• ETRI Journal
• /
• 제27권1호
• /
• pp.64-74
• /
• 2005

Traditional Internet pricing schemes are coming under continual pressure to adapt to, and encourage, a changing mix of Internet applications and consumer usage patterns. Much research effort over the last decade has been focused on developing more efficient and attractive charging schemes. However, none of the proposed models has been widely deployed. This raises questions regarding the inhibiting factors and missing pieces that make pricing the Internet such a challenge. In this paper, we discuss the problems with current Internet pricing schemes, review the history of Internet pricing research over the last ten years, and summarize the key features and motivations of the most significant models. We develop a novel visual approach to comparing and evaluating such schemes using a three-dimensional (3D) metric encompassing technical efficiency, economic efficiency, and social impact. We address and discuss the important factors that have inhibited the deployment of the reviewed models and suggest productive areas of focus for future Internet pricing research.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.293-296
• /
• 2002

Surface relief holograms are fabricated by means of irradiation of laser interference patterns. The diffraction efficiency and the surface relief depth depend on the writing energy and the polarization of the writing laser beam. This structure is very stable at temperatures under glass transition temperature $T_g$ and can be erased by heating above $T_g$. We proposed a new technique to control the surface relief structure. The electric charge was deposited on the surface relief grating in a corona-depositing poling setup in an oven. The first-order diffraction efficiency measured before and after corona discharge increased from about 0.24 % to about 28 %. This diffraction efficiency increase is mainly caused by the increase of the relief depth caused by the electric charge. The relief depth is increased from 20 nm to 350 nm by corona charging. .

• 한국산학기술학회논문지
• /
• 제21권12호
• /
• pp.52-59
• /
• 2020

현행 국내의 주택용 전기요금은 월 전력 사용량에 따라 누진 단계를 적용하여 부과하는 방식으로 전기사용량이 많을 경우 전기요금이 급격하게 상승하는 구조로 이루어져 있다. 이러한 획일화된 전기요금 누진제는 소비자의 전력소비 패턴에 대한 고려가 부족한 점과 소비자의 선택권을 제한하는 측면에서 한계가 있다. 이에 산업통상자원부와 한국전력공사에서 계절과 시간대별 전기사용량에 따라 전기요금을 부과하는 방식인 주택용 계시별 요금제 기반의 실증이 이루어지고 있다. 본 논문에서는 대도시 소재 아파트 단지 5개동 362세대의 5년간 AMI 데이터 분석을 통해 10개의 전기사용 패턴을 도출하였다. 도출된 패턴을 국내의 기존 요금제인 주택용 전기요금제 및 현재 실증에 적용하고 있는 계시별 요금제인 일반형과 집중형 요금제 등 3개 요금제와 미국과 호주의 계시별 요금제 3개에 적용하여 각 패턴 별 선택형 요금제의 효과를 전기요금 편익 측면에서 분석한 결과 기존 요금제 대비 5개 패턴에서는 편익이 발생하였고 5개 패턴에서는 오히려 전기요금이 증가하였으며 이러한 현상은 실증 중인 국내요금을 포함하여 해외 요금제에서도 동일한 현상을 보이고 있음을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.523-523
• /
• 2012

As the wafer geometric requirements continuously complicated and minutes in tens of nanometers, the expectation of real-time add-on sensors for in-situ plasma process monitoring is rapidly increasing. Various industry applications, utilizing plasma impedance monitor (PIM) and optical emission spectroscopy (OES), on etch end point detection, etch chemistry investigation, health monitoring, fault detection and classification, and advanced process control are good examples. However, process monitoring in semiconductor manufacturing industry requires non-invasiveness. The hypothesis behind the optical monitoring of plasma induced ion current is for the monitoring of plasma induced charging damage in non-invasive optical way. In plasma dielectric via etching, the bombardment of reactive ions on exposed conductor patterns may induce electrical current. Induced electrical charge can further flow down to device level, and accumulated charges in the consecutive plasma processes during back-end metallization can create plasma induced charging damage to shift the threshold voltage of device. As a preliminary research for the hypothesis, we performed two phases experiment to measure the plasma induced current in etch environmental condition. We fabricated electrical test circuits to convert induced current to flickering frequency of LED output, and the flickering frequency was measured by high speed optical plasma monitoring system (OPMS) in 10 kHz. Current-frequency calibration was done in offline by applying stepwise current increase while LED flickering was measured. Once the performance of the test circuits was evaluated, a metal pad for collecting ion bombardment during plasma etch condition was placed inside etch chamber, and the LED output frequency was measured in real-time. It was successful to acquire high speed optical emission data acquisition in 10 kHz. Offline measurement with the test circuitry was satisfactory, and we are continuously investigating the potential of real-time in-situ plasma induce current measurement via OPMS.

• 전력전자학회논문지
• /
• 제16권5호
• /
• pp.440-447
• /
• 2011

본 논문에서는 계통연계를 위한 연료전지 발전시스템에서 부하 급증시 연료전지의 느린 응답특성 보상용 슈퍼커패시터 에너지 저장시스템에 대해 다루고자 한다. 이러한 경우 슈퍼커패시터의 충 방전을 위해서 양방향 DC/DC 컨버터가 사용되는데 기존의 컨버터는 넓은 영역에서 소프트 스위칭을 가능하게 하고 스위칭 시 순시 과전압을 감쇠시키기 위하여 클램핑 회로를 부가하는 등의 방법을 사용한다. 본 논문에서 제안하는 방식은 부가회로 없이 스위칭 패턴을 충전 및 방전 특성에 적합하게 함으로써 하드웨어 구성을 최소화 하였으며, 아울러 전 동작영역에서 영전압 또는 영전류 스위칭이 가능하도록 하여 효율이 극대화 되도록 하였다. 1 kW급 충 방전 시스템을 구현하여시뮬레이션과 실험을 통하여 제안한 방식의 타당성을 검증하였다.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.7-14
• /
• 2019

