• 제목/요약/키워드: Charge property

검색결과 397건 처리시간 0.027초

High speed에 필요한 PLL charge pump 회로 설계 및 세부적인 성능 평가 (The design of a charge pump for the high speed operation of PLL circuits)

  • 신용석;윤재석;허창우
    • 한국정보통신학회논문지
    • /
    • 제2권2호
    • /
    • pp.267-273
    • /
    • 1998
  • 본 논문에서는 charge pump 회로를 차동 전류 스위치 구조를 갖는 회로를 사용하여 설계하였다. charge pump 회로의 스위칭 속도를 향상시키기 위하여 CMOS 보다 스위칭 속도가 빠른 MESFET를 이용하여 회로를 설계하였다. 차동 전류 스위치 구조의 charge pump회로가 고주파수 대역에서 동작하는데 따른 회로의 성능 및 안정성 문제를 제시하고 분석하였다. 또한 charge pump 회로의 성능을 평가하기 위한 척도를 세부적으로 정의함으로써 charge pump의 성능을 표현하게 된다. 설계된 회로는 HSPICE 시뮬레이터를 사용하여 시뮬레이션 하였으며, 시뮬레이션 결과 본 논문에서 제시한 구조가 1GHz급의 charge pump 회로로 설계가 가능하다는 것을 알 수 있었다.

  • PDF

탄산 에틸렌계 용액 중에서 생성되는 흑연 음극 표면피막의 형상 및 저항에 미치는 충방전 속도의 영향 (Effects of Charge-discharge Rate on Morphology and Resistance of Surface Film on a Graphite Negative Electrode in an Ethylene Carbonate-based Solution)

  • 정순기;김보겸
    • 한국수소및신에너지학회논문집
    • /
    • 제24권2호
    • /
    • pp.179-185
    • /
    • 2013
  • The behavior of surface film formation was greatly dependent on the speed of potential cycling. In $LiClO_4$ / EC + DEC, cyclic voltammetry results showed that the peaks originated from surface film formation on graphite electrode at the high charge-discharge rate was shifted to the lower potentials as the charge-discharge rate decrease. This indicates that surface films with different morphology and thickness were formed by different charge-discharge rate. Transmission electron microscopy (TEM) results indicated that the properties such as thickness and morphology of the surface film were greatly affected by the charge-discharge rate. Electrochemical impedance spectroscopy (EIS) showed that the resistance of surface film was affected by the speed of potential cycling. In addition, the charge transfer resistance was also dependent on the charge-discharge rate indicating that the charge transfer reaction was affected by the nature of surface film. TEM and EIS results suggested that the chemical property as well as the physical property of the surface film was affected by the charge-discharge rate.

입자 및 필터 대전상태에 따른 입자부하조건에서 공기정화 필터의 여과특성 (Influence of Particle and Filter Charge on Filtration Property of Air Filter under Particle Loading)

  • 지성미;손종렬;박현설
    • 한국대기환경학회지
    • /
    • 제28권6호
    • /
    • pp.644-655
    • /
    • 2012
  • As soon as a new air filter is applied to an air purification process, the filter gets loaded with dust particles. Thus, the study on the particle loading characteristics of air filter is very essential in order to understand the real filtration phenomena during filter use. In this study, we investigated the effect of particle and filter charge on the particle loading property of air filter. Charged filter and uncharged filter prepared by discharging the charged filter by isopropyl alcohol were used as test samples, and three types of particle having different charge states were supplied to filters tested. For neutralized particles there was a big difference in areal mass loading rates between charged and uncharged filters due to the very small amount of particle charge, on the other hand the difference was diminished for atomized particle and finally almost vanished for corona charged particles. The pressure drop of filter loaded with corona charged particles was only half of those for neutralized and atomized particles at the same areal mass loading because of the porous structure of particle deposit formed on filter fibers, caused by the space charge effect between particles.

분광기에 고 분해능 Charge Coupled Device의 설계 및 제작에 의한 Hematoporphyrin Derivative의 분석 (Analysis of Hematoporphyrin Derivative by Design and Manufacture of High Resolution Charge Coupled Device in Spectrometry)

  • 김기준
    • 한국응용과학기술학회지
    • /
    • 제22권1호
    • /
    • pp.77-83
    • /
    • 2005
  • The influence of fluorescence, scattering, and absorbance in turbid material by light scattering was interpreted by the scattered fluorescence intensity and wavelength. The effect of optical property in scattering media was investigated. It is very important to study the charge coupled device(CCD) in spectrometry because we can use the molecular energy level, molecular structure, absorption or emission, intermolecular reaction, weakly bound molecular energy, photochemistry, fluorescence and photodynamic therapy. CCD is very essential to study the molecular structure and medical engineering combined laser spectroscopy in the modem physical and chemistry. Accordingly, this study has designed and manufactured the electromagnetic spectrometry with CCD, and has analyzed the hematoporphyrin derivative.

Viologen 유도체를 이용한 항만오염물질의 전기화학적 센싱 특성 연구 (Study on Electrochemical Sensing Property of Harbor Pollutants using Viologen Derivative)

  • 박상현;이동윤;권영수
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
    • /
    • pp.119-120
    • /
    • 2008
  • In this paper, viologen derivative is used as charge transfer material to develop sensors for detecting the organic pollutants which are the main reason of harbor pollution. We fabricated self-assembled monolayers of viologen derivative on gold electrode of QCM and investigated an electrochemical behavior property. We also determined electrochemical sensing property about environmental pollution materials such as bezene, phosphate and surfactant through quantitative and qualitative analysis of charge transfer using intrinsic property of viologen derivative by temperature and concentration change. From the achieved results, we can apply and develope the detecting sensors for harbor pollutants.

