• Korean Journal of Veterinary Research
• /
• v.29 no.3
• /
• pp.263-274
• /
• 1989

The present study was conducted ill. order to get the normal blood chemical values of Korean Jindo dogs. Blood samples were taken from 160(♂34, ♀126) healthy Jindo dogs in Jindo area. The results obtained in this study were summarized as follows: 1. The mean values of serum total protein(TP), albumin(Alb) and globulin(Glb) content, cholesterol(Chole), magnesium(Mg), calcium(Ca), inorganic phosphate(P), potassium(K), sodium(Na) and chloride(Cl) concentration in the group of less than one year old were 6.64(♂6.62, ♀6.64), 3.63(♂3.57, ♀3.65) and 3.00(♂3.05, ♀2.99)g/100ml, 170.97(♂166.46, ♀172.68)mg/100ml, 1.45(♂1.43, ♀1.46), 5.76(♂5.62, ♀5.81), 4.80(♂4.95, ♀4.75), 4.84(♂4.72, ♀4.89), 148.93(♂148.79, ♀148.98) and 110.22(♂110.42, ♀110.14)mEq/L, respectively, whereas the TP, Alb and Glb content, Chole Mg, Ca, P, K, Na and Cl concentration in the group of one year old and more were 6.88(♂6.84, ♀6.89), 3.65(♂3.63, ♀3.66) and 3.23(♂3.21, ♀3.23)g/100ml, 167.48(♂173.80, ♀166.48)mg/100ml, 1.40(♂1.36, ♀1.40), 5.69(♂5.53, ♀5.71), 4.62(♂4.73, ♀4.60), 4.88(♂4.90, ♀4.87), 149.86(♂149.60, ♀149.90) and 110.03(♂110.70, ♀109.92)mEq/L, respectively. The ratios of mean serum albumin to globulin(A/G), calcium to inorganic phosphate(Ca/P) and sodium to potassium(Na/K) in the group of less than one year old were 1.21(♂1.17, ♀1.22), 1.20(♂1.14, ♀1.22) and 30.77(♂31.52, ♀30.47), respectively, whereas the A/G, Ca/P and Na/K in the group of one year old and more were 1.13(♂1.13, ♀1.13), 1.23(♂1.17, ♀1.24) and 30.71(♂30.53, ♀30.78), respectively. 2. The mean values of Alb content, Mg, Ca and K concentration, A/G and Ca/P ratio appeared to be higher in the female than in the male, whereas the reverse was the case with P concentration. No differences were found between male and female in the TP and Glb content, Chole, Na and Cl concentration and Na/K ratio. 3. The mean values of Glb content appeared to be higher in the group less than one year old than in the group of one year old and more, whereas the reverse was the case with A/G ratio. The mean values of TP and Alb content and Ca/P ratio in the age groups less than one year tended to increase with aging, whereas the reverse was the case with Ca and P concentration. No differences were found between age groups in the Mg, K, Na and Cl concentration and Na/K ratio.

• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.230-234
• /
• 1999

Barium titanyl oxalates (BTO) has been homogeneously prepared by thermal decomposition of dimethyl oxalate (DMO) in hydrochloric solution containing $Ba^{2+}$ and $Ti^{4+}$. Particles of BTO settled on the bottom of the beaker were collected at the aging time of 120 min using hydroxy propyl cellulose (HPC) as a dispersant. The reaction temperature, the concentration ratio of $[DMO]_0/([Ba^{2+}]_0+[Ti^{4+}]_0)$ and the existence of HPC were found to influence on morphologies of BTO, chemical yields and characteristics of barium titanates formed from their precursors.

