• 설비공학논문집
• /
• 제19권10호
• /
• pp.703-709
• /
• 2007

Much energy is used in occupying stage of the Building Life Cycle. Electric charge is one of the various factors that influence on energy use of residents. This study focused on electric charge and searched that whether electric charge affects residents' behavior of operating air conditioner and their controlled indoor climate. We surveyed three groups for field study ; A group is residents who live in a studio apartment, B group is residents who live in a university dormitory and C group is residents who live in a apartment with their family. The A and C groups are charged for electric as energy consumption they used. And the B group is students who live in a university dormitory and they are not charged for their energy consumption. We measured the time to use the air conditioner for cooling, on/off temperature of air conditioner, and room air temperature for these three groups. The result shows that consideration for electric charge affects to the residents' behavior of operating air conditioner and their acceptable thermal range.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.111-115
• /
• 2002

To understand the discharge characteristics in AC-PDP, it is necessary to study on the wall charge behavior. But, it is difficult to measure the wall charge directly. In this paper, the V-Q Lissajous' figure is used to measure the wall charge indirectly and analyze the wall charge behavior. With the V-Q Lissajous' figure, the discharge characteristics of AC-PDP are studied according to vary driving conditions, such as the frequency, pulse duty ratio, and rising & falling time. As a result, the V-Q Lissajous' figure is used to measure the discharge characteristics of the AC-PDP. It is confirmed that firing initial voltage and firing final voltage for discharge are effected by the aboved variables. Related with the wall voltage generation, it is thought that the difference of the slope at the V-Q Lissajous' figure is caused by charged ions inside the dielectric layer.

• Transactions on Electrical and Electronic Materials
• /
• 제7권5호
• /
• pp.224-229
• /
• 2006

Many studies have been done on the application of residual charge measurement in cable degradation diagnosis. In this paper, the behavior of residual charges measured with water-tree degraded XLPE sheets and cable are discussed. At charge injection process, the charge is injected by applying dc voltage as a conventional method, suddenly cut-off ac voltage or impulse voltage. Therefore the residual charge is influenced by the applying process. At charge release process, transient dc current flows when applying ac high voltage and also ac high voltage superimposed to dc low voltage. From the results, new diagnosis method is suggested.

• 한국콘텐츠학회논문지
• /
• 제16권10호
• /
• pp.730-744
• /
• 2016

본 연구는 팀장의 변혁적 리더십에 영향을 주는 차상위 리더의 윤리적 리더십의 효과를 실증함과 동시에 차상위 리더의 윤리적 리더십과 팀장의 변혁적 리더십이 구성원의 선제적 행동(주도적 행동, 도움행동)에 미치는 영향을 규명하였다. 또한 차상위 리더의 도덕적 행동과 구성원의 선제적 행동의 관계에서 팀장의 변혁적 리더십의 매개역할을 검증하였다. 실증분석 결과, 먼저 차상위 리더의 윤리적 리더십 중 도덕적 행동이 팀장의 변혁적 리더십에 통계적으로 유의미한 긍정적인 영향을 주었다. 그러나 차상위 리더의 행동진실성과 맥락적 일관성은 통계적으로는 유의미하지 않았다. 둘째, 차상위 리더의 도덕적 행동은 구성원의 선제적 행동(주도적 행동, 도움행동)에 긍정적인 영향을 주었다. 또한 차상위 리더의 행동진실성은 구성원의 주도적 행동에만 긍정적인 영향을 주었다. 그러나 차상위 리더의 맥락적 일관성은 구성원의 선제적 행동과 통계적으로 유의미하지 않았다. 셋째, 팀장의 변혁적 리더십은 구성원의 선제적 행동(주도적 행동, 도움행동)에 긍정적인 영향을 주었다. 마지막으로 차상위 리더의 도덕적 행동과 구성원의 선제적 행동(주도적 행동, 도움행동)의 관계에서 팀장의 변혁적 리더십은 부분매개역할을 수행하였다. 그러나 차상위 리더의 행동진실성 및 맥락적 일관성과 구성원의 선제적 행동과는 매개효과가 검증되지 않았다. 마지막으로 토의 및 결론을 통해서 본 연구의 시사점과 한계점 및 향후 연구방향을 제시하였다.

• 한국주조공학회지
• /
• 제42권6호
• /
• pp.347-357
• /
• 2022

본 연구에서는 주조공장의 장입재 충전 거동을 3차원적으로 시각화하고자 하였다. 장입재와 용해로의 실제 조건을 반영하여 시뮬레이션하였다. 3차원 시각화 시뮬레이션이 제조 현장의 장입재 충전 거동을 사실적으로 잘 구현하는지 확인하였다. 3차원 시각화 시뮬레이션에 의한 현실적인 충전 상태를 이상적인 충전 상태와 비교하였다. 어떤 경우에 두 충전 상태의 차이가 발생하는지 분석하였다. 3차원 시각화 시뮬레이션을 제조 공정에 적용할 경우의 특징을 살펴보았고, 주조 분야에서의 여러 활용 방안을 제안하였다.

• 대한전기학회논문지
• /
• 제41권1호
• /
• pp.42-49
• /
• 1992

Charge accumulation characteristics in low density polyethylene (LDPE) has been discussed based upon the internal charge distrubution measured by the pulsed electroacoustic technique. When the negative voltage with respect to earth is applied to the upper electrode, the negative charges near the anode and the positive charges near the cathode are accumulated in LDPE. Also, there was an asymmetric behavior of charge accumulation exhibiting that the charge accumulation near the anode keeps increasing whereas that near the cathode increases first and then decreases. Besides, under the present test conditions the internal charge distrubution becomes stabilized eventually. When the positive voltage with respect to earth is applied to the upper electrode, on the other hand, no such asymmetric charge accumulation was found. Therefore, it can be concluded that the heterocharges are accumulated at the surface region of LDPE subjected to high do voltages and that the begavior of charge accumulation depends on the polarity of do voltage and the position of charge accumulation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1203-1205
• /
• 2007

Confinement of charge carrier and exciton is the essential factor for enhancing the efficiency and stability of the electrophosphorescent devices. The interplay between the properties of emitters and other adjacent layers are studied based on the physical interpretation with difference of energy level, charge carrier mobility, and corresponding charge-trapping behavior.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.183-186
• /
• 2003

A finite element-based, integrated process model is presented for a three dimensional, coupled analysis of the thermal and mechanical behavior of type 304 stainless slab during hot charge rolling (HCR) and cold charge rolling (CCR) processes. The validity of the proposed model is examined through comparison with measurements. The susceptibility on micro-crack initiation or propagation due to the thermal stress in these two different process conditions was examined. The model's capability of revealing the effect of diverse process parameters is demonstrated through a series of process simulation.

• 한국군사과학기술학회지
• /
• 제17권5호
• /
• pp.577-584
• /
• 2014

In this study, the behavior of a shaped charge projectile's metal jet was analyzed using flash radiography. The projectile was installed horizontally to observe the behavior of jet for enough time. While the X-ray tube heads are fixed at one point, the behavior range of the jet is wide in this experimental set up, therefore the angle between the X-ray tube heads and the jet tip is changed continuously as jet moves forward. Jet particle's locations calculated from the X-ray films become different from their real positions under this situation because of the film to object distance(FTOD) and correction for error by FTOD is required. In this study, a method was devised to correct the error by FTOD and this was applied for the investigation of jet behavior of a 70 mm caliber's shaped charge.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1925-1928
• /
• 1996

In this work, the behavior of conducting wire type particles existing inside the cylinder type coaxial electrode has been systematically investigated by charge simulation method and electrostatic force analysis from the view point of the acquired charging before being lifted off into the gap under the high ac voltage. Spheroidal charge are adopted as a image charge for the CSM analysis in order to calculate the acquired charges of the particles which are erected on the surface of the outer electrode. For this purpose, different material of the particle and their lengths and diameters have been considered in view to calculate their lift-off field, acquired charge and to understand their effect on the lift-off voltage. The results imply that the particle lengths and diameter have an different influence on the particle behavior in GIS system.