• 접착 및 계면
• /
• 제24권1호
• /
• pp.9-16
• /
• 2023

실리콘은 높은 이론적 전기화학 용량을 가짐으로 인해 차세대 리튬이온전지의 음극 소재로서 오랜 기간 연구되어 왔다. 그러나 실리콘의 리튬화/탈리튬화에 동반되는 극심한 부피 변화와 실리콘 본연의 낮은 전자전도성은 실리콘 음극의 실제 적용을 어렵게 하였다. 전도성 고분자 기반의 바인더는 이러한 문제를 동시에 해결할 수 있는 효과적인 수단으로, 바인더 분자 구조 디자인 및 기능성 부여를 통해 실리콘 음극의 성능을 크게 개선할 수 있음이 보고되었다. 본고에서는 실리콘 음극용 전도성 고분자 바인더의 대표적인 연구 성과들을 소개하고, 이를 통해 실리콘 음극의 한계를 극복하기 위한 바인더 디자인 전략에 대해 알아보고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
• /
• pp.197-202
• /
• 1998

The corrosion of steel reinforcements in concrete is of much concern in recent years. The mechanism of corrosion, however, is not clear yet. This study is focused on the corrosion of steel induced by internal chlorides in concrete at early ages. To examine the critical concentration of steel, half-cell potential, chemical composition of expressed pore solutions of mortars and rate of corrosion area were observed with respect to additions of chlorides, types of binders, water-binders ratio.

• 한국추진공학회지
• /
• 제20권5호
• /
• pp.40-50
• /
• 2016

현재 적용되고 있는 에너지화 가소제는 $-NO_2$, $-ONO_2$ 및 $-N_3$와 같은 에너지화 활성 그룹을 포함하고 있어서 충격, 쇼크, 열 등 외부환경에 상당히 민감하여 복합화약의 둔감 안정성을 취약하게 한다. 본 연구에서는 민감한 에너지화 활성 그룹이 아니라 근본적으로는 비활성 그룹으로 복합화약의 민감도에는 영향을 미치지 않지만, 복합화약의 반응 시에 테르밋반응에 의해 추가적인 에너지를 발생할 수 있는 불소계 반응성 가소제를 적용한 폴리우레탄 결합제를 클릭반응으로 합성하고 나노 알루미늄과의 테르밋반응에 대한 열적 특성을 고찰하였다.

• Computers and Concrete
• /
• 제12권4호
• /
• pp.553-563
• /
• 2013

The present study aims to show how the problem of reproducing, as closely as possible, binders of historic mortars by mixing raw materials which are commercially available, can be formulated as a linear optimization problem. The study points out that by mixing five standard raw materials (end-members) it is possible to obtain mortar binders with the almost same chemical compositions of those determined on the historic and archaeological mortar samples studied in some recent scientific papers. An advanced function of the Microsoft Excel spreadsheet, the Solver add-in, was used for the calculation of the right amount of each raw material to be mixed for producing the new binders. This approach could be useful to provide an optimal solution in the process of restoration of ancient monuments, where it is necessary to replace the historic mortars with new highly compatible repair mortars.

• Geomechanics and Engineering
• /
• 제21권4호
• /
• pp.337-348
• /
• 2020

Tropical organic soils having more than 65% of organic matters are named "peat". This soil type is extremely soft, unconsolidated, and possesses low shear strength and stiffness. Different conventional and industrial binders (e.g., lime or Portland cement) are used widely for stabilisation of organic soils. However, due to many factors affecting the behaviour of these soils (e.g., high moisture content, fewer mineral particles, and acidic media), the efficiency of the conventional binders is low and/or cost-intensive. This research investigates the impact of different constituents of cement-sodium silicate grout system on the compressibility behaviour of organic soil, including settlement and void ratio. A microstructure analysis is also carried out on treated organic soil using Scanning Electron Micrographs (SEM), Energy Dispersive X-ray spectrometer (EDX), and X-ray Diffraction (XRD). The results indicate that the settlement and void ratio of treated organic soils decrease gradually with the increase of cement and kaolinite contents, as well as sodium silicate until an optimum value of 2.5% of the wet soil weight. The microstructure analysis also demonstrates that with the increase of cement, kaolinite and sodium silicate, the void ratio and porosity of treated soil particles decrease, leading to an increase in the soil density by the hydration, pozzolanic, and polymerisation processes. This research contributes an extra useful knowledge to the stabilisation of organic soils and upgrading such problematic soils closer to the non-problematic soils for geotechnical applications such as deep mixing.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.1033-1036
• /
• 2011

• 한국고분자학회지:고분자과학과기술
• /
• 제24권6호
• /
• pp.603-611
• /
• 2013

• 펄프종이기술
• /
• 제45권5호
• /
• pp.37-43
• /
• 2013

This study was focused on applying a new paper coating binder, vinyl acetate-ethylene(VAE) emulsion, with SB-latex and acrylic emulsion for paper coating application. VAE emulsion has a low monomer cost and is non-toxic chemical than conventional adhesive for paper coating such as styrene-butadiene latex( SB-latex) and acrylic emulsion. We conducted double coating in order to test VAE emulsion, which was applied on top surface only. The results showed that optical properties of the coated paper with VAE were similar with the SB-latex binders. In case of bonding strength, dry-pick of the coated paper with VAE showed almost same with other binders while wet-pick of the coated paper with VAE had a little bit lower strength than that with SB-latex.

• 전기화학회지
• /
• 제13권3호
• /
• pp.169-174
• /
• 2010

Sulfur cathodes were prepared by ball milling method with different types of electronic conductors and binders in different ball milling time. The sulfur cell with a cathode prepared in 45 min ball milling time gave an initial discharge capacity of 794mAh/g with Super-P as an electronic conductor and poly(vinylidene fluoride) as a binder. The cathode with multi-walled carbon nanotube as an electronic conductor showed an initial discharge capacity of 944 mAh/g and a discharge capacity of 300 mAh/g after 20 cycles. Cathodes with poly(ethylene oxide) and poly(vinylidene fluoride) as binders showed different cycle performance.

• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.726-731
• /
• 2011

F-T 반응이 공업적으로 활용되기 위해서는 촉매의 대량 합성 및 성형체의 기계적 강도가 매우 중요한 변수로 적용될 수 있다. 따라서 본 논문에서는 F-T 합성반응용 촉매로 잘 알려진 Fe 계열 촉매의 성형체 제조를 위한 바인더의 영향을 알아보기 위한 연구를 수행하였다. 촉매 바인더로는 무기바인더와 유기바인더를 사용하여 촉매 성형체를 제조하였다. 무기바인더 및 유기바인더의 종류와 함량에 따른 성형촉매의 물리화학적 특성을 XRD, BET, PSD, TPR, UTM으로 분석하였으며, F-T 합성 반응성에 대한 영향을 관찰함으로써 최적의 성형 촉매 제조 조성을 확립할 수 있었다.