  • PDF

비정질 셀레늄 필름의 공명 비행시간 조사 (Time of Fight Resonace Investigation of Amorphous Selenium Films)

  • 박지군;박성광;이동길;최장용;안상호;은충기;남상희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
    • /
    • pp.501-504
    • /
    • 2001
  • We used time-of-flight method to analyze transport properties of charge carrier which is produced by X-ray exposure. It is the research of charge transport and specific property of trap that is performed in direct digital x-ray image receptor. But the results shows us different measurement value of electron and charge drift mobility and it is difficult to precise analysis about charge transport properties and trap mechanism. We measured transit time and drift mobility of charge carriers using time-of-flight method to evaluate the correlation of a-Se thickness change and electric field. We made a testing glass with a-Se of 400 ${\mu}m$ thickness on coming glass using thermoevaporation method and built Au electrode with 300nm, $2{\varphi}$ on both sides of a-Se, As a result of this experiment, electron and hole transit time was each $229.17{\mu}s$ and $8.73{\mu}s$ at $10V/{\mu}m$ electric field and Drift mobility was each $0.00174 cm^{2}/V{\cdot}s$, $0.04584cm^{2}/V{\cdot}s$.

  • PDF

비정질 셀레늄 필름의 공명 비행시간 조사 (Time of Flight Resonace Investigation of Amorphous Selenium Films)

  • 박지군;박성광;이동길;최장용;안상호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집
    • /
    • pp.501-504
    • /
    • 2001
  • We used time-of-flight method to analyse transport properties of charge carrier which is produced by X-ray exposure. It is the research of charge transport and specific property of trap that is performed in direct digital x-ray image receptor. But the results shows us different measurement value of electron and charge drift mobility and it is difficult to precise analysis about charge transport properties and trap mechanism. We measured transit time and drift mobility of charge carriers using time-of-fight method to evaluate the correlation of a-Se thickness change and electric field. We made a testing glass with a-Se of 470 ${\mu}{\textrm}{m}$ thickness on corning glass using thermoevaporation method and built Au electrode with 300nm, 2$\phi$ on both sides of a-Se. As a result of this experiment, electron and hole transit time was each 229.17 $\mu$s and 8.737 $\mu$s at 10V/${\mu}{\textrm}{m}$ electric field and Drift mobility was each 0.00174 $\textrm{cm}^2$/V.s, 0.04584 $\textrm{cm}^2$/V.s.

  • PDF

경혈 및 경락의 전기적 특성에 관한 또 다른 이해 (A new opinion about the electrical peculiarity of meridian and acupoint)

  • 안성훈
    • Korean Journal of Acupuncture
    • /
    • 제25권2호
    • /
    • pp.33-41
    • /
    • 2008
  • Objectives : The aim of this study was to understand electro-physiological peculiarity in meridian and acupoints, and understand acupuncture therapy mechanism as an electro-physiological viewpoints. Methods : I reviewed the articles on the electro-physiological peculiarity of the meridian and acupoints Results and Conclusions : It has been reported that meridian and acupoints have high-electrical conductivity and row-electrical resistance. On this scientific basis, to understand the mechanism of acupuncture therapy, I made some hypotheses. At first, there is electro-property in meridian and acupoint. The second, energy flowing in meridian is related with electro-property. The third, there is electronic interaction between practitioner of acupuncture therapy and patient receiving acupuncture therapy. The forth, acupuncture effects which may be expressed by the electro-charge capacity is transfered between practitioner and patient via acupuncture. Electro-charge induced via acupuncture in practitioner may be an important factor that initiate the electro-charge changes in meridian and acupoint of patient.

  • PDF

나노 콜로이달 실리카를 이용한 포장용지의 미끄럼특성 제어 (The Control of Anti-slip Characteristics of Packaging Paper Using Nano-colloidal Silica)

  • 이원노;김형진
    • 펄프종이기술
    • /
    • 제37권3호
    • /
    • pp.33-40
    • /
    • 2005
  • In this study, a nano-colloidal silica sol was applied to control the anti-slip property by spraying on kraft paper. Two kinds of nano-colloidal silica sol which have cationic and anionic charge were applied in kraft paper, and the friction and physical strength properties of kraft paper were investigated. The application of colloidal silica sol on wet web in wet-end process by spraying method was tried to improve the friction property and to avoid the general problems of machine contaminations caused by the scattering of sprayed silica particles in dryer part. The physical properties of sheet were also improved by the application of wet web spraying method, and the optimum conditions of wet web spraying operation were closely related with the conditions of pH and electrical charge of wet web and silica sol.

열처리 조건에 따른 $LiNiO_2$의 합성과 충방전 특성 (The Synthesis and Charge/discharge Properties of $LiNiO_2$ according to heat treatment condition)

  • 이하나;전대규;최형기;김경수;구할본
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 하계학술대회 논문집 C
    • /
    • pp.1603-1605
    • /
    • 1997
  • $LiNiO_2$ is prepared by heating LiOH $H_2O$ and $Ni(OH)_2$ (mole ratio 1:1). In this study, we investigated X-ray diffraction, and charge/discharge property heat treatment condition and conductive agent sort and volume of $LiNiO_2$ prepared at various temperature and time. All $LiNiO_2$ prepared at this study showed hexagonal structure. In charge/discharge capacities, heated at $O_2$ than air and $750^{\circ}C$ than $700^{\circ}C$, specific capacity is higher. Therefore, when preliminary heat at $650^{\circ}C$ $O_2$ and heat at $750^{\circ}C$ carried out, charge/discharge property is best.

  • PDF