• Journal of the Korean Society of Safety
• /
• v.17 no.3
• /
• pp.1-6
• /
• 2002

A dynamic characteristics of shock absorber in the various excitation is investigated experimentally. Work diagrams and characteristic curves are used as a experimental standard. The various excitation conditions temperature and noise are very important factors in associated with the reduction of damping force. It is found that the heat occurrence from shock absorber, the gas shock absorber is much higher than oil shock absorber and increased in high speed. As to the variation of damping force, there are no change when the speed is low but we fixed amount of variation by increasing speed and change of new and old decrease. The sound pressure of the swash noise from cycle of shock absorber, we compared with theory sound pressure by experiment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.385-388
• /
• 1997

As the environmental regulations become stricter, new machining technologies are being developed which takes envi ronmenta 1 aspects into account . Since cut t ing oi I has some impact on environment. many researches are being carried out to minimize the use of cutting oi I. The methods for minimizing cutting oil usage includes the following techniques: I ) Cooling of tools and work piece. 2) Useage of compressed cooling air for the removal of chip. 3) Minimal useage of environment-friendly vegetable cutt:ngoiI for lubrication between chip and tools. Since the turning machine is continuous, tools are under constant thermal load and tool wear increases as the lubricative performance degrades. Also surface roughnesses have a direct influence on turning. In order to examine the characteristics of turningmachining, this work investigates experimentally the degree of tool wear and characteristics of surface roughness in relation to machining conditions, supply methods, and cooling methods.

• Journal of Power System Engineering
• /
• v.14 no.4
• /
• pp.5-10
• /
• 2010

This study was investigated the effect on operating characteristics of apparatus according to frosting and defrosting to develop of new defrosting equipment. The results showed as following. Frost was almost removed using the defrosting equipment with roll brush type that defrosting is possible under operating condition. Also, the temperature of compressor inlet, evaporator inlet and outlet showed higher value because of heat transfer resistance of cooling pipe frost comparing with defrosting condition. And the compressor work showed 10% lower and COP was presented 24% higher values than defrosting condition. Therefore, defrosting for cooling coil of refrigeration and low temperature storage was effected on operation and performance characteristics of equipment. This highly effects on real refrigeration apparatus which is operated in year-around.

• Journal of ILASS-Korea
• /
• v.25 no.3
• /
• pp.111-118
• /
• 2020

This paper describes the effect of DME, biodiesel blended fuels on the macroscopic spray characteristics in a high pressure diesel injection system using Background Oriented Schlieren (BOS) method. The BOS method for visualization of impingement evaporation sprays to analyze macroscopic spray properties and evolutionary processes. In this work, the blending ratio of DME in the blended fuel are 0, 50, 100% by weight ratio. In order to investigate the macroscopic impinged spray characteristics under the various injection parameters and blending ratio. In this work, a mini-sac type single-hole nozzle injector with nozzle hole was length 0.7 mm and diameter of 0.3 mm was used. According to the result, the spray area of the collision wall increased as the DME mixing ratio increased, and the evolutionary pattern showed a stepwise increase due to the collision effect of the wall. Also, results of impinged spray area were increased according to increasing injection pressure.

• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.299-305
• /
• 2000

In this study, the characteristics of transmitted vibration on hand-arm system are examined when operating electric hand tools. Also through the correlation analysis between anthroponetric data and transmitted vibration, and comparison study with appropriate amount of work done based on the ISO criteriaa, the basic data for the ergonomic work design can be presented. The types of electric tools and works for the experiment are drill (general type and impact type), grinder, wire brush and steel to analyze the characteristics of transmitted vibrations, the amount of transmitted vibrations in X, Y and Z direction at tool(T), hand(H), wrist(W), and the joint between foream and upper arm(A) were measured at the frequency range of 6.3∼1000[HZ]. Also, the limit of human exposure to vibration, and the response of frequency were conducted.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.968-971
• /
• 2002

Hole injection characteristics have been investigated with various metal anodes such as Ni, Pt, Cu, and AI for the top emission polymer light emitting diodes (PLEDs). Devices were composed of metal anode, Poly(3,4-ethylenedioxythiophene) doped with polystyrene sultponated acid (PEDT:PSS), poly [2-methoxy-5-(2-ethylhexyoxy)-1,4-phenylene-vinylene] (MEH-PPV) and Al cathode. The hole injection from ITO anode has been also investigated for the comparison. The I-V characteristics of the PLEDs with different metal anodes were measured. The work function of the anode is strongly related to the hole injection of the device. The current density of the device with Ni anode with higher work function was higher than that of the device with ITO or AI anode at the same operating voltage.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.5
• /
• pp.519-529
• /
• 2015

