• Proceedings of the Technology Innovation Conference
• /
• 1999.12a
• /
• pp.82-92
• /
• 1999

In case of Korea, the entire volume of TFT-LCD Top Chassis was previously imported from Japan. However, Se-jong Hitech in Korea has successfully introduced the mass production system using domestic technology, and even in terms of quality, cost and the delivery timing, the production capability of Korea now becomes superior to that of Japan. Se-jong Hitech has grown to be the most competitive one in the domestic market in Korea, and the current market share of the firm was turned out to be more than 70%. There reasons for the success of Se-jong Hitech might be the effort for fully credible relationship with the large corporations, the effective use of catch-up strategy, the core competence and the manager's business midset, etc.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.489-494
• /
• 2000

In the high speed driving conditions, the vibrational phenomena with relation to chassis system are becoming more important factors in chassis design and development. In this paper Commercial Dynamic program is used to model middle size bus for brake judder phenomenon. To verify the effects of a body structure in brake judder, body structure is modeled in flexible. Also mode shapes and frequencies are obtained from Commercial FEA program in the same condition of experimental test. The simulation results are compared to the experimental results and summarized

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.112-118
• /
• 2001

In this study the leakage current measurement method based on a porous ceramic is applied to check the conductive substance caused by the ionized particles. By using engine and chassis dynamometer and an experiment vehicle, in which the hydrocarbon sensor (HC sensor) was exposed to the exhaust gas to create the electrical signal, the HC sensor in the exhaust line checked the conductive ions in emission gas. Generally the output electrical signal of HC sensor is followed with amount of hydrocarbon in the experiments in cold start and operation. By combining the electrical signal, a measure of conductivity of exhaust gas with hydrocarbon can be provided by OBD (On Board Diagnosis) II and EMS (Engine Management System).

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.3
• /
• pp.34-41
• /
• 1996

This work deals with finding a suitable position correction algorithm of industrial robot based on measuring particular points, which calculates two dimensional correction quantities and the must allow visually acceptable door-chassis assembly task. Three optimizing algorithms corresponding to three differ- ent error based performance indices are compared and selected to the best one, in terms of the predefined total uniformity, line uniformity and computational time. The selected algorithm(Total Error Minimization) is implemented for a simple door-chassis model to show its effectiveness.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.116.1-116
• /
• 2001

In the near future, drive-by-wire systems will replace mechanical systems of vehicles. Since there would be no mechanical redundancy in the x-by-wire subsystem, it needs to improve the reliability of the system using fault diagnosis of sensors and actuators. This paper proposes a Kalman filter based fault diagnosis method for the vehicle with the drive-by-wire system, which includes steer-by-wire, brake-by-wire and throttle-by-wire systems. We will show that the proposed method is successful in fault detection and isolation for single sensor/actuator faults of the vehicle system.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.1
• /
• pp.127-134
• /
• 2006

In Korea, the number of recreational vehicle (RV) has been increased dramatically recent year. Now there are emission regulations for RV which include pollutants such as CO, HC, NOx, PM. However considering the trend of preferring RV, there needs more strict strategies to control emissions from this type of vehicle. For that reason, we studied emission characteristics of RV and provided basic emission data to evaluate the contribution of RV to the total air pollutant emissions and to establish RV emission management plan. A total of 21 RV were tested on the chassis dynamometer system ranging from small to large engine displacement by vehicle speed, fuel types, regulations and fuel efficiency in order to investigate the characteristics of CO, HC, NOx and PM. For the test modes, 10 different driving speed modes and CVS-75 mode were used. On the basis of this study, RV pollutants emission factors and management strategies will be proposed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.3
• /
• pp.383-391
• /
• 2006

In Korea, the major source of serious air pollution is motor vehicles. Air pollution from vehicles has been annually increased. Then the government will try to control the vehicle emission by applying the effective emission management policy for the manufactured and in-used car. It is necessary to correctly calculate the emission factor for successful propulsion of the vehicle emission control policy. In this study, correlation analysis of exhaust emissions from vehicles between CVS-75 mode and Korea mode was conducted. A total of 25 light-duty buses were tested on the chassis dynamometer system in order to measure CO, HC, NOx PM and fuel efficiency (F.E.). For the test modes, 10 different Korea modes and CVS-75 mode were used. As the result of correlation analysis between those modes, most of the correlation coefficients were higher than 0.90. On the basis of high correlation between those modes, correction factors by driving conditions were estimated. Through the results of this study, we obtained essential basic data to correct difference from those modes.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2E
• /
• pp.51-58
• /
• 2001

Equations of motion of an engine mount system including foundation flexibility are derived. Forced vibration analysis is carried out for the given engine mount system excited with the unbalanced force and moment. A new optimal design method for the engine mount system is proposed, in which vibration characteristics of the chassis frame structure are considered as design parameters.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.1
• /
• pp.103-111
• /
• 2016

This paper presents an adaptive variable weights tuning system for an integrated chassis control with electronic stability control (ESC) and active front steering (AFS) for lateral stability enhancement. After calculating the control yaw moment needed to stabilize a vehicle with a controller design method, it is distributed into the tire forces generated by ESC and AFS using weighted pseudo-inverse-based control allocation (WPCA). On a low friction road, lateral stability can deteriorate due to high vehicle speed. To cope with the problem, adaptive tuning rules on variable weights of the WPCA are proposed. To check the effectiveness of the proposed method, a simulation was performed on the vehicle simulation package, CarSim.

• Journal of Korea Port Economic Association
• /
• v.23 no.2
• /
• pp.121-144
• /
• 2007

In general, the design of container yard and container handling system on container terminal are focused on operation of shipside than service about chassis from outside(C/O). It is not efficient for chassis from outside. The purpose of this paper is functional assessment of efficient container terminal and for higher performance of container terminal. first, the items which are concerned with container handling at the planning of container terminal are investigated and extracted through the practical data analysis of container terminal. Also, verified problems of planning and present condition through the functional assessment. Secondly, the improvements for container throughput in container yard are proposed and examined the effectiveness of improvements about queuing time of chassis from outside and service time of transfer crane by the evaluation decision model based upon multi criteria objectives.