• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2418-2422
• /
• 2011

The enantiomeric separation of lactic acid for its absolute configuration has become important task for understanding its biological origin and metabolic process involved in the formation of lactic acid. It involves the conversion of enantiomers as diastereomeric O-pentafluoropropionylated (S)-(+)-3-methyl-2-butyl ester and the direct separation by gas chromatography-mass spectrometry on a achiral capillary column. The (R)- and (S)-lactic acids were completely separated with a high resolution of 1.9. The newly developed method showed good linearity (r ${\geq}$ 0.999), precision (% relative standard deviation = 3.4-6.2), and accuracy (% relative error = -7.7-1.4) with the detection limit of 0.011 ${\mu}g/mL$. When the method was applied to determine the absolute configuration of lactic acid in Lactobacillus delbrueckii subsp. lactis 304 (LAB 304), the composition (%) of (R)-lactic acid in the cell pellet and in the culture medium were $89.0{\pm}0.1$ and $78.2{\pm}0.4$, respectively. Thus, it was verified that the present method is useful for the identification and composition test of lactic enantiomers in microorganisms.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.3
• /
• pp.229-233
• /
• 2003

Boron-Carbon-Nitrogen (B-C-N) system is an attractive ternary material since it has not only an extremely high hardness but also a number of other prominent characteristics such as chemical inertness, elevated melting point, and low thermal expansion. In this paper, the corrosion behavior of B-C-N thin films in aqueous solution was investigated B-C-N films with different composition were deposited on a platinum plate by magnetron sputtering in the thickness range of 150-280 nm. In order to understand effect of pH of solutions, $BC_{2.\;4}N$ samples were immerged in 1M HCl, 1M NaCl, and 1M NaOH solution at 298k, respectively. BCN samples with different carbon contents were exposed to 1M NaOH solutions to investigate effect of chemical composition on corrosion resistance. Corrosion rates of samples were measured by ellipsometry, From results, optical constant of $BC_{2,\;4}N$ films was found to be $N_2=2.110-0.295i$. The corrosion rates of $Bi_{1.\;0}C_{2.\;4}N_{1.\;0}$ films were NaOH>NaCl>HCl in orders. With increasing carbon content in B-C-N films, the corrosion resistance of B-C-N films was enhanced. The lowest corrosion rate was obtained for $B_{1.\;0}C_{4.\;4}N_{1.\;9}$ film.

• CELLMED
• /
• v.6 no.2
• /
• pp.11.1-11.7
• /
• 2016

The aimed of the presence study was to determine the antiulcer potential of virgin coconut oil (VCO), either extracted by wet process (VCO_A) or fermentation process (VCO_B), and to compare their effectiveness against the copra oil (CO) using the HCl/ethanol-induced gastric ulcer model. Earlier, the oils underwent chemical analysis to determine the free fatty acids composition, physicochemical properties and anti-oxidant capability. In the antiulcer study, rats (n=6) were pre-treated orally for 7 consecutive days with distilled water (vehicle), 100 mg/kg ranitidine (positive group) or the respective oils (10, 50, and 100% concentration). One hour after the last test solutions administration on Day 7^th, the animals were subjected to the gastric ulcer assay. Macroscopic and microscopic analyses were performed on the collected rat's stomachs. From the results obtained, the chemical analysis revealed i) the presence of high content of lauric acid followed by myristic acid and palmitic acid in all oils and; ii) the significant (^*p< 0.05) different in anisidine- and peroxide-value, percentage of free fatty acid, total phenolic content and total antioxidant activity among the oils. The animal study demonstrated that all oil possess significant (^*p< 0.05) antiulcer activity with VCO_B being the most effective oil followed by VCO_A and CO. The macroscopic observations were supported by the microscopic findings. Interestingly, all oils were more effective than 100 mg/kg ranitidine (reference drug). In conclusion, coconut oils exert remarkable antiulcer activity depending on their methods of extraction, possibly via the modulation of its antioxidant and anti-inflammatory activity.

• Restorative Dentistry and Endodontics
• /
• v.41 no.4
• /
• pp.255-261
• /
• 2016

Objectives: This study aimed to analyze the mineral composition of naturally- and artificially-produced caries-affected root dentin and to determine the elemental incorporation of resin-modified glass ionomer (RMGI) into the demineralized dentin. Materials and Methods: Box-formed cavities were prepared on buccal and lingual root surfaces of sound human premolars (n = 15). One cavity was exposed to a microbial caries model using a strain of Streptococcus mutans. The other cavity was subjected to a chemical model under pH cycling. Premolars and molars with root surface caries were used as a natural caries model (n = 15). Outer caries lesion was removed using a carbide bur and a hand excavator under a dyeing technique and restored with RMGI (FujiII LC, GC Corp.). The weight percentages of calcium (Ca), phosphate (P), and strontium (Sr) and the widths of demineralized dentin were determined by electron probe microanalysis and compared among the groups using ANOVA and Tukey test (p < 0.05). Results: There was a pattern of demineralization in all models, as visualized with scanning electron microscopy. Artificial models induced greater losses of Ca and P and larger widths of demineralized dentin than did a natural caries model (p < 0.05). Sr was diffused into the demineralized dentin layer from RMGI. Conclusions: Both microbial and chemical caries models produced similar patterns of mineral composition on the caries-affected dentin. However, the artificial lesions had a relatively larger extent of demineralization than did the natural lesions. RMGI was incorporated into the superficial layer of the caries-affected dentin.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.439-445
• /
• 2016