• KSBB Journal
• /
• v.28 no.4
• /
• pp.254-259
• /
• 2013

Herein we present a diagnostic paper chip that can quantitatively detect albumin without external electronic reader and dispensing apparatus. We fabricated a diagnostic paper chip device by printing wax barrier on the paper and wicking it with citrate buffer and tetrabromophenol blue to detect albumin in sample solution. The paper chip is so simple that we dropped a sample solution at sample pad and measure the ratio of two travel distances of the sample solvent and albumin under the name of retention factor. Our result confirmed that the retention factor was constant in the samples with same concentration of albumin and useful determinant for the measurement of albumin concentration. The paper chip is affordable and equipment-free, and close to ideal point-of-care test in accordance with the assured criteria, outlined by the World Health Organization. We assume that this diagnostic paper chip will expand the concept of colorimetric determination and provide a inexpensive diagnostic method to aging society and developing country.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.3
• /
• pp.41-49
• /
• 2017

In this study, a series of laboratory and in-situ tests such as FVTs and CPTUs were carried out to evaluate undrained shear strength related to quasi overconsolidated characteristics in the near-surface clay at Busan new port. Using unconfined compression and field vane test results, correlation between undrained shear strength and effective overburden pressure, that is, equation of $10+0.262{\sigma}^{\prime}v_0$ (kPa) was obtained. From oedometer tests, OCR is around 1.9 at depths lower than 7 m and OCR below this depth is very close to unit. As stated by Hanzawa et al. (1983), a natural clay deposit in the near-surface, even in normally consolidated state, is more and less apparently overconsolidated due to aging effects such as chemical bonding. Based on this concept, it can be inferred that intercept of equation is mobilized due to chemical bonding irrespective of effective overburden pressure and strength incremental ratio in normally consolidated state is 0.262. From CPTU results, same trend was confirmed. The further study should be necessary to judge whether upper clay is under overconsolidated state due to chemical bonding or not based on the depositional environment.

• Journal of Adhesion and Interface
• /
• v.22 no.4
• /
• pp.118-127
• /
• 2021

In this study, the mechanical properties of vulcanized rubber were evaluated through compounding by controlling filler content to improve the mechanical properties of NBR rubber. Aramid and glass fibers with excellent heat resistance were used as fillers, and ceramics were additionally used in anticipation of a complementary effect, and as for the ceramic materials, needle-shaped and plate-shaped ceramics were used. Each filler was used in an amount of 5.0, 10.0, 15.0, and 20.0 phr in order to investigate the basic properties according to the amount of filler. To confirm the complementary effect through ceramic application, each 10.0 phr fiber and ceramic were mixed with 1:1 ratio to evaluate mechanical properties. As a result, it was confirmed that the decreasing ratio of tensile strength after heat aging was small in the order of aramid fiber, acicular ceramic, glass fiber, and plate ceramic in the case of applying the filler alone. In addition, the mechanical characteristics of vulcanized rubber using composite filler based on fibers and ceramics were evaluated, and it was confirmed that the composite filler had a complementary effect on thermal aging.

• The Journal of the Korea Contents Association
• /
• v.9 no.10
• /
• pp.451-463
• /
• 2009

The purpose of this research is to develop thin film materials and fabrication process for efficient $TiO_2$/CdTe solar cells. In this work photocatalyst titanium dioxide was prepared by sol-gel procedure according to reaction condition, the mole ratio of $H_2O$/TTIP, pH of solution and aging condition of powder. The prepared titanium dioxide was thermally treated from 300 to $750^{\circ}C$. Maximum intensity of anatase phase of titanium dioxide was achieved by calcination at $600^{\circ}C$ for 2 hr. And it was mixture of anatase and rutile phase when temperature of calcination was $750^{\circ}C$. It has been known that the properties of synthesized titanium dioxide according to aging time and calcination temperature was converted to anatase phase crystal on increasing of aging time. Also the current density has been increased with aging time and temperature, the efficiency has been increased with because of reason on above results. The formation of chemical bonding on oxygen and cadmium telluride under oxygen circumstances had been observed, and oxygen of thin film surface on cadmium telluride had been decreased with the treatment of chromate and hydrazine. As results had been shown that the energy conversion efficiency of cadmium telluride use by rapidly treatmented heat at the condition of $550^{\circ}C$ under air circumstance got 12.0%, 6.0% values according to $0.07cm^2$, $1.0cm^2$ surface area, respectively.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.5
• /
• pp.423-430
• /
• 2015