The type III vessel, which is used to store high-pressure hydrogen gas, is made by wrapping the vessel's liner with carbon fiber composite materials for strength performance and lightening. The liner seals the internal gas and the composite resists the internal pressure. The properties of the fiber composite material depends on the angle and thickness of the fiber. Thus, engineers should consider these various design variables. However, it significantly increases the design cost due to the trial and error under designing based on experience or experiments. And, for aluminum liners, fatigue loads due to using and charging could give a huge impact on the performance of the structure. However, fatigue failure does not necessarily occur in the position under the highest load in use. Therefore, for hydrogen storage vessel, fatigue evaluation according to design patterns is essential because stress distribution varies depend on composite layer patterns. This study performed an optimization analysis and evaluated a high-pressure hydrogen storage vessel to minimize these trial and error and improve the reliability of the structure, while simultaneously conducting fatigue assessment of all patterns derived from the optimization analysis process. The results of this study are thought to be useful in the strength improvement and life design of composite reinforced high-pressure storage vessels.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.69-72
• /
• 2008

Decay processes of accumulated charge in e-beam irradiated polymers during elevating temperature are observed using pulsed electro-acoustic measurement system. Since the polymeric materials have many superior properties such as light-weight, good mechanical strength, high flexibility and low cost, they are inevitable materials for spacecrafts. In space environment, however, the polymers sometimes have serious damage by irradiation of high energy charged particles. When the polymers of the spacecraft are irradiated by high energy charged particles, some of injected charges accumulate and remain for long time in the bulk of the polymers. Since the bulk charges sometimes cause the degradation or breakdown of the materials, the investigation of the charging and the decay processes in polymeric materials under change of temperature is important to decide an adequate material for the spacecrafts. By measuring the charge behavior in e-beam irradiated polymer, such as polyimide or polystyrene, it is found that the various accumulation and decay patterns are observed in each material. The results seem to be useful and be helpful to progress in the reliability of the polymers for the spacecraft.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.597-597
• /
• 2013

The resistive switching behaviors of Pt nanodisk on Nb-doped SrTiO3 single-crystal have been studied with conductive atomic force microscopy in ultra-high vacuum. The nanometer sizes of Pt disks were formed by using self-assembled patterns of silica nanospheres on Nb-doped SrTiO3 single-crystal semiconductor film using the Langmuir-Blodgett, followed by the metal deposition with e-beam evaporation. The conductance images shows the spatial mapping of the current flowing from the TiN coated AFM probe to Pt nanodisk surface on Nb：STO single-crystal substrate, that was simultaneously obtained with topography. The bipolar resistive switching behaviors of Pt nanodisk on Nb：STO single-crystal junctions was observed. By measuring the current-voltage spectroscopy after the forming process, we found that switching behavior depends on the charging and discharging of interface trap state that exhibit the high resistive state (HRS) and low resistive state (LRS), respectively. The results suggest that the bipolar resistive switching of Pt/Nb:STO single-crystal junctions can be performed without the electrochemical redox reaction between tip and sample with the potential application of nanometer scale resistive switching devices.

• KIEAE Journal
• /
• 제14권4호
• /
• pp.27-33
• /
• 2014

This study analyzed the electric vehicle recharging station status with recharging time limitation due to long waiting time, and figured out the user status by user interviews. And then this study verified the validity of hypothesis in terms of environmental design perspective and suggested layout of recharging station model. 21 recharging stations in Korea and station operation cases of 7 countries were examined. Except for the USA, the reality of electric vehicle recharging station today is the 1st proving stage focusing on the infrastructure construction of electric vehicle recharging station. It focuses on performance of recharging facility, use efficiency and operation environment of electric vehicle. About the effective waiting time of the user to use it should be studied. The current conditions of recharging station are as follows: Lack of independent recharging space, lack of facility that reduces external effect of recharging space, and lack of lounge for users during the waiting time. These three are essential factors constructing a suggesting model after basic layout, which needs proper measurement on the long recharging time and long waiting time. The essential factors are applied to electric vehicle recharging station layout so that users might use 'digital refresh" i.e. lounge and information contents service during the waiting time which provides convenience of recharging and emotional space with users. Such upgrade recharging station environmental model might resolve the burden of long recharging time which may contribute to the popularization of electric vehicles.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.280-285
• /
• 2014

In order to evaluate the insulation deterioration in the stator windings of five gas turbine generators(137 MVA, 13.8 kV) which has been operated for more than 13 years, diagnostic test and AC dielectric breakdown test were performed at phases A, B and C. These tests included measurements of AC current, dissipation factor, partial discharge (PD) magnitude and capacitance. ${\Delta}I$ and ${\Delta}tan{\delta}$ in all three phases (A, B and C) of No. 1 generator stator windings showed that they were in good condition but PD magnitude indicated marginally serviceable and bad level to the insulation condition. Overall analysis of the results suggested that the generator stator windings were indicated serious insulation deterioration and patterns of the PD in all three phases were analyzed to be internal, slot and spark discharges. After the diagnostic test, an AC overvoltage test was performed by gradually increasing the voltage applied to the generator stator windings until electrical insulation failure occurred, in order to determine the breakdown voltage. The breakdown voltage at phases A, B and C of No. 1 generator stator windings failed at 28.0 kV, 17.9 kV, and 21.3 kV, respectively. The breakdown voltage was lower than that expected for good-quality windings (28.6 kV) in a 13.8kV class generator. In the AC dielectric breakdown and diagnostic tests, there was a strong correlation between the breakdown voltage and the voltage at which charging current increases abruptly ($P_{i1}$, $P_{i2}$).