• 한국정보통신학회논문지
• /
• 제16권3호
• /
• pp.541-548
• /
• 2012

본 논문에서는 전기자동차의 보급 확대에 따른 충전 인프라 구축을 위해서 차량의 충전 시 충전상태를 모니터링 할 수 있는 충전 모니터링 시스템의 설계 방법을 제안하였다. 급속충전 기술은 현재 battery의 성능 및 안전성 등 다양한 요인에 따라 동작성능이 좌우되므로 모니터링 시스템에 의한 충전상태 파악은 충전 알고리즘의 개선, 전기자동차 BMS와 연동, 사용자와의 충전 프로세스 제어 등 다양한 작업환경과 연계되어 있다. 급속충전시스템의 동작상태를 CAN 프로토콜을 이용하여 배터리의 충전 상태 등을 실시간으로 감시가 가능한 시스템을 설계 제작하여 전기자동차용 battery를 최단시간에 최적화된 상태로 충전 가능하도록 CAN 통신기반 급속충전 모니터링 시스템을 설계하는 방법을 제안하고 시스템을 구현하여 성능을 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제30권6호
• /
• pp.505-512
• /
• 2019

According to the "hydrogen economy roadmap" announced recently by the government, fuel cell electric vehicle diffusion and hydrogen refueling station construction are actively being carried out to prepare for the hydrogen economy era. The station will be expanded by introducing various charging station models such as hydrogen complex charging station, package, and mobile. Accordingly, the study on the safety demonstration of the charging station and related regulations should be compromised. The purpose of this study is to collect monitoring data during charging according to the distinct four seasons in Korea, and to use it as safety demonstration data by analyzing the charging status, charging rate and charging time during charging.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.434-441
• /
• 2003

This paper presents a generator for stand-alone vibration monitoring system of bridge structure based on ambient vibration of bridge. In this paper, a novel electric power generator which has minimum effect of armature reaction is proposed. The related mechanical and electrical design equations are obtained and a pilot generator has been implemented. In addition, the charging system for extremely low generator current is discussed, and some improvements are identified for the system. This investigation reveals that diode characteristics of rectifier is dominant factor in the charging process. Finally, both the simulation, which uses real measurement data of the Namhae bridge as input of the pilot generator, and indoor test are carried out. The results showed the applicability and effectiveness of the stand-alone vibration powered generator.

• 조명전기설비학회논문지
• /
• 제29권8호
• /
• pp.40-48
• /
• 2015

In this paper, battery charging and discharging circuit with a single voltage power supply is proposed. The proposed circuit has the separated current path and charging-monitoring sequence control scheme. In the charging sequence, the proposed 2-level comparator combined with control signal of the micro-processor can control the constant charging current to protect the over current of the battery. Furthermore, the proposed circuit uses a periodic main power switch control to detect the discharging characteristics to estimate the approximated battery life-time. In the experiments, the proposed emergency power supply for emergency call system has 89% efficiency with 98% power factor. And the proposed sequence control scheme is well operated in the designed emergency power system.

• 한국인터넷방송통신학회논문지
• /
• 제12권5호
• /
• pp.31-37
• /
• 2012

본 논문에서는 무선 센서 네트워크를 활용하여 스마트그리드와 전기자동차의 충전 시스템 연계과정을 효과적으로 파악하고, 안티아일랜딩 기능을 적용하여 전기자동차 충전계통과 연계된 스마트그리드 모니터링 시스템을 제안한다. 스마트그리드 모니터링 시스템은 지그비(ZigBee)통신을 통해 무선으로 전력 모니터링 데이터를 수신하며, 별도의 물리적 연결 없이 원격 제어를 통해 전기자동차의 충전제어가 가능하다. 또한, 그리드 내 독립전원에 아일랜딩 현상이 발생하면, 아일랜딩 현상이 발생한 독립전원을 즉시 감지하여 차단하고 다른 독립전원으로 대체하여 그리드의 안정적인 운용을 하도록 하며, 실험을 통하여 스마트그리드 모니터링 시스템의 성능을 확인한다.

