Browse > Article
http://dx.doi.org/10.17702/jai.2021.22.4.118

Mechanical Properties of NBR Rubber Composites Filled with Reinforced Fiber and Ceramics  

Kwon, Byeong-Jin (Department of Polymer Science and Engineering, Pusan National University)
Kim, Young-Min (Department of Polymer Science and Engineering, Pusan National University)
Lee, Danbi (Korea Institute of Footwear & Leather Technology)
Park, Soo-Yong (Department of Polymer Science and Engineering, Pusan National University)
Jung, Jinwoong (DONGAH Chemical Co., LTD.)
Chung, Ildoo (Department of Polymer Science and Engineering, Pusan National University)
Publication Information
Journal of Adhesion and Interface / v.22, no.4, 2021 , pp. 118-127 More about this Journal
Abstract
In this study, the mechanical properties of vulcanized rubber were evaluated through compounding by controlling filler content to improve the mechanical properties of NBR rubber. Aramid and glass fibers with excellent heat resistance were used as fillers, and ceramics were additionally used in anticipation of a complementary effect, and as for the ceramic materials, needle-shaped and plate-shaped ceramics were used. Each filler was used in an amount of 5.0, 10.0, 15.0, and 20.0 phr in order to investigate the basic properties according to the amount of filler. To confirm the complementary effect through ceramic application, each 10.0 phr fiber and ceramic were mixed with 1:1 ratio to evaluate mechanical properties. As a result, it was confirmed that the decreasing ratio of tensile strength after heat aging was small in the order of aramid fiber, acicular ceramic, glass fiber, and plate ceramic in the case of applying the filler alone. In addition, the mechanical characteristics of vulcanized rubber using composite filler based on fibers and ceramics were evaluated, and it was confirmed that the composite filler had a complementary effect on thermal aging.
Keywords
Vulcanized Rubber; Filler; Complementary Effect; Heat Aging; Physical Properties;
Citations & Related Records
연도 인용수 순위
  • Reference
1 S. Thomas, R. Stephen, Rubber Nanocomposites: Preparation, Properties, and Applications, 675, WILEY, NJ, USA (2009).
2 B. S. Thomas, R. C. Gupta, Renewable and Sustainable Envery Reviews. 54, 1323 (2016).   DOI
3 4M. Myhre, S. Saiwari, W. Diekes, J. Noordermeer, Rubber Chemistry and Technology, 85, 408 (2012).   DOI
4 S.-I. Inoue, T. Nishio, Journal of Applied Polymer Science, 103, 3957 (2007).   DOI
5 M. Q. Fetterman, Rubber Chemistry and Technology, 46, 927 (1973).   DOI
6 S. S. Park, C.-S. Ha, Journal of Adhesion and Interface, 21, 113 (2020).   DOI
7 M. Qian, W. Huang, J. Wang, X. Wang, W. Liu, Y. Zhu, Polymers, 11, 1763 (2019).   DOI
8 T.P. Sathishkumar, S. Satheeshkumar, J. Naveen, Jounal of Reinforced Plastics and Composites, 33, 1258 (2014).   DOI
9 A. O. Alhareb, H. M. Akil, Z. A. Ahmad, Polymers and Polymer Composites, 24, 71 (2016).   DOI
10 R. Jones, A. Szweda, D. Petrak, Composites Part A: Applied Science and Manufacturing, 30, 569 (1999).   DOI
11 M. A. Rashid, M. A. Mansur, P. Paramasivam, Journal of Composites for Construction, 9, 117 (2005).   DOI
12 T. R. Vijayaram, International Journal on Design and Manufacturing Technologies, 3, 25 (2009).   DOI
13 B, Li, X, Zhang, G. Qi, X. Wang, J. Zhang, P. Han, Y. Ru, J. Qiao, Polymers and Polymer Composites, 27, 582 (2019).   DOI
14 Y.-S. Cho, D. Cho, Journal of Adhesion and Interface, 19, 60 (2018).
15 J. E. Mark, Polymer Engineering and Science, 36, 2905 (1996).   DOI