$Cu/ZnO/Al_2O_3$ catalysts for water gas shift (WGS) reaction were synthesized by co-precipitation method with the fixed molar ratio of Cu/Zn/Al precursors as 45/45/10. Copper and zinc precursor were added into sodium carbonate solution for precipitation and aged for 24h. During the aging period, aluminum precursor was added into the aging solution with different time gap from the precipitation starting point: 6h, 12h, and 18h. The resulting catalysts were characterized with SEM, XRD, BET surface measurement, $N_2O$ chemisorption, TPR, and $NH_3$-TPD analysis. The catalytic activity tests were carried out at a GHSV of $27,986h^{-1}$ and a temperature range of 200 to $400^{\circ}C$. The catalyst morphology and crystalline structures were not affected by aluminum precursor addition time. The Cu dispersion degree, surface area, and pore diameter depended on the aging time of Cu-Zn precipitate without the presence of $Al_2O_3$ precursor. Also, the interaction between the active substance and $Al_2O_3$ became more stronger as aging duration, with Al precursor presented in the solution, increased. Therefore, it was confirmed that aluminum precursor addition time affected the catalytic characteristics and their catalytic activities.

• Elastomers and Composites
• /
• v.46 no.1
• /
• pp.45-53
• /
• 2011

The effect of the silane coupling agent, bis(triethoxysilypropyl)tetrasulfide (TESPT), on mechanical properties of a silica-filled NBR compound for oilseal was investigated. Curing behavior and crosslinking density of the compounds were measured using ODR (oscillating disk rheometer) and swelling ratio in toluene. UTM (universal testing machine) and shore A hardness tester were used in order to study the characteristics of mechanical properties of original vulcanizates and aged ones with heated air and ASTM No. 3. oil. Recovery of elasticity which influences the performance and service life of oilseal was investigated by giving bending deformation to vulcanizates in aging condition. After bending aging test, recovery distance was measured and calculated angle of recovery from it. TR (temperature retraction) test was performed on these vulcanizates to determine the low temperature recovery behavior. Wear resistance was measured by Taber type abrasion tester. In addition, SEM was used to characterize the morphology of the worn surface of vulcanizates. The result showed that addition of TESPT into silica-filled compound improves not only compound flow-ability, interaction between NBR and silica and crosslinking density, but also hardness, 100% modulus, recovery of elasticity, wear resistance, heat resistance and ASTM No.3 oil resistance of vulcanizates.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.3
• /
• pp.284-290
• /
• 2012

Cement Fineness Modulus (CFM) is a method of expressing the distribution of particle sizes of cement in numeric form. If CFM is controlled through crush process of cement without modifying the chemical components or mineral composition of cement, it is judged to be able to produce a cement satisfying various requirements because it is estimated to enable various approaches to cement such as high early strength, moderate heat, low heat cement and so on. Therefore, in this study, as basic research for manufacturing special cement utilizing the controls of CFM, the intention was to review the impacts of CFM on the fundamental properties of concrete. To summarize the result, as mixture characteristics of fresh concrete, ratio of small aggregate and unit quantity were gradually increased, securing greater fluidity, with an increase in CFM, while the amount of AE and SP were reduced gradually. In addition, setting time was delayed as CFM increased. Furthermore, compression strength was relatively high during initial aging as CFM became smaller, but as time passed, compression strength became smaller, and it showed the same level of strength as aging time passed about three years.

• Journal of Adhesion and Interface
• /
• v.6 no.3
• /
• pp.10-18
• /
• 2005

The hard coatings on the polycarbonate plate were performed with the object of substitution the glass in the car to the polycarbonate plate. In this research, tetraethyl orthosilicate (TEOS), methyltriethoxysilane (MTES) were used to prepare the coatings by sol-gel process. The optimum conditions and formulation to get the excellent physical properties were determined. The pretreatment condition of polycarbonate plate, the mole ratio of TEOS and MTES, selection of the solvent, the aging time, the amount of acid catalyst, and the number of folds of coating were characterized. Pretreatment with poly(methyl methacrylate) was very effective to increase the adhesion strength. The smooth coating which got the 2 H class in pencil hardness was formed in this research by sol-gel process.