• Corrosion Science and Technology
• /
• 제16권4호
• /
• pp.201-208
• /
• 2017

A finite element analysis is proposed to study the effect of specimen dimensions on lateral diffusion of hydrogen during hydrogen permeation flux measurements. The error of measurement on thick specimens because of 1D diffusion approximation may be as much as 70%. A critical condition for accurate measurements is to designate the area of hydrogen monitoring/exit surface smaller than the area of hydrogen charging/entry surface. For thin to medium thickness specimens (ratio of thickness to specimen radius of 5:10 and below), the charging surface should be maximized and the monitoring surface should be minimized. In case of relatively thick specimens (ratio of thickness to specimen radius above of 5:10), use of a hydrogen-diffusion barrier on the specimen boundaries is recommended. It would completely eliminate lateral losses of hydrogen, but cannot eliminate the deviation towards 2D diffusion near the side edges. In such a case, the charging surface should be maximized and the monitoring surface should be as closer in dimension as the charging surface. A regression analysis was carried out and an analytical relationship between the maximum measurement error and the specimen dimensions is proposed.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.75-79
• /
• 2008

To control the lead storage batteries it is necessary to consider the characteristics of each battery connected in series. In this study, the charging and discharging characteristics of sealed lead storage batteries 12V/1.2A was investigated one by one through experiments. The results of the experiment shows that one should consider the state of each battery to prevent overcharge or deep discharge. Also, we designed an equipment to measure battery voltages simultaneously using micro-controller. This equipment will be useful for monitoring batteries at PV generation system.

• 전자공학회논문지
• /
• 제50권1호
• /
• pp.205-214
• /
• 2013

본 논문에서는 전기자동차 충전인프라를 효율적으로 보급하는데 도움이 되도록 가상 충전인프라 시뮬레이터를 구현하여 다양한 전기자동차 충전인프라 정보들(충전현황, 충전패턴, 충전부하량, 충전요금 등)를 생성하고 그 결과를 분석하였다. 제안하는 시뮬레이터는 교통량정보제공시스템과 국토해양부 등의 통계자료를 바탕으로 전기자동차의 운행특성을 모의하였으며, 그에 따른 충전부하량 및 충전패턴을 분석할 수 있도록 구현되었다. 또한, 한국전력공사(KEPCO)에서 고시한 전기자동차 충전요금(안)을 적용하여 충전유형별, 차량용도별 및 시간대별 충전요금정산 결과를 분석해 볼 수 있었다. 본 논문에서는 제안하는 전기자동차 충전인프라 시뮬레이터를 통하여 전기자동차 충전인프라를 구성할 때 고려해야하는 요소들을 현실적인 상황과 유사하게 모의하여 분석할 수 있었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.247-253
• /
• 2015

The components of an aero-engine gas path cannot be monitored in a timely way due to a lack of real-time monitoring technologies. As an attempt to address this problem, we have conducted research on a condition monitoring technology based on the charging characteristics of particles in an aero-engine gas path, and emphatically analyze the formation of particles in an aero-engine gas path, the charging mechanism of carbon particles and the factors that influence the charge quantity and polarity. The verification experiments are performed on the simulated experiment platform and a turbo-shaft engine test bench. The results show the carbon particles' carry charge, and an obvious change in the total electrostatic charge level in the aero-engine gas path due to the increased carbon particles produced by burning or abnormal metal particles; the charge number is related to the size of particles, and the bigger carbon particles carry a negative charge and metal particles carry a positive charge; the change in engine power can lead to an obvious change in the level of electrostatic charge in the gas path, and the change in electrostatic charge results from the extra carbon particles formed in the rich-oil burning process. The research provides a reference for establishing the baseline of electrostatic charge while the engine runs on different power. The study also demonstrates the validity of the electrostatic monitoring technology and establishes a base for developing the application of electrostatic monitoring technology in aero-engines.

• 한국지진공학회논문집
• /
• 제7권2호
• /
• pp.85-92
• /
• 2003

본 논문에서는 교량의 건전도 감시용 자립형 계측유닛을 위한 교량의 상시진동을 이용한 진동발전시스템을 제시하였다. 본 연구에서는 전기자 반작용의 영향을 최소화한 새로운 구조의 진동발전기를 제안하고, 기계적 및 전기적인 설계식을 유도한 다음, 시험용 진동발전기를 제작하였다. 또한, 매우 작은 발전 전류의 축전시스템에 대하여 고찰하고 개선점을 도출하였다. 축전시스템에 대한 고찰 결과, 정류기에 사용된 다이오드 특성이 충전과정에서 지배적임을 밝혔다. 마지막으로, 진동발전시스템 모델에 실측 남해대교 가속도 데이터를 적용한 시뮬레이션과 실내 실험을 수행하였고, 제작된 시험용 진동발전기의 적용성과 효용성을 확인할 수 있었다.