Recently, a large number of researches about concrete containing high volume fly-ash(HVFA) have been carried to obtain carbon dioxide reduction, resource recycle and durable option in concrete industry. The quality of fly-ash such as chemical composition and fineness has high variability due to the differences of used fuels, operation condition in power plant. The aim of this study is to investigate the performances of fly-ash cement mortar containing different type of fly-ashes. The basic analysis of fly ash such as chemical composition, SEM image analysis were performed. Many mortar specimens were fabricated to evaluate the properties (compressive strength, drying shrinkage and carbonation) of mortar with various fly ash. From the test results, the quality of each fly ash must be considered and fully weighted in fly ash concrete.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6403-6410
• /
• 2015

Medical polymer PLGA is biocompatible, biodegradation, mechanical characteristic and biostability, and the degradation time can be adjust by controlling the number of monomer. In this paper, PLGA membranes have different composition ratio by L/D type was prepared by phase transition method. And the PLGA membrane in phosphate buffered saline(PBS) at the different test temperatures for different periods of time to examined for change in mass and measured the pH of degradation media. Measurement of Tg and surface structure was performed using a DSC and Stereoscopic microscope. As the molecular weighter increase, hydrolysis rate was decrease in geometrical progression. According to the composition ratio by L/D type, degradation rate and the change of pH are large.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.2
• /
• pp.110-114
• /
• 1990

Although corn is regarded as the most feasible forage corp, its relatively low content of protein is the critical we a kness for animal feeding. Many researches have been carried out to improve protein level in corn forage, however, there are no indicatable results but corn-legume intercropping. Plot test and proximate analysis were fullfill to compare dry matter yield and available nutrients of silage corn mono-culture system with those of corn-legume intercropping system of forage plant and silage. The MO culture system were observed by two stage of maturity, milk stage (Aug. 3), yellow stage (Aug. 24), and obtained following results. 1. Dry matter yields per 10 a at milk stage in corn mono-culture system was 596.2kg and corn-legume intercropping systems were 609.0 kg (corn-cowpea), 591.0 kg (corn-soybean) and 563.1 kg (corn-frenchbean), respectively. And comparable to them, 1508.9 kg (corn mono.), 1482.8 kg (corn-cowpea), 1482.6 kg (cornsoybean), 1379.1 kg (corn-frenchbean) were harvested at yellow stage. 2. The general trends of chemical composition by stages of maturity in corn mono-culture systems were higher than that of corn-legume intercropping system. 3. Crude protein content in corn-legume silages were significantly higher than corn mono-culture at yellow stage, except corn-frenchbean intercropping system. 4. Crude fiber content in corn-legume silage was higher than corn mono-culture silage harvested at yellow stage. 5. Consequently, corn-legume intercropping improved nutritional quality of silage than that of corn-monocultivated silage.

• Journal of Adhesion and Interface
• /
• v.24 no.2
• /
• pp.69-75
• /
• 2023

Recently, the application of paint protection films (PPFs) for automobiles having a self-recovery coating layer has been grown up. In this study, we report the evaluation results on the basic physical properties of a poly(vinyl chloride)- based PPF containing poly(urea-urethane) hybrid self-recovery coating layer. Depending on the main chemical composition and the thickness of poly(urea-urethane)-based coating layer for PPF, the self-recovery performance by an optical microscope and the stain resistance through color difference value are measured. To improve the surface properties and show its easy-cleaning effect against the polluted things, silicone-modified polyacrylate is introduced to the self-recovery coating composition. The contact angle of water on the coated surface is confirmed to show its hydrophobic surface. Finally, accelerated weathering test of paint protection film with poly(urea-urethane) hybrid coating layer is performed to check the possibility of discoloration and deformation due to long-term exposure on harsh condition.

• Membrane Journal
• /
• v.24 no.3
• /
• pp.231-239
• /
• 2014

Polyetherimide (PEI) membranes for separators in Zn air batteries were prepared via phase inversion process from casting solution composed of PEI, n-methylpyrolidone (NMP), and polyvinylpurrolidone (PVP). Furthermore, Zn air batteries were fabricated with the separators. The effects of PEI content and PVP addition in the casting solution on the morphology, mechanical strength, ionic conductivity were investigated through SEM, stress-strain test and ac impedance test. The elelctrochemical performances of the batteries were evaluated through galvanostatic discharge analysis. The mechanical strength of the membrane increased with increasing PEI composition in the casting solution. Little effect of PVP addition into the solution on the mechanical strength of the membrane was investigated. The ionic conductivity value decreased with increasing PEI composition in the solution. With addition of PVP, ionic conductivity of membrane increased until 10 wt% to show the maximum value of 0.1 S/cm. In the higher range of PVP addition over 10%, the ionic conductivity decreased with increasing PVP addition. Ionic conductivity of separator strongly affected the capacity of Zn air battery, and the battery assembled with the separator which showed high ionic conductivity showed high capacity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3260-3268
• /
• 2009

A test apparatus has been fabricated to simulate chemical effect on head loss through a strainer in a pressurized water reactor (PWR) containment water pool after a loss of coolant accident (LOCA). Tests were conducted under condition of same ratio of strainer surface area to water volume between the test appratus and the containment sump. A series of tests have been performed to investigate the effects of spray, existence of calcium-silicate with tri-sodium phosphate (TSP), and composition of materials. The results showed that head loss across the chemical bed with even a small amount of calcium-silicate insulation instantaneously increased as soon as TSP was added to the test solution. Also, the head loss across the test screen is strongly affected by spray duration and is increased rapidly at the early stage, because of high dissolution and precipitation of aluminum and zinc. After passivation of aluminum and zinc by corrosion, the head loss increase is much slowed down and is mainly induced by materials such as calcium, silicon, and magnesium leached from NUKONTM and concrete. Furthermore, it is newly found that the spay buffer agent, tri-sodium phosphate, to form protective coating on the aluminum surface and reduce aluminum leaching is not effective for a large amount of aluminum and a long spray.