• 한국지구과학회지
• /
• 제30권2호
• /
• pp.176-184
• /
• 2009

본 연구의 목적은 조암광물의 광학적 특징에 대한 웹 컨텐츠를 개발하고 적용하는데 있다. 개발된 웹 콘텐츠는 학습 목표와 교수 학습 내용을 명료하게 보여주고 학습 내용의 접근과 항목간의 이동을 원활히 하는 시스템을 구축하는 한편 중고등 학교 교과서에서 가장 많이 인용되는 8종의 조암광물에 대한 광학적 특징을 동영상과 사진으로 제시하여 학생들의 광물에 대한 이해도를 높였다. 개발된 웹 컨텐츠를 수업에 적용한 후 MALSM를 이용한 교수-학습 자료로서의 질적 수준과 학습 효과를 분석한 결과 대부분의 학생들은 수업목표, 학습내용, 수업전략, 화면구성, 이용의 편의성, 학습자료 항목에서 긍정적인 반응을 보였다. 웹 컨텐츠를 이용한 수업을 받은 학생 중에서 약 62%의 학생들이 편광현미경으로 박편상의 조암광물을 동정할 수 있었다.

• 한국지반공학회지:지반
• /
• 제14권5호
• /
• pp.53-66
• /
• 1998

풍화토는 암석이 풍화되어 생성되기 때문에 모암과 풍화과정에 따라 그 특성이 결정된다. 따라서, 풍화토의 특성을 고찰하기 위해서는 먼저 모암에 대한 고찰과 풍화과정을 지배하는 풍화환경에 대한 고찰이 이루어져야 한다. 이번 연구에서는 모암과 풍화정도에 따른 풍화의 특성을 고찰하기 위해 화강암 풍화토와 편마암 풍과토를 불교란 또는 교란상태로 채취한 후. 기본 물성시험, 암석학적 시험 그리고 다양한 전단시험을 실시하였다. 여러 가지 시험의 결과에서 암석의 풍화는 모암의 조암광물 분포 및 생성특성과 밀접한 관계가 있음을 확인하였다. 화강암 풍화토의 경우 모암의 비방향적인 성격 때문에 현장응력 상태화 전단특성이 등방적으로 나타났으며, 편마암 풍과토는 그 내부에 존재하는 불연속면이 역학적 거동을 지배하는 방향적 특성을 갖는 것으로 나타났다. 또한 식영이 장석 또는 운모보다 풍화저항력이 크다는 사실의 확인과 함께 풍화대의 두께가 구성 조암광물에 크게 영향을 받는다는 결론을 얻었다.

• Geomechanics and Engineering
• /
• 제30권1호
• /
• pp.93-105
• /
• 2022

With the exploitation of natural resources in China, underground resource extraction and underground space development, as well as other engineering activities are increasing, resulting in the creation of many defective rocks. In this paper, uniaxial compression tests were performed on rocks with double holes and fractures at different angles using particle flow code (PFC2D) numerical simulations and laboratory experiments. The failure behavior and mechanical properties of rock samples with holes and fractures at different angles were analyzed. The failure modes of rock with defects at different angles were identified. The fracture propagation and stress evolution characteristics of rock with fractures at different angles were determined. The results reveal that compared to intact rocks, the peak stress, elastic modulus, peak strain, initiation stress, and damage stress of fractured rocks with different fracture angles around holes are lower. As the fracture angle increases, the gap in mechanical properties between the defective rock and the intact rock gradually decreased. In the force chain diagram, the compressive stress concentration range of the combined defect of cracks and holes starts to decrease, and the model is gradually destroyed as the tensile stress range gradually increases. When the peak stress is reached, the acoustic emission energy is highest and the rock undergoes brittle damage. Through a comparative study using laboratory tests, the results of laboratory real rocks and numerical simulation experiments were verified and the macroscopic failure characteristics of the real and simulated rocks were determined to be similar. This study can help us correctly understand the mechanical properties of rocks with defects and provide theoretical guidance for practical rock engineering.

• 터널과지하공간
• /
• 제22권6호
• /
• pp.393-402
• /
• 2012

정상부가 개착된 암반사면에 지중경사계를 설치하여 개착사면의 내부 거동을 계측하였으며, 국지적으로 배후면 방향으로의 거동이 관찰되었다. 사면 거동, 특히 배후면 방향으로의 거동을 유발시키는 원인을 분석하기 위하여 시추작업을 수행하였다. 추출된 시추코어를 관찰하여 사면 암반의 암석학적 취약성을 조사하였으며, 공내 BIPS 영상을 취득하여 암반의 구조적 특성을 분석하였다. 코어 절리 시료를 이용하여 불연속면의 역학적 특성을 측정하였으며, 탄질물이 협재된 절리 시료에 대한 직접전단시험을 수행하여 전단강도를 측정하였다. 사면 거동에 대한 계측결과를 사면 암반과 탄질물이 협재된 절리들의 구조적 및 역학적 특성을 종합적으로 고려하여 해석하였으며, 절리에 협재된 탄질물 및 팽윤성 점토광물의 존재에 의해 국지적인 사면거동이 지배될 수 있는 잠재성을 확인하였다.