Objective: This study aims to analyze the characteristics of occupational accidents and injuries of telecommunications line and cable workers by type of workplace and operational process of cabling service and to provide baseline data in establishing the preventive policies for occupational accidents and injuries. Background: In order to set up the preventive policies for occupational injuries and illness systematically, the accident analysis by industry should be preceded. To establish more effective policies, it should be done by occupation for persons who work in various kinds of occupation rather than by industry for persons who do in the same occupation. Method: In this study, the 176 occupational accidents and injuries were classified by type of workplace - indoor (inside building) and outdoor (at the top of utility pole, in a manhole, or in the fields) - and also done by operational process involved at the time of the accident. By analyzing the characteristics of occupational injuries and illness by type of workplace and operational process, respectively, this study can be helpful in establishing the preventative policies for occupational accidents and injuries. Results: The characteristics of occupational accidents and injuries by type of workplace showed that there were differences in terms of accident rate between indoor and outdoor on age of the injured, while not on employment-size and work experience of the injured. In addition, the characteristics on accident type, agency of accident, parts of body affected, and operational process between indoor and outdoor workplaces were statistically different each other. Conclusion and Application: The findings of occupational accidents' characteristics can be applied to the establishment of systematic preventative policies for occupational accidents of telecommunications line/equipment workers.

• Journal of Biosystems Engineering
• /
• v.43 no.2
• /
• pp.83-93
• /
• 2018

Purpose: This study derived the consumed power and load characteristics of a tillage operation performed in an upland field located in Seomyeon, Chuncheon, Rep. Korea, where potatoes and cabbages were cultivated in two crops. Methods: A plow and rotavator were mounted on a tractor with 23.7 kW of rated power to perform the tillage operation. The work conditions were determined, considering the actual working speed of the tillage operation performed by the local farmers. The power consumption of the rear axle, engine, and power take-off (PTO), PTO torque, and tractive force were measured under each work condition. The consumed power and load characteristics were analyzed using their average values. Results: The rotary-tillage operation consumed more engine power than the plow operation for the same tractor-transmission gear condition. The PTO in the rotary-tillage operation and the rear axle in the plow operation consumed the most power. The power consumption of the engine and the PTO for the rotary-tillage operation tended to increase as the transmission gears of the tractor and the PTO became higher. In contrast, the rear-axle power consumption was insignificant. In addition, the PTO torque tended to rise as the tilling pitch increased. For the plow operation, the drawbar power and the rear axle power accounted for 68-90% of the engine power. The engine and rear axle power, drawbar power, and tractive force tended to rise as the working speed increased. Conclusions: The power consumption and load characteristics differed for the plow and rotary-tillage operations. They may also differ depending on the soil conditions. Therefore, the power consumption and load characteristics in various work environments and regions should be analyzed, and reflected in the design of tractors and working implements. The results derived from this study can be used as a reference for such designs.

• Korean Journal of Community Nutrition
• /
• v.5 no.4
• /
• pp.672-682
• /
• 2000

The purpose of this study was to identify the effect of job characteristics, job performance and organizational commitment on job satisfaction of hospital dietitians. The first survey was carried out on 74 hospital dietitians to determine their demographic characteristics, job characteristics, organizational commitment, and job satisfaction. The second survey was carried out on 47 hospital foodservice dietitians to determine their job performance. Thirty-two percent of the subjects were aged between 26 and 30, and 62.2% had Bachelor's degrees. The dietitians felt most satisfied by their co-workers, followed by the work-itself, supervision, pay, and promotion possibilities. Dietitians who had a higher education were satisfied with pay and supervision. The longer the length of employment, the more the satisfaction with the work-itself and pay, plus the higher the monthly wage the more the satisfaction with the work-itself, pay, supervision, and co-workers. lob satisfaction was high in the group that scored high on autonomy, feedback, task identity, and friendship of in the job characteristic inventory. The job performances of nutrition counseling(r= 0.469, p < 0.01), nutrition education(r= 0.446, p < 0.01) and management of therapeutic diet(r= 0.394, p < 0.01) were positively correlated with job satisfaction. The $R^2$for the multiple regression model was 0.677, indicating that 67.7% of the variance in job satisfaction could be accounted for by feedback, organizational commitment, nutrition counseling performance, and nutrition education performance. In conclusion, the level of job satisfaction for hospital dietitians would appear to improve with increased feedback, organizational commitment, and opportunity for nutrition counseling and nutrition education.

• Journal of KIBIM
• /
• v.10 no.2
• /
• pp.12-20
• /
• 2020

Recently, interest in BIM technology has been growing in the domestic construction market as the number of construction projects requiring the application of BIM technology has increased. The use of BIM allows the use of various visualization functions through 3D models as well as drawing interference review, quantity calculation and integrated management of information. In particular, estimates of construction costs based on BIM can increase work efficiency by reducing the burden of calculating construction costs and managing them. In order to increase the efficiency of BIM-based cost estimates, it is necessary to improve the correlation between the BoQ(Bill of Quantity) information and the BIM model. For this purpose, the ratio of the amount and item to the detailed construction of the current BoQ was analyzed, especially the problem of the calculation of construction cost in the window work in this study. In addition, we would like to suggest a method for systematically linking the BoQ information with the BIM model by improving the BoQ information structure of the window work. It is expected that this will increase the efficiency of the quantity calculation and analysis work of construction cost of window work. In addition, it is expected that this method will help to analyze and predict changes in construction cost of windows and doors by facility characteristics and type.