve parallel multi-layer electrodes and provide a restriction to the passage of ER fluid because of the viscous pressure drop and a component induced by the electric field. The durability test of ER valve are performed by measuring the surface roughness of electrodes with variation of an electric field strength and test time(1000 or 1800min.). Also, the shear stress and shear rate are measured to evaluate the durability of ER fluid as function of time. After durability test, ER shear stress increases approximately proportional to the shear rate with applied electric field intensity, In the ER valve, the center line average height roughness(Ra) of copper electrode increases about 1.56 times and ten-point median height roughness(Rz) increases about 2.2 times after the durability test. An understanding of these durability is essential to predicting the service life of ER fluid and valves.

• Computers and Concrete
• /
• 제8권5호
• /
• pp.511-524
• /
• 2011

Although concrete is believed to be a durable material, concrete structures have been degraded by severe environmental conditions such as the effects of chloride and chemical, abrasion, and other deterioration processes. Therefore, durability evaluation has been required to ensure the long term serviceability of structures located in chloride exposed environments. Recently, probability-based durability analysis and design have proven to be reliable for the service-life predictions of concrete structures. This approach has been successfully applied to durability estimation and design of concrete structures. However, currently it is difficult to find an appropriate method engineers can use to solve these probability-based diffusion problems. In this paper, computer software has been developed to facilitate probability-based durability analysis and design. This software predict the chloride diffusion using the Monte Carlo simulation method based on Fick's second law, and provides durability analysis and design solutions. A graphic user interface (GUI) is adapted for intuitive and easy use. The developed software is very useful not only for prediction of the service life but for the durability design of the concrete structures exposed to chloride environments.

• 한국산업융합학회 논문집
• /
• 제25권6_3호
• /
• pp.1239-1246
• /
• 2022

This paper introduces the effect of grease on the degradation characteristics of bearings used as key components of packaging equipment and automation systems. Bearings parts are installed to fix and support the rotating body of the system, and performance degradation of the bearings has a great effect on the life of the system too. When bearings are used in various devices and systems, the grease is applied to reduce friction and improve fatigue life. Determining the type of lubricant (grease) is important because it has a great influence on the operating environment and lifespan and ensures long lifespan of systems and facilities. However, studies that simultaneously compared and analyzed the change in mechanical degradation characteristics and the comparison of chemical degradation characteristics according to grease types under actual operating conditions are insufficient. In this paper, three types of small harmonic drive, high-load reducer, and low-load reducer grease used in power transmission joint modules are experimentally selected and finally injected into ball bearings with a load (19,500N) to improve bearing durability. Degradation characteristics were tested by attaching to test equipment. At this time, after the durability test under the same load conditions, the mechanical degradation characteristics, that is temperature, vibration according to the three greases types. In addition, the chemical degradation characteristics of the corresponding grease was compared to present the results of mutual correlation analysis.

• 한국응용과학기술학회지
• /
• 제17권4호
• /
• pp.267-272
• /
• 2000

Dual-actions are the most recently used delivery system in drug study. Dual-action agents are unique chemical entities comprised of two different type of antibacterial compounds covalently linked together in a single molecule in such a way that both components are able to exert their bactericidal properties. Crosslinked sulfadiazine-sulfanilamide such as antibiotics is synthesized by synthetic handle with glutaraldehyde. As a result, New synthetic antibacterial agent exhibited the broad antibacterial activities against gram(+) and gram(-) of 4 strains and a long durability supposing that the stomach and blood.