• 터널과지하공간
• /
• 제19권2호
• /
• pp.132-145
• /
• 2009

암반내 존재하는 단층은 암반의 거동에 미치는 영향이 매우 크기 때문에 암반사면, 터널과 같은 암반구조물의 설계 및 시공에 있어서 단층특성에 대한 조사는 무엇보다 중요하다 할 수 있다. 그러나 설계단계에서 이러한 특성을 파악하기에 한계가 있기 때문에 시공중 막장관찰과 추가지반조사를 통하여 터널주변에 존재하는 단층의 분포 및 공학적 특성에 대하여 조사하여야 한다. 본 연구에서는 운모편암지역에서의 대단면 터널 공사중 설계시 파악되지 않은 대규모 스러스트 단층대가 확인됨에 따라, 단층대의 특성을 규명하기 위하여 다양한 지질조사 및 현장시험을 실시하였다. 이러한 지반조사결과를 바탕으로 단층의 성인, 구조지질적 분포특성 및 단층암의 공학적 특성을 파악하였으며, 단층대 통과구간에서 안전하게 터널을 굴착할 수 있도록 합리적인 지보 및 보강대책을 수립하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1166-1171
• /
• 2008

Despite of the increasing number of the application of drilled shaft piles in construction site, most studies on pile capacity have been focused on the side shear resistance. But it is common that the drilled shaft is socketed on the rock so as to use its bearing resistance. The prediction of the end movement and characteristics of the bearing capacity of the pile is great important as well. Therefore, a series of scaled model tests were carried out in order to study the characteristics of the bearing capacity on rock mass. The material of the test block was cement mortar which was mixed with sand, cement and water, and the size of a test block size was $240{\times}240{\times}240mm$. The axial load was applied by a miniaturized pile of 45mm in diameter and flat jacks and steel plate were used for confinement to simulate the real underground loading conditions. The relation of load-displacement was measured in various different conditions of rock mass such as strength, discontinuity of the rock mass and in-situ stress, so q-w curves of the end of the pile were presented for each condition.

• Structural Engineering and Mechanics
• /
• 제72권4호
• /
• pp.469-477
• /
• 2019

The understanding of tool-rock interaction mechanism is of high essence for improving the rock breaking efficiency and optimizing the drilling parameters in mechanical rock breaking. In this study, the tool-rock interaction models of indentation and cutting are carried out by employing the discrete element method (DEM) to examine the rock failure modes of various brittleness rocks and critical indentation and cutting depths of the ductile to brittle failure mode transition. The results show that the cluster size and inter-cluster to intra-cluster bond strength ratio are the key factors which influence the UCS magnitude and the UCS to BTS ratio. The UCS to BTS strength ratio can be increased to a more realistic value using clustered rock model so that the characteristics of real rocks can be better represented. The critical indentation and cutting depth decrease with the brittleness of rock increases and the decreasing rate reduces dramatically against the brittleness value. This effort may lead to a better understanding of rock breaking mechanisms in mechanical excavation, and may contribute to the improvement in the design of rock excavation machines and the related parameters determination.

• Geomechanics and Engineering
• /
• 제18권6호
• /
• pp.567-574
• /
• 2019

In order to study the effect of stress and water pressure on the permeability of fractured rock mass under three-dimensional stress conditions, a single fracture triaxial stress-seepage coupling model was established; By using the stress-seepage coupling true triaxial test system, large-scale rock specimens were taken as the research object to carry out the coupling test of stress and seepage, the fitting formula of permeability coefficient was obtained. The influence of three-dimensional stress and water pressure on the permeability coefficient of fractured rock mass was discussed. The results show that the three-dimensional stress and water pressure have a significant effect on the fracture permeability coefficient, showing a negative exponential relationship. Under certain water pressure conditions, the permeability coefficient decreases with the increase of the three-dimensional stress, and the normal principal stress plays a dominant role in the permeability. Under certain stress conditions, the permeability coefficient increases when the water pressure increases. Further analysis shows that when the gob floor rock mass is changed from high stress to unloading state, the seepage characteristics of the cracked channels will be evidently strengthened.

• Structural Engineering and Mechanics
• /
• 제72권2호
• /
• pp.275-291
• /
• 2019

In a super-large underground with "large span and high side wall", it is buried in mountains with uneven lithology, complicated geostress field and developed geological structure. These surrounding rocks are more susceptible to stability issues during the construction period. This paper takes the left bank of Baihetan hydropower station (span is 34m) as a case study example, wherein the deformation mechanism of surrounding rock appears prominent. Through analysis of geological, geophysical, construction and monitoring data, the deformation characteristics and factors are concluded. The failure mechanism, spatial distribution characteristics, and evolution mechanism are also discussed, where rock mechanics theory, $FLAC^{3D}$ numerical simulation, rock creep theory, and the theory of center point are combined. In general, huge underground cavern stability issues has arisen with respect to huge-scale and adverse geological conditions since settling these issues will have milestone significance based on the evolutionary pattern of the surrounding rock and the correlation analyses, the rational structure of the factors, and the method of nonlinear regression modeling with regard to the construction and development of hydropower engineering projects among the worldwide.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.485-492
• /
• 2005

Since blast-induced vibration may cause serious problem to the rock mass as well as the nearby structures, the prediction of blast-induced vibration and the stability evaluation must be performed before blasting activities. Dynamic analysis has been Increased recently in order to analyze the effect of the blast-induced vibration. Most of the previous studies, however, were based on the continuum analysis unable to consider rock joints which significantly affect the wave propagation and attenuation characteristics. They also adopted pressure curves estimated by theoretical or empirical equations as input detonation load, thus there were very difficult to reflect the characteristics of propagating media. In this study, therefore, we suggested a discontinuum dynamic analysis technique which uses velocity waveform obtained from a test blast as an input detonation load. A distinct element program, UDEC was used to consider the effect of rock joints. In order to verify the validity of proposed method, the test blast was simulated. The predicted results from the proposed method showed a good agreement with the measured vibration data from the test blast Through the dynamic numerical modelling on the planned road tunnel and slope, we evaluated the effect of blast-induced vibration and the stability of